How to Service and Repair the Air Bag Sensor to Ensure Safety and Proper Operation on Ford E-250 Econoline?

It is essential to put on safety glasses during Air Bag Electronic Crash Sensor (ECS) service and repair to ensure personal safety when deployment occurs by chance. Memory saver devices should not be used since they elevate the danger of personal injuries. A proper working RCM depends on its correct orientation thus a thorough examination should be conducted on the mounting bracket when evaluating damage to the RCM after a motor vehicle collision regardless of air bag deployment. The workspace which supports the RCM should return to its factory state. Detect any damage in the sensor brackets as well as wiring connections after a collision event by replacing broken SRS components and recorrecting their proper alignment. The ECS module remains vulnerable to static electricity damage and vehicles with aftermarket devices using 75 amps or higher current draw experience voltage spikes that hurt the ECS module. The procedure starts with system depowering followed by removal of RH cowl side trim panel part number 02345 to disconnect the ECS module electric connector through disengaging its locking clip and next removing the three retaining bolts for ECS module extraction. The ECS installation procedure involves these steps: Position the device, bolt it down, connect the electrical connector, activate the locking clip and afterward reinstall the RH cowl side trim panel followed by reconnecting power. Vehicle release depends on complete operation and no detected faults in the SRS.

OEM Ford E-250 Econoline Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Air Bag Sensors found

View related parts
Ford E-250 Econoline Air Bag Sensor, Center Part Number: F5UZ-14B004-C
$121.95 MSRP: $168.70
You Save: $46.75 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor
- Position: Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1996 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Air Bag Sensor, Driver Side Part Number: F5UZ-14B004-B
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1996 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Air Bag Sensor Part Number: F7UZ-14B004-DA
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor; Front Sensor
- Manufacturer Note: Located on the upper rad. support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Control Module Part Number: F7UZ-14B056-CA
Product Specifications
- Other Name: Sensor Assembly; Diagnostic Module
- Manufacturer Note: Sensor and module, passenger side kick panel, w/driver and passenger airbag, w/pretensioners for both front seatbelts
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Control Module Part Number: F7UZ-14B056-BA
Product Specifications
- Other Name: Sensor Assembly
- Manufacturer Note: Sensor and module, passenger side kick panel, w/driver airbag only, w/pretensioners for both front seat belts
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Air Bag Sensor, Driver Side Part Number: F4UZ-14B004-B
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Left; Front Sensor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Air Bag Sensor, Passenger Side Part Number: 5C2Z-14B004-A
Product Specifications
- Other Name: Sensor Assembly; Air Bag Impact Sensor, Right; Front Sensor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1996 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS

Ford E-250 Econoline Air Bag Sensor

OEM Air Bag Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Air Bag Sensor with long life and a perfect fit. Come to our website and find genuine Ford E-250 Econoline parts. We keep a wide inventory of OEM E-250 Econoline parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford E-250 Econoline Air Bag Sensor Parts and Q&A

Air Bag Sensor
F7UZ-14B004-DA
Q: How to Service and Repair the Air Bag Sensor to Ensure Safety and Proper Operation on Ford E-250 Econoline?
A:
It is essential to put on safety glasses during Air Bag Electronic Crash Sensor (ECS) service and repair to ensure personal safety when deployment occurs by chance. Memory saver devices should not be used since they elevate the danger of personal injuries. A proper working RCM depends on its correct orientation thus a thorough examination should be conducted on the mounting bracket when evaluating damage to the RCM after a motor vehicle collision regardless of air bag deployment. The workspace which supports the RCM should return to its factory state. Detect any damage in the sensor brackets as well as wiring connections after a collision event by replacing broken SRS components and recorrecting their proper alignment. The ECS module remains vulnerable to static electricity damage and vehicles with aftermarket devices using 75 amps or higher current draw experience voltage spikes that hurt the ECS module. The procedure starts with system depowering followed by removal of RH cowl side trim panel part number 02345 to disconnect the ECS module electric connector through disengaging its locking clip and next removing the three retaining bolts for ECS module extraction. The ECS installation procedure involves these steps: Position the device, bolt it down, connect the electrical connector, activate the locking clip and afterward reinstall the RH cowl side trim panel followed by reconnecting power. Vehicle release depends on complete operation and no detected faults in the SRS.