How to service the fuel injector and fuel rail safely and effectively on Ford Escape?

Safety during fuel injector and fuel rail service requires that you keep all areas free of smoking and open flame due to the presence of flammable mixtures. First empty the fuel system pressure then separate the battery ground cable. Start by separating the fuel supply tube quick connect coupling from the fuel rail before detaching both the fuel rail pressure and temperature vacuum tube and electrical connector. The initial step involves disconnecting four fuel injector electrical connectors before removing the nut allowing you to place the radio capacitor to the side. You should remove the wire harness retainer from the valve cover stud bolt followed by disconnecting the two pin-type wire harness retainers which secure the fuel rail. The process of repair begins with removing two fuel rail stud bolts which enables extraction of fuel rail assembly with its injectors. The mechanic should remove and discard eight fuel injector O-ring seals. Install new O-ring seals manufactured from resistant fuel material by oiling them with engine oil before fitting them into the fuel injectors with the retaining clips. Reinstall the combination of fuel rail and injectors while securing them by tightening the two fuel rail stud bolts to 23 Nm (17 lb-ft). The pin-type retainers should be positioned onto the fuel rail and the wire harness retainer should be mounted on the valve cover stud bolt. The radio capacitor needs placement before installation of the nut followed by torque adjustment to 10 Nm (89 lb-in). Among the final tasks is to connect the fuel injector electrical connectors followed by the fuel rail pressure and temperature vacuum tube electrical connector and fuel supply tube quick connect coupling at fuel rail and battery ground cable.

OEM Ford Escape Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Fuel Injectors found

View related parts
Ford Escape Injector Part Number: CJ5Z-9F593-B
$130.39 MSRP: $214.55
You Save: $84.16 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; GDI Fuel Injector; Fuel Injector
- Replaces: CM-5220, CJ5Z-9F593-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Escape | SE, SEL, Titanium | 4 Cyl 1.6 L GAS
View related parts
Ford Escape Injector Part Number: 9E5Z-9F593-A
$47.17 MSRP: $74.91
You Save: $27.74 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2023 Ford Escape | Hybrid, Limited, Limited Hybrid, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL Hybrid, SEL Plug-In Hybrid, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select Hybrid, Titanium Hybrid, Titanium Plug-In Hybrid, XLS, XLT | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Injector Part Number: BB5Z-9F593-B
$116.03 MSRP: $190.91
You Save: $74.88 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; GDI Fuel Injector; Fuel Injector
- Replaces: BB5Z-9F593-A, CM-5198
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Escape | SE, SEL, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Escape Injector Part Number: 9L8Z-9F593-A
$51.96 MSRP: $85.49
You Save: $33.53 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Escape | Limited, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Injector Part Number: FB5Z-9F593-C
$74.26 MSRP: $122.18
You Save: $47.92 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Replaces: CM-5252, FB5Z-9F593-A, FB5Z-9F593-B, CM-5241
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2019 Ford Escape | SE, SEL, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Escape Injector Part Number: DS7Z-9F593-DA
$66.96 MSRP: $110.18
You Save: $43.22 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Replaces: CM-5240, DS7Z-9F593-D, CM-5261, CM-5221, DS7Z-9F593-A, DS7Z-9F593-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Escape | SE, SEL, Titanium | 4 Cyl 1.5 L GAS
View related parts
Ford Escape Injector Part Number: 4L8Z-9F593-B
$63.25 MSRP: $106.18
You Save: $42.93 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Fuel Injection; Fuel Injector
- Replaces: 2C5Z-9F593-AA, 4L8Z-9F593-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Ford Escape | Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 6 Cyl 3.0 L GAS
View related parts
Ford Escape Injector Part Number: P2GZ-9F593-A
$9.58 MSRP: $14.82
You Save: $5.24 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | Active, Base, Platinum, ST-Line, ST-Line Elite, ST-Line Select | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
Ford Escape Injector Part Number: HX7Z-9F593-B
$52.77 MSRP: $83.80
You Save: $31.03 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | S, SE, SEL | 3 Cyl 1.5 L GAS
View related parts
Ford Escape Injector Part Number: YL8Z-9F593-CC
$48.84 MSRP: $80.36
You Save: $31.52 (40%)
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Replaces: YL8Z-9F593-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Escape | Limited, XLS, XLT | 6 Cyl 3.0 L GAS
View related parts
Ford Escape Injector Part Number: P2GZ-9F593-B
$60.11 MSRP: $100.91
You Save: $40.80 (41%)
ADD TO CART
Product Specifications
- Other Name: Injector Assembly
- Replaced by: P2GZ-9F593-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford Escape | Active, Base, Platinum, ST-Line, ST-Line Elite, ST-Line Select | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
Ford Escape Injector Part Number: K2GZ-9F593-A
$72.89 MSRP: $122.36
You Save: $49.47 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | SEL, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Escape Injector Part Number: HX7Z-9F593-E
$29.02 MSRP: $44.91
You Save: $15.89 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly
- Replaces: HX7Z-9F593-A, CM-5297
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | S, SE, SEL | 3 Cyl 1.5 L GAS
View related parts
Ford Escape Injector Part Number: 3M6Z-9F593-BA
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008, 2005-2006 Ford Escape | Hybrid, XLS, XLT, XLT No Boundaries | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS
View related parts
Ford Escape Injector Part Number: XS4Z-9F593-AC
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Replaces: XS4Z-9F593-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Escape | Limited, XLS, XLT | 4 Cyl 2.0 L GAS

