How to service the front Window Motor on Ford Excursion?

The service process of the front door window motor requires first removing the window switch and both front door trim panel and watershield before starting work. Apply tape across the window when it reaches the highest point to create a secure setup. Lift away the electrical window motor connector from its position. Before unscrewing the retaining screws it is vital to provide support to the window motor. After removing all screws you should then extract the motor from its place. Follow the reverse steps applied to removal to perform installation.

OEM Ford Excursion Window Motor

Window Lift Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Window Motors found

View related parts
Ford Excursion Window Regulator, Front Driver Side Part Number: 8C3Z-2523201-C
Product Specifications
- Other Name: Regulator And Motor Assembly - Window; Front Left Power Window Motor and Regulator.; Regulator Assembly
- Position: Front Driver Side
- Replaces: 6C3Z-2523201-BC, 7C3Z-2523201-BB, 7C3Z-7823395-A, YC3Z-1523395-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 5.4L V8, 6.0L V8, 6.8L V10, 7.3L V8, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Window Regulator, Front Passenger Side Part Number: 8C3Z-2523200-C
Product Specifications
- Other Name: Regulator And Motor Assembly - Window; Front Right Power Window Motor and Regulator.; Regulator Assembly
- Position: Front Passenger Side
- Replaces: 3C3Z-2523200-BA, 6C3Z-2523200-BA, 6C3Z-2523200-BC, 7C3Z-2523200-A, YC3Z-1523394-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 5.4L V8, 6.0L V8, 6.8L V10, 7.3L V8, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

Ford Excursion Window Motor

OEM Window Motor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Window Motor with long life and a perfect fit. Come to our website and find genuine Ford Excursion parts. We keep a wide inventory of OEM Excursion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Excursion Window Motor allows raising and lowering of the side glass automatically by providing power to the window regulator when the cabin switch is pressed. This Window Motor is fitted into the door panel and is activated by the flow of electrical current through the window switch, which moves internal gearing to move the regulator arm. Frequent operation in a Ford Excursion exposes the gear set to wear, and could result in the window moving very slowly, moving in the opposite direction, or not moving at all. The glass is likely to stick when the Window Motor is no longer able to produce consistent torque, yet the switch remains on. A well-operating Ford Excursion Window Motor provides fresh air during hot days and then it closes the opening within a short time therefore preventing any rain or debris. In case of any symptoms, changing Window Motor will restore convenient one-touch comfort without any manual work. Maintaining the Ford Excursion power window system in good condition will also aid in eliminating strain on switches and other moving components.

Ford Excursion Window Motor Parts and Q&A

Window Regulator, Front Passenger Side
8C3Z-2523200-C
Q: How to service the front Window Motor on Ford Excursion?
A:
The service process of the front door window motor requires first removing the window switch and both front door trim panel and watershield before starting work. Apply tape across the window when it reaches the highest point to create a secure setup. Lift away the electrical window motor connector from its position. Before unscrewing the retaining screws it is vital to provide support to the window motor. After removing all screws you should then extract the motor from its place. Follow the reverse steps applied to removal to perform installation.