Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2005-2010 Ford Escape | Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2005-2010 Ford Escape | Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2001-2006 Ford Escape | Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
Other Name: Pad - Brake; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Disc Brake Pad Set; Rear Pads
Position: Rear
Replaced by: SZ6Z-2200-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2020-2023 Ford Escape | Active, Base, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Ford Escape Brake Pads
Welcome to our website where you can discover high-quality, genuine Ford Escape Brake Pads. We offer an extensive inventory of OEM Ford Escape Brake Pads at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to Remove and Install Brake Pads in a Rear Disc Brake System on Ford Escape?
A: In order to change the brake pads, put the car in neutral on a hoist. Take off the Brake Caliper guide bolts and make sure they are tightened to 35 Nm during installation. Install the brake caliper, and take away the brake pads. Lastly, undo the removal procedure and install.
Q: How to service the front brake pads on Ford Escape?
A: In order to service the front brake pads, lift up the vehicle in neutral. Take off the Brake Caliper clip, dust boot caps and guide bolts. Tighten to 35 Nm (disc-drum) or 45 Nm (4-wheel disc) guide bolts. Grab the caliper, and take off the inboard and outboard brake pads. Installation It is in reversed order.