OEM Ford Expedition Brake Pedal

Ford Expedition Brake Pedal Parts Questions & Experts Answers

• Pedal Assembly
  2L7Z-2455-AA
  Q: How to service and repair the brake pedal assembly on Ford Expedition?

  A: The brake pedal assembly repair procedure starts by positioning both the accelerator pedal and the brake pedal at the same point - either at maximum forward or maximum rear location. The battery ground cable gets detached first followed by removal of the instrument panel opening cover and steering column support bracket using nut removal. Begin for brake pedal assembly repair by removing the stoplight switch self-lock pin followed by sliding the stoplight switch combined with booster push rod and bushing off the brake pedal pin. Then pull on the cable retainer to free the brake pedal-to-accelerator pedal cable from the accelerator pedal. Remove the brake pedal bracket by disconnecting the brake pedal motor electrical connector followed by removing the bulkhead sound insulator before unscrewing the brake pedal bracket nuts and bolts which allows brake pedal removal. You should begin installation by fastening first the brake pedal bracket bolts and nuts after that attach the bulkhead sound insulator and install the brake pedal motor electrical connector. The brake pedal-to-accelerator pedal cable installation requires both pedals to be at the same position while adjusting the accelerator pedal with the brake pedal motor per requirement. Position the brake pedal next to the accelerator pedal first before installing the cable under the necessary condition of new accelerator pedal installation that requires correct placement before wiring the cable. As the last step install the stoplight switch then the booster push rod and bushing onto the brake pedal pin followed by the stoplight switch self-locking pin. Reinstall the steering column support bracket before installing the instrument panel opening cover and reattaching the battery ground cable.