First step when handling the steering wheel servicing involves positioning it straight ahead and turning off the ignition switch while taking out the key. The next task involves taking out the driver
Air Bag module. It is essential to take reference marks on the steering wheel and column shaft ahead of the installation. Next step is to remove the steering wheel nut but you should torque it to 35 Nm (26 lb-ft) when installing it. Disconnect the steering wheel switches electrical connector while using caution to prevent damage through a hammer strike on the shaft that could harm the steering column. A suitable puller device needs to be used to uninstall the steering wheel. The installation process ends when you perform the reverse steps of removal and adjust the steering wheel hub with its reference marker.