How to service the LH exhaust manifold on Ford E-250 Econoline?

Start exhaust manifold servicing by taking out the oil level indicator extension together with the tube and O-ring then discard them both. After supporting the vehicle you should remove the engine cover. The service of LH exhaust manifold begins by disconnecting LH Heated Oxygen Sensor (H02S) electrical connector and removing Y-pipe connecting bolts to the exhaust manifold. The removal of LH exhaust manifold requires you to remove the LH stud bolts as well as bolts in order to separate the manifold apart from its gasket. Discard the old gasket. The new gasket should be installed when replacing components while following the bolt tightening sequence in reverse order during reinstallation.

How to service the right-hand exhaust manifold on Ford E-250 Econoline?

Service of the right-hand exhaust manifold starts with removal of the engine cover together with the EGR valve to exhaust manifold tube. Start the EGR valve tube service by removing its sensor electrical connector first followed by disconnecting both fittings for upper and lower tube ends before removing the EGR valve to exhaust manifold tube. Start the next step by removing the electrical connector of the right-hand Heated Oxygen Sensor (H02S). The technician needs to first secure the vehicle then unfasten the two nuts which connect the three-way catalytic converter to the exhaust manifold while separating the Y-pipe from the right-hand exhaust manifold. Uninstall the right-hand exhaust manifold together with its gasket through bolt removal of stud bolts and bolts before disposing of the old gasket. New gaskets should be used during installation followed by careful bolt tightening starting from the specified order to perform the reverse procedure.

OEM Ford E-250 Econoline Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Exhaust Manifolds found

View related parts
Ford E-250 Econoline Exhaust Manifold, Passenger Side Part Number: XL3Z-9430-GA
$61.49 MSRP: $89.50
You Save: $28.01 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2002 Ford E-250 Econoline | Base, XL | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold, Passenger Side Part Number: F4TZ9430A
$177.30 MSRP: $245.28
You Save: $67.98 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1993 Ford E-250 Econoline | Base, Custom, XL | 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold, Driver Side Part Number: YC2Z-9431-EA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2002 Ford E-250 Econoline | Base, XL | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold, Passenger Side Part Number: XC2Z-9430-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Manufacturer Note: RH, FROM 8/5/98
- Position: Passenger Side
- Replaces: F85Z-9430-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999 Ford E-250 Econoline | Base, XL | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold Part Number: F75Z-9430-HB
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left, Right; Manifold
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford E-250 Econoline | Base, XL | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold, Passenger Side Part Number: 5L3Z-9430-AA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: XL3Z-9430-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold, Driver Side Part Number: XC2Z-9431-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: F8UZ-9431-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999 Ford E-250 Econoline | Base, XL | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold Part Number: F65Z-9431-A
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left, Right; Manifold
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold, Driver Side Part Number: F5TZ-9431-A
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1996 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold, Driver Side Part Number: F4TZ-9431-E
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1996 Ford E-250 Econoline | Base, Custom, XL | 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold, Driver Side Part Number: F4TZ-9431-D
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford E-250 Econoline | Base, XL | 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold, Passenger Side Part Number: F4TZ-9430-E
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1996 Ford E-250 Econoline | Base, Custom, XL | 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold, Passenger Side Part Number: F4TZ-9430-D
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford E-250 Econoline | Base, XL | 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold, Passenger Side Part Number: E6AZ9430G
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1991 Ford E-250 Econoline | Base, Custom, XL | 8 Cyl 5.0 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold, Passenger Side Part Number: E5TZ9430D
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Radiator Cap; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1991 Ford E-250 Econoline | Base, Custom, XL | 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Manifold Part Number: E4TZ-9426-D
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1986 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG
View related parts
Ford E-250 Econoline Exhaust Manifold, Driver Side Part Number: 5L3Z-9431-A
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: XL3Z-9431-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Econoline Exhaust Manifold Part Number: F65Z-9430-A
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left, Right; Manifold
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS

Ford E-250 Econoline Exhaust Manifold

OEM Exhaust Manifold boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Exhaust Manifold with long life and a perfect fit. Come to our website and find genuine Ford E-250 Econoline parts. We keep a wide inventory of OEM E-250 Econoline parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford E-250 Econoline Exhaust Manifold Parts and Q&A

Exhaust Manifold, Driver Side
YC2Z-9431-EA
Q: How to service the LH exhaust manifold on Ford E-250 Econoline?
A:
Start exhaust manifold servicing by taking out the oil level indicator extension together with the tube and O-ring then discard them both. After supporting the vehicle you should remove the engine cover. The service of LH exhaust manifold begins by disconnecting LH Heated Oxygen Sensor (H02S) electrical connector and removing Y-pipe connecting bolts to the exhaust manifold. The removal of LH exhaust manifold requires you to remove the LH stud bolts as well as bolts in order to separate the manifold apart from its gasket. Discard the old gasket. The new gasket should be installed when replacing components while following the bolt tightening sequence in reverse order during reinstallation.
Exhaust Manifold, Passenger Side
XL3Z-9430-GA
Q: How to service the right-hand exhaust manifold on Ford E-250 Econoline?
A:
Service of the right-hand exhaust manifold starts with removal of the engine cover together with the EGR Valve to exhaust manifold tube. Start the EGR valve tube service by removing its sensor electrical connector first followed by disconnecting both fittings for upper and lower tube ends before removing the EGR valve to exhaust manifold tube. Start the next step by removing the electrical connector of the right-hand Heated Oxygen Sensor (H02S). The technician needs to first secure the vehicle then unfasten the two nuts which connect the three-way catalytic converter to the exhaust manifold while separating the Y-pipe from the right-hand exhaust manifold. Uninstall the right-hand exhaust manifold together with its gasket through bolt removal of stud bolts and bolts before disposing of the old gasket. New gaskets should be used during installation followed by careful bolt tightening starting from the specified order to perform the reverse procedure.