How to service and repair the turbocharger inlet exhaust pipe on Ford Excursion?

Start the service or repair of the turbocharger inlet Y-pipe by taking out the turbocharger assembly together with the fuel injector control module bracket from the LH valve cover. Service of the exhaust inlet pipe requires removal of its metal gasket positioned between the exhaust inlet pipe and the EGR cooler followed by loosening the clamp and exhaust inlet pipe-to-exhaust manifold nuts on the LH and RH sides. Remove the exhaust inlet pipe assembly from the vehicle by performing it gently. Position the exhaust inlet pipe carefully with unwounded flex bellows in order to avoid distortions of the pipe when lining up with the exhaust manifolds. Start by applying anti-seize lubricant to exhaust inlet pipe bolts before installing them untightened while setting up the metal gasket on the EGR cooler and aligning the pipe with correct clamp specification. Put back the fuel injector control module bracket and turbocharger assembly where you must verify exhaust inlet pipe alignment against the turbocharger and make bracket adjustments for proper positioning when alignment is incorrect. Proper alignment of the exhaust inlet pipe with exhaust manifold requires alternate nut tightening to draw the pipe toward the manifold while maintaining equal spaces at both ends of the flange connection. The system requires one final stage where you need to check for leaks after you alternately tighten the exhaust inlet pipe-to-exhaust manifold nuts according to specifications.

OEM Ford Excursion Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Exhaust Pipes found

View related parts
Ford Excursion Front Pipe Part Number: 4C3Z-6N646-AA
$227.16 MSRP: $353.83
You Save: $126.67 (36%)
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe, Front; Exhaust Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Extension Pipe, Rear Part Number: YC3Z-5A212-BA
Product Specifications
- Other Name: Silencer Assembly; Exhaust Intermediate Pipe, Rear; Exhaust Pipe; Resonator; Tail Pipe; Muffler
- Manufacturer Note: Extension - silencer/resonator asy. - (leaded fuel only- replaces the converter - looks like a muffler)
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Resonator Part Number: YC3Z-5A212-AA
Product Specifications
- Other Name: Resonator Assembly; Muffler
- Manufacturer Note: Resonator asy. (end of tailpipe)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Excursion Muffler & Pipe, Rear Part Number: YC3Z-5230-HC
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Manufacturer Note: Muffler asy. - 2003/2004 - FROM 11/04/02
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Excursion Muffler & Pipe, Rear Part Number: YC3Z-5230-HA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Manufacturer Note: Muffler asy. - 2000/2003 - BEFORE 11/04/02
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Excursion Muffler & Pipe, Rear Part Number: YC3Z-5230-CB
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Exhaust Pipe; Muffler
- Manufacturer Note: Muffler asy.
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Excursion | Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Muffler & Pipe, Rear Part Number: YC3Z-5230-AC
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
Ford Excursion Muffler & Pipe, Rear Part Number: YC3Z-5230-AB
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Manufacturer Note: Muffler asy. - 2000/2003 - BEFORE 11/04/02
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
Ford Excursion Front Pipe Part Number: F81Z-6N646-AA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe
- Manufacturer Note: F81A-6N647-AD, With cat. converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Excursion | Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Front Pipe Part Number: F81Z-5246-DA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe, Rear; Exhaust Pipe; Tail Pipe; Extension Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Excursion | Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Muffler & Pipe, Rear Part Number: 3C7Z-5230-AB
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Exhaust Pipe; Muffler
- Manufacturer Note: Muffler & outlet pipe asy. - FROM 02/26/03
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Front Pipe Part Number: 3C3Z-6N646-AA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe, Front; Exhaust Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 8 Cyl 6.0 L DIESEL
View related parts
Ford Excursion Front Pipe Part Number: 2C3Z-5246-AA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Crossover Pipe; Exhaust Pipe; Exhaust Y Pipe
- Replaces: 1C3Z-5246-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Excursion Front Pipe Part Number: XC3Z-6N646-BA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe
- Manufacturer Note: Mounts from turbo output to exhaust system , Without cat. converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Excursion | Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL

Ford Excursion Exhaust Pipe

OEM Exhaust Pipe boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Exhaust Pipe with long life and a perfect fit. Come to our website and find genuine Ford Excursion parts. We keep a wide inventory of OEM Excursion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Exhaust Pipe is an important part that explains the solidity of the Ford Excursion, a full-size SUV that is famous for its durability and power. Particularly intended for linking various systems of them exhaust such as manifold, converter, and muffler the Exhaust Pipe allow for safely releasing poisonous gases while at the same time promoting superior vehicle performance. It fits a lot of different Ford Excursion models and even those with the more hardcore engines such as the 5.4L V8, 6.8L V10, and 7.3L Power Stroke diesel make it a popular choice among Ford Excursion owners of all types. The Exhaust Pipe is fitted with sophisticated mandrel bending that leads to proper shaping of pipes that improves the exhaust flow and consequently the efficiency and horsepower. Furthermore, H-Pipe or X-Pipe has been used for connecting crossover pipes for the optimum interaction of exhaust gases between the banks of cylinder, which provides smooth and powerful driving qualities. Durability too is important; this is evident in the Ford Excursion's design the, unique BlockerBeam, which improves crash tunnelling and the dispersion of impact forces. Such careful engineering is as much beneficial to occupants as it is the lack of possibility of collisions with other smaller vehicles. In conclusion, the Exhaust Pipe has impressed its consumers in the automotive market in terms of performance, durability, and importance in increasing efficiency and safety within the car for the Ford Excursion owners.

Ford Excursion Exhaust Pipe Parts and Q&A

Front Pipe
4C3Z-6N646-AA
Q: How to service and repair the turbocharger inlet exhaust pipe on Ford Excursion?
A:
Start the service or repair of the turbocharger inlet Y-pipe by taking out the turbocharger assembly together with the fuel injector control module bracket from the LH valve cover. Service of the exhaust inlet pipe requires removal of its metal gasket positioned between the exhaust inlet pipe and the EGR cooler followed by loosening the clamp and exhaust inlet pipe-to-Exhaust Manifold nuts on the LH and RH sides. Remove the exhaust inlet pipe assembly from the vehicle by performing it gently. Position the exhaust inlet pipe carefully with unwounded flex bellows in order to avoid distortions of the pipe when lining up with the exhaust manifolds. Start by applying anti-seize lubricant to exhaust inlet pipe bolts before installing them untightened while setting up the metal gasket on the EGR cooler and aligning the pipe with correct clamp specification. Put back the fuel injector control module bracket and turbocharger assembly where you must verify exhaust inlet pipe alignment against the turbocharger and make bracket adjustments for proper positioning when alignment is incorrect. Proper alignment of the exhaust inlet pipe with exhaust manifold requires alternate nut tightening to draw the pipe toward the manifold while maintaining equal spaces at both ends of the flange connection. The system requires one final stage where you need to check for leaks after you alternately tighten the exhaust inlet pipe-to-exhaust manifold nuts according to specifications.