My Garage
Cart

OEM Ford Edge Tie Rod

Steering Tie Rod
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Tie Rods found

  • Ford Edge Tie Rod - DG9Z-3280-A
    Ford Edge Tie Rod Diagram - DG9Z-3280-A
    View related parts

    Ford Edge Inner Tie Rod, Front
    Part Number: DG9Z-3280-A

    $66.41 MSRP: $109.27
    You Save: $42.86 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Kit - Tie Rod; Steering Tie Rod End, Front Inner, Inner; Inner Tie Rod End; Tie Rod End
    • Position: Front Inner
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2015-2024 Ford Edge | SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
  • Ford Edge Tie Rod - 7T4Z-3280-A
    Ford Edge Tie Rod Diagram - 7T4Z-3280-A
    View related parts

    Ford Edge Inner Tie Rod
    Part Number: 7T4Z-3280-A

    $61.51 MSRP: $103.27
    You Save: $41.76 (41%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Rod; Steering Tie Rod End, Inner; Inner Tie Rod End; Tie Rod End
    • Position: Inner
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2007-2014 Ford Edge | Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
  • Ford Edge Tie Rod - F2GZ-3280-A
    Ford Edge Tie Rod Diagram - F2GZ-3280-A
    View related parts

    Ford Edge Inner Tie Rod
    Part Number: F2GZ-3280-A

    $85.56 MSRP: $143.64
    You Save: $58.08 (41%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Kit - Tie Rod; Inner Tie Rod End; Tie Rod End
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2015-2024 Ford Edge | SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Ford Edge Tie Rod

Welcome to our website where you can discover high-quality, genuine Ford Edge Tie Rod. We offer an extensive inventory of OEM Ford Edge Tie Rod at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Edge Tie Rod Parts Questions & Experts Answers

  • Q: How to service and repair the tie rod inner on Ford Edge?
    A: The procedure for tie rod inner servicing begins by removing the steering gear followed by pinion shaft and steering gear housing marking for accurate installation reference. Steering gears should be placed inside a soft-jaw vise for protection from damage occurred. The tie rod jam nut should be loosened before installation where it needs to be tightened to 90 Nm (66 lb-ft). You should remove the outer tie-rod end followed by the tie-rod jam nut before reinstalling the part by tightening the jam nut at 48 Nm (35 lb-ft). Both bellows boots must be detached prior to right-hand inner tie rod removal so technicians need to remove the 4 bellows clamps and the 2 steering gear bellows boots. Specific wrenches should be used to hold the piston shaft for removing the inner tie rod until the rod reaches a tightness of 103 Nm (76 lb-ft). Tightening of the inner tie rod begins with piston shaft holding before you use the new lock washer but make sure to crimp it after tightening is complete. The removal procedure should be reversed while all parts get cleaned thoroughly before reuse inspections and new parts should be installed.

Related Ford Edge Parts