How to Service and Repair the Fuel Filler Hose on Ford Edge?

Start the initial step of filling tank repair work by placing the automobile in neutral gear position on a hoist. The service and repair of the fuel tank filler pipe begins with disconnecting the battery ground cable because electrical issues may occur. Twist the fuel tank filler cap counterclockwise only a quarter turn to break loose the thread connections and place it aside. Use a suitable semi-rigid fuel drain tube with 120 inches length to reach the fuel tank through the fuel tank filler pipe. A full fuel tank will cause the fuel to drop beneath the inlet. The fuel storage tanker should be connected to the drain tube to extract about 3 gallons of fuel from a complete tank. Three retaining screws holding the fuel tank filler pipe flange should be removed while tightening them to 3 Nm (27 lb-in) when reinstalling. Start by disconnecting the left rear wheel together with the tire then unfasten the ten screws and four pin-type retainers which secure the left rear splash shield. When working with the fuel compartment pipe ensure caution because fuel remains present in it. Drain any trapped fuel into a suitable container after unfurling the clamp and tightening it to 4 Nm (35 lb-in). Reinstall the fuel tank filler pipe bracket with two bolts while tightening them to 9 Nm (80 lb-in). Reverse all steps of removal to reassemble both the new and repaired fuel tank filler pipe onto the vehicle. Follow safe operation guidelines when working with fuel since they protect against ignition and personal injuries.

OEM Ford Edge Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Fuel Filler Hoses found

View related parts
Ford Edge Filler Tube Part Number: 8U5Z-17B068-K
$6.36 MSRP: $9.02
You Save: $2.66 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Funnel; Fuel Filler Neck Adapter; Fuel Filler Hose; Tube; Filler
- Replaces: 8U5Z-17B068-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015 Ford Edge | SE, SEL, Sport, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Filler Hose Part Number: BT4Z-9047-A
$25.98 MSRP: $36.85
You Save: $10.87 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Filler Pipe; Fuel Filler Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford Edge | Limited, SE, SEL, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Filler Tube Part Number: 8U5Z-17B068-B
$6.11 MSRP: $8.67
You Save: $2.56 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Funnel; Fuel Filler Neck Adapter; Fuel Filler Neck Sleeve; Filler Neck Sleeve; Fuel Filler Hose; Fuel Tank Filler; Filler Pipe Tube; Tube; Filler
- Manufacturer Note: Attached To Underneath 42624 In Luggage Compartment
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2024 Ford Edge | Limited, SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Connector Hose Part Number: DG9Z-9047-C
$74.44 MSRP: $108.35
You Save: $33.91 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Filler Pipe; Fuel Filler Hose; Fuel Filler Neck; Filler Hose
- Replaces: DG9Z-9047-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Edge | SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Filler Neck Part Number: K2GZ-9034-C
$398.27 MSRP: $584.83
You Save: $186.56 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2023 Ford Edge | ST | 6 Cyl 2.7 L GAS
View related parts
Ford Edge Filler Neck Part Number: K2GZ-9034-B
$304.63 MSRP: $447.33
You Save: $142.70 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
- Replaced by: K2GZ-9034-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2024 Ford Edge | SE, SEL, ST-Line, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Edge Filler Neck Part Number: F2GZ-9034-D
$388.28 MSRP: $570.17
You Save: $181.89 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Filler Pipe
- Replaces: F2GZ-9034-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Edge | SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Filler Hose Part Number: 7T4Z-9047-A
Product Specifications
- Other Name: Hose - Filler Pipe; Fuel Filler Hose; Filler Neck Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Edge | Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS

Ford Edge Fuel Filler Hose

OEM Fuel Filler Hose boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Filler Hose with long life and a perfect fit. Come to our website and find genuine Ford Edge parts. We keep a wide inventory of OEM Edge parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Edge Fuel Filler Hose is required in the Ford Edge family of automobiles as it is instrumental in fueling the car efficiently while at the same time boosting the performance of the car and at the same time offer the much needed safety measure in case of an occurrence of some few eventualities. This Fuel Filler Hose is intended to be connected to the fuel fill cap inlet using clamps and screws so as to ensure that the hose is properly anchored and fixed hence creating a concrete connection base that will enhance the fuel system. Designed to fit most of the Ford Edge types, these include the SE, SEL, and ST, this Fuel Filler Hose is a critical component that directly contributes to the fuel or petro-Fuel flow, thus affecting the working efficiency of the car. The Ford Edge has a roomy interior and some potent motor choices such as the turbocharged four-cylinder and V6 engines; thus, the Fuel Filler Hose's reliability is even more crucial. This makes it very durable to owe to daily use and this has been accredited by many user of the Ford Edge. Moreover, the Fuel Filler Hose is incorporated to reduce the possibilities of fuel leaks which in turn increases safety. Some of these are its compatibility with higher fuel systems and flexibility in installation to fit the Ford edge car. In sum, this element is indispensable for any owner of the Ford Edge who wishes to preserve the vehicle's parameters and secure the highest safety level.

Ford Edge Fuel Filler Hose Parts and Q&A

Filler Hose
7T4Z-9047-A
Q: How to Service and Repair the Fuel Filler Hose on Ford Edge?
A:
Start the initial step of filling tank repair work by placing the automobile in neutral gear position on a hoist. The service and repair of the fuel tank filler pipe begins with disconnecting the battery ground cable because electrical issues may occur. Twist the fuel tank filler cap counterclockwise only a quarter turn to break loose the thread connections and place it aside. Use a suitable semi-rigid fuel drain tube with 120 inches length to reach the fuel tank through the fuel tank filler pipe. A full fuel tank will cause the fuel to drop beneath the inlet. The fuel storage tanker should be connected to the drain tube to extract about 3 gallons of fuel from a complete tank. Three retaining screws holding the fuel tank filler pipe flange should be removed while tightening them to 3 Nm (27 lb-in) when reinstalling. Start by disconnecting the left rear wheel together with the tire then unfasten the ten screws and four pin-type retainers which secure the left rear splash shield. When working with the fuel compartment pipe ensure caution because fuel remains present in it. Drain any trapped fuel into a suitable container after unfurling the clamp and tightening it to 4 Nm (35 lb-in). Reinstall the fuel tank filler pipe bracket with two bolts while tightening them to 9 Nm (80 lb-in). Reverse all steps of removal to reassemble both the new and repaired fuel tank filler pipe onto the vehicle. Follow safe operation guidelines when working with fuel since they protect against ignition and personal injuries.