How to service the front seat backrest Seat Covers on Ford E-250?

You should start the front seat backrest cover service from removing the armrest before installing a new crown washer when reinstalling it. Start by releasing the hook-and-loop connection at the armrest trim cover rear side for accessing the bolt and removing both armrest as well as crown washer components before torquing the bolt to 35 Nm (26 lb-ft). First disconnect the backrest trim cover through the process of releasing the J-clip located at the bottom of the backrest. Patients should handle the seat backrest trim cover with care during hook-and-loop separation to prevent severing it from the seat backrest foam pad. The backrest trim cover must be inverted before you can separate its hook-and-loop strips while removing the backrest trim cover. The reverse procedure for removal needs to be performed to correctly install the components.

How to service the Seat Covers for the rear bench seat on Ford E-250?

The first step to service the rear cushion cover of the seat involves releasing the built-in belt anchor(s) from the seat with help of an appropriate tool when present. You should replace the seat latch striker together with the seat if the seat mounting latches from the bench seat risers show damage. First remove the rear seat by pulling its two seat latch release straps and then remove the ten bolts along with two risers from the seat cushion frame while tightening these components to 51 Nm (38 lb-ft) torque when re-installing. Detach and install bolt and detachable safety belt anchor while tightening to specific torque of 60 Nm (44 lb-ft). Relax the rear J-clips from both backrest and cushion covers to reach the safety belt retractor anchor bolt which needs to be removed. Placing the safety belt anchor(s) through the seat cushion opening requires tightening them to 75 Nm (55 lb-ft) torques meets the recommended specifications. To finish the installation release the two J-clips at the back corners of the cushion cover and all remaining J-clips before removing the rear bolts which should be tightened to 51 Nm (38 lb-ft) on all bolts and four bolts when installing a 4-passenger bench seat. Secure the four backrest-to-cushion outboard bolts at 75 Nm (55 lb-ft) torques when reattaching them. To achieve cushion cover removal avoid tearing the foam pad while detaching the cushion from the backrest frames by flipping the cover inside out and releasing its retainers sequentially. The safety belt buckle passes through openings in the cushion cover until installation time when you reverse the procedure for reinstallation. Verify the safety belt webbing remains untwisted and safety belts along with buckles remain accessible to occupants.

OEM Ford E-250 Seat Covers

Car Seat Protector Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

156 Seat Covers found

View related parts
Ford E-250 Cushion Cover, Front Passenger Side Part Number: AC2Z-1562900-BA
$957.85 MSRP: $1419.03
You Save: $461.18 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Right; Seat Cover, Front Right
- Manufacturer Note: (CE)
- Position: Passenger Side
- Replaced by: BC2Z-1562900-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Cushion Cover, Front Driver Side Part Number: 9C2Z-1562901-CA
$136.95 MSRP: $199.35
You Save: $62.40 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Left
- Manufacturer Note: (AE)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Cushion Cover, Front Driver Side Part Number: AC2Z-1562901-BA
$154.32 MSRP: $224.63
You Save: $70.31 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left; Seat Cover, Front Left
- Manufacturer Note: (CE)
- Position: Driver Side
- Replaces: 9C2Z-1562901-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-250 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 6.0L V8, 6.8L V10, 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Cushion Cover, Front Driver Side Part Number: BC2Z-1562901-CA
$173.49 MSRP: $252.53
You Save: $79.04 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left; Seat Cover, Front Left
- Manufacturer Note: (AE)
- Position: Driver Side
- Replaces: AC2Z-1562901-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2014 Ford E-250 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 6.0L V8, 6.8L V10, 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Cushion Cover, Front Driver Side Part Number: DC2Z-1662901-AA
$176.70 MSRP: $257.20
You Save: $80.50 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left; Seat Cover, Front Left
- Manufacturer Note: (ME)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Cushion Cover, Front Passenger Side Part Number: DC2Z-1662900-AA
$176.70 MSRP: $257.20
You Save: $80.50 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Right; Seat Cover, Front Right
- Manufacturer Note: (ME)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Seat Back Cover, Front Passenger Side Part Number: DC2Z-1564416-AA
$203.32 MSRP: $295.95
You Save: $92.63 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Manufacturer Note: (ME)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Cushion Cover, Front Passenger Side Part Number: AC2Z-1662900-AA
$281.83 MSRP: $413.85
You Save: $132.02 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Right
- Manufacturer Note: (ME)
- Position: Passenger Side
- Replaces: 9C2Z-1662900-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford E-250 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 6.0L V8, 6.8L V10, 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Seat Back Cover, Front Driver Side Part Number: 6C2Z-1564417-BA
$322.56 MSRP: $473.65
You Save: $151.09 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Manufacturer Note: (CE)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-250 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Seat Back Cover, Front Driver Side Part Number: 9C2Z-1564417-CA
$181.32 MSRP: $250.83
You Save: $69.51 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Manufacturer Note: (AE)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L FLEX
View related parts
Ford E-250 Seat Back Cover, Front Passenger Side Part Number: BC2Z-1564416-BA
$162.28 MSRP: $250.43
You Save: $88.15 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Manufacturer Note: (CE)
- Position: Passenger Side
- Replaces: AC2Z-1564416-BA, 9C2Z-1564416-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-250 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 6.0L V8, 6.8L V10, 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Seat Back Cover, Front Driver Side Part Number: BC2Z-1564417-BA
$172.05 MSRP: $250.43
You Save: $78.38 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Manufacturer Note: (CE)
- Position: Driver Side
- Replaces: 9C2Z-1564417-BA, AC2Z-1564417-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-250 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 6.0L V8, 6.8L V10, 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Cushion Cover, Front Passenger Side Part Number: BC2Z-1562900-CA
$173.49 MSRP: $252.53
You Save: $79.04 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Right; Seat Cover, Front Right
- Manufacturer Note: (AE)
- Position: Passenger Side
- Replaces: AC2Z-1562900-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2014 Ford E-250 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 6.0L V8, 6.8L V10, 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Seat Back Cover, Front Driver Side Part Number: BC2Z-1564417-CA
$174.61 MSRP: $254.17
You Save: $79.56 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Manufacturer Note: (AE)
- Position: Driver Side
- Replaces: AC2Z-1564417-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2014 Ford E-250 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 6.0L V8, 6.8L V10, 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Seat Back Cover, Front Driver Side Part Number: BC2Z-1564417-AB
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Left
- Manufacturer Note: (MW)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Cushion Cover, Front Driver Side Part Number: AC2Z-1662901-DB
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left; Seat Cover, Front Left
- Manufacturer Note: (LW)
- Position: Driver Side
- Replaces: 9C2Z-1662901-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-250 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 6.0L V8, 6.8L V10, 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Cushion Cover, Front Driver Side Part Number: AC2Z-1662901-DA
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cushion Cover, Front Left; Seat Cover, Front Left
- Manufacturer Note: (LE)
- Position: Driver Side
- Replaces: 9C2Z-1662901-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-250 | Base, Base Level 2, Chateau, RV Prep, XL, XLT | 4.6L V8, 5.4L V8, 6.0L V8, 6.8L V10, 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Seat Back Cover, Front Passenger Side Part Number: 6C2Z-1564416-BA
Product Specifications
- Other Name: Cover Assembly - Seat Back; Seat Back Cushion Cover, Front Right
- Manufacturer Note: (AE)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-250 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Cushion Cover, Front Driver Side Part Number: 6C2Z-1562901-AA
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Left
- Manufacturer Note: (CE)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-250 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Cushion Cover, Front Passenger Side Part Number: 4C2Z-1562900-AAA
Product Specifications
- Other Name: Cover Assembly - Seat Cushion; Seat Cover, Front Right
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-250 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