Ford Escape Fuel Injector

OEM Fuel Injector boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Injector with long life and a perfect fit. Come to our website and find genuine Ford Escape parts. We keep a wide inventory of OEM Escape parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Escape Fuel Injector is a part that delivers fuel directly to the engine cylinders with the help of the Engine Control Module in order to mix the air and fuel. This system, called the returnless system, minimizes the amount of fuel lines since it has the regulator either on the fuel pump or in the ECM. Faulty injectors cause a drop in engine performance and power, and fuel efficiency; may harm catalytic converters and oxygen sensors. To keep cars running effectively it is wise that fuel injectors that are not working well are replaced on time. The Ford Escape Fuel Injector is very important in the development of improved performance and efficiency in a vehicle's operation by effectively controlling the fuel and electricity instead of the carburetor method.

Ford Escape Fuel Injector Parts and Q&A

Injector
4L8Z-9F593-B
Q: How to service the fuel injector and fuel rail safely and effectively on Ford Escape?
A:
Safety during fuel injector and Fuel Rail service requires that you keep all areas free of smoking and open flame due to the presence of flammable mixtures. First empty the fuel system pressure then separate the battery ground cable. Start by separating the fuel supply tube quick connect coupling from the fuel rail before detaching both the fuel rail pressure and temperature vacuum tube and electrical connector. The initial step involves disconnecting four fuel injector electrical connectors before removing the nut allowing you to place the radio capacitor to the side. You should remove the wire harness retainer from the valve cover stud bolt followed by disconnecting the two pin-type wire harness retainers which secure the fuel rail. The process of repair begins with removing two fuel rail stud bolts which enables extraction of fuel rail assembly with its injectors. The mechanic should remove and discard eight fuel injector O-ring seals. Install new O-ring seals manufactured from resistant fuel material by oiling them with engine oil before fitting them into the fuel injectors with the retaining clips. Reinstall the combination of fuel rail and injectors while securing them by tightening the two fuel rail stud bolts to 23 Nm (17 lb-ft). The pin-type retainers should be positioned onto the fuel rail and the wire harness retainer should be mounted on the valve cover stud bolt. The radio capacitor needs placement before installation of the nut followed by torque adjustment to 10 Nm (89 lb-in). Among the final tasks is to connect the fuel injector electrical connectors followed by the fuel rail pressure and temperature vacuum tube electrical connector and fuel supply tube quick connect coupling at fuel rail and battery ground cable.