FordParts
My Garage
My Account
Cart
OEM Ford E-250 Seat Cushion
Seat Pad Cushion- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
17 Seat Cushions found
Ford E-250 Seat Cushion Pad, Rear Part Number: 8C2Z-1663840-A
$286.69 MSRP: $396.61You Save: $109.92 (28%)Ships in 1-2 Business Days
Ford E-250 Seat Cushion Pad, Front Center Passenger Side Part Number: YC2Z-15632A22-AA
$99.26 MSRP: $144.48You Save: $45.22 (32%)
Ford E-250 Seat Cushion Pad, Front Part Number: 9C2Z-15632A22-A
$92.07 MSRP: $134.02You Save: $41.95 (32%)Ships in 1-2 Business Days
Ford E-250 Seat Back Pad, Front Driver Side Part Number: 1C2Z-1564811-AA
$102.52 MSRP: $149.23You Save: $46.71 (32%)Ships in 1-2 Business Days
Ford E-250 Seat Cushion Pad, Front Part Number: 1C2Z-15632A22-AA
$120.31 MSRP: $175.12You Save: $54.81 (32%)Ships in 1-2 Business Days
Ford E-250 Seat Back Pad, Front Driver Side Part Number: AC2Z-1564811-A
$178.56 MSRP: $259.92You Save: $81.36 (32%)Ships in 1-2 Business DaysFord E-250 Seat Back Pad, Front Driver Side Part Number: 1C2Z-1564810-BA
$78.06 MSRP: $107.99You Save: $29.93 (28%)Ships in 1-2 Business DaysFord E-250 Seat Back Pad, Front Driver Side Part Number: AC2Z-1564811-B
$177.48 MSRP: $258.33You Save: $80.85 (32%)Ships in 1-2 Business DaysFord E-250 Seat Back Pad, Front Passenger Side Part Number: AC2Z-1564810-A
$180.57 MSRP: $262.83You Save: $82.26 (32%)Ships in 1-3 Business Days
Ford E-250 Seat Cushion Pad, Rear Center Part Number: 8C2Z-1663840-B
Ford E-250 Seat Back Pad, Center Part Number: AC2Z-1664810-A
Ford E-250 Seat Cushion Pad, Front Center Part Number: 9C2Z-16632A22-A
Ford E-250 Seat Cushion
OEM Seat Cushion boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Seat Cushion with long life and a perfect fit. Come to our website and find genuine Ford E-250 parts. We keep a wide inventory of OEM E-250 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.
The Seat Cushion is a part used in enhancing a comfortable driving experience in Ford E-250 cars, widely known for their operations. It is an item used for avoiding fatigue and other problems like back pains and areas of pressure on the back while on a long drive. Available in universal sizes that will fit the Ford E-250 perfectly, this Seat Cushion can be made from beaded or sheepskin and these materials are material that offers the premier support while at the same time allowing air and heat exchange to occur. This is additionally fixated the headrest with beaded structure, which provides extra rub down impact intended for increasing circulation and cooling the driver; sheepskin also helps inserted breathability and conservation of heat in changing climate conditions. These aspects positively impact the Ford E-250's performance and security while enabling the vehicle to undergo lengthy travels without causing discomfort due to improper chair designs. Seat Cushion can be noted that it has a stamping in the automotive market owing to its ease of utility and its practicality; therefore, it should be underlined that such a part is highly beneficial for any buyer of Ford E-250 cars. This is why the Seat Cushion with its primary interest on comfort and support is evidence of the Ford brand's sublimating and authoritative attitude towards its users to provide only the premier for every Ford E-250 ride.
Ford E-250 Seat Cushion Parts and Q&A
- Q: How to remove and replace the rear bucket seat cushion on Ford E-250?A:Shifting to the rear bucket seat cushion replacement demands the proper tool for releasing the detachable safety belt anchor system from its seat position. You should start by operating the seat latch release handle followed by moving the seat to the right and unhooking it from the seat latch striker. During right-hand seat installation remove the bolt and detachable safety belt anchor while tightening it to 40 Nm (30 lb-ft) along with removing the locator spacer for proper later reinstallation. When installing the left-hand seat begin by removing three bolts then the lower anchors and tethers for children bracket followed by releasing two lower J-clips which enables unfastening the bracket while tightening it to 25 Nm (18 lb-ft). Take out the seat pedestal as well as the four track nuts followed by installation with 25 Nm (18 lb-ft) torque. Unfasten the three screws along the left-hand side shield of the cushion then use a screwdriver to remove the screws from the right-hand side shield of the cushion. During the bolt removal procedure for the four cushion frame bolts users must adjust the seat track as required for right-hand seat accessibility before securing them to 25 Nm (18 lb-ft) torque levels. Follow this up by disconnecting the cushion assembly which must be installed by performing the removal steps in reverse order.
- Q: How to remove and replace the front seat cushion on Ford E-250?A:The front seat cushion process of removal and replacement begins by first making sure safety functions are operational then avoiding all tests on electrical pretensioner connectors because accidental deployments might result in fatal outcomes. Start by taking the seat out of its vehicle position. Adjust the lumbar support of the seat to its fully relaxed position before removing the adjustment knob from the area. The second step of the procedure requires users to unscrew the side shield screw situated below the lumbar adjust knob. The safety belt buckle and pretensioner become accessible after removing the rear screw from underneath the seat as well as the front screw and carefully pulling the cushion inboard side shield away from its position. Upward rotating the shield frees the rear pushpin mount which allows you to unclip the safety belt buckle and pretensioner boot retaining clips. It is necessary to separate the J-clips and release the hook-and-loop strips at the rear inboard of the cushion trim cover when the seat does not have a cushion inboard side shield. Similarly, the pin-type retainer needs to be removed. Seats with lumbar support require the disconnection of the cable after removing the two screws that hold the lumbar actuator. The cable then routes out from under the seat. Begin by unscrewing the mounting screw to the recliner handle followed by the screw that maintains the outboard sider shield of the cushion. Both fasteners are positioned under the seat near the seatback. You should remove both the front screw along with seat control switch electrical connector if the seat is powered and the cushion outboard side shield if the seat has manual track adjustment. After disconnecting all wire harness pin-type retainers that connect to the cushion frame operators should remove at least four seat track-to-cushion frame bolts with a torque setting of 25 Nm (18 lb-ft). Conclude the replacement by performing the steps in reverse order to install the new seat cushion.