| Page 1 of 8 |Next >

1-20 of 156 Results

Ford E-250 Seat Covers

OEM Seat Covers boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Seat Covers with long life and a perfect fit. Come to our website and find genuine Ford E-250 parts. We keep a wide inventory of OEM E-250 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford E-250 Seat Covers are a great way to protect your van's factory upholstery from spills, scratches, and everyday wear. They also make your van interior appear more attractive and comfortable. The Ford van's Seat Covers are universal slip-on, custom leather upholstery or pet protector, allowing E-250 owners to choose coverage from quick install to a full makeover. From leather or sheepskin, the selections range over a variety of colors and materials so the Ford cabin can coordinate to personal preference while the E-250 seats remain protected against wear. The Seat Covers serve the same purpose of forming a barrier so that damage and stains are prevented while keeping the fabric safe and maintaining its value. Cost of the Seat Covers can vary by complete unit, from a single arched section of material to a kit that may contain the E-250 setup, foam, trim, and other components. Varies types of Seat Covers are offered to drivers, allowing them to choose standard maintenance of the original feel or upgrade it without changing the original seat frame.

Ford E-250 Seat Covers Parts and Q&A

Seat Back Cover, Front Driver Side
6C2Z-1564417-BA
Q: How to service the front seat backrest Seat Covers on Ford E-250?
A:
You should start the front seat backrest cover service from removing the Armrest before installing a new crown washer when reinstalling it. Start by releasing the hook-and-loop connection at the armrest trim cover rear side for accessing the bolt and removing both armrest as well as crown washer components before torquing the bolt to 35 Nm (26 lb-ft). First disconnect the backrest trim cover through the process of releasing the J-clip located at the bottom of the backrest. Patients should handle the seat backrest trim cover with care during hook-and-loop separation to prevent severing it from the seat backrest foam pad. The backrest trim cover must be inverted before you can separate its hook-and-loop strips while removing the backrest trim cover. The reverse procedure for removal needs to be performed to correctly install the components.
Seat Back Cover, Rear
BC2Z-1666600-DA
Q: How to service the Seat Covers for the rear bench seat on Ford E-250?
A:
The first step to service the rear cushion cover of the seat involves releasing the built-in belt anchor(s) from the seat with help of an appropriate tool when present. You should replace the seat latch striker together with the seat if the seat mounting latches from the bench seat risers show damage. First remove the rear seat by pulling its two seat latch release straps and then remove the ten bolts along with two risers from the seat cushion frame while tightening these components to 51 Nm (38 lb-ft) torque when re-installing. Detach and install bolt and detachable safety belt anchor while tightening to specific torque of 60 Nm (44 lb-ft). Relax the rear J-clips from both backrest and cushion covers to reach the safety belt retractor anchor bolt which needs to be removed. Placing the safety belt anchor(s) through the seat cushion opening requires tightening them to 75 Nm (55 lb-ft) torques meets the recommended specifications. To finish the installation release the two J-clips at the back corners of the cushion cover and all remaining J-clips before removing the rear bolts which should be tightened to 51 Nm (38 lb-ft) on all bolts and four bolts when installing a 4-passenger bench seat. Secure the four backrest-to-cushion outboard bolts at 75 Nm (55 lb-ft) torques when reattaching them. To achieve cushion cover removal avoid tearing the foam pad while detaching the cushion from the backrest frames by flipping the cover inside out and releasing its retainers sequentially. The safety belt buckle passes through openings in the cushion cover until installation time when you reverse the procedure for reinstallation. Verify the safety belt webbing remains untwisted and safety belts along with buckles remain accessible to occupants.