How to Safely Remove and Install Car Batteries on Ford Explorer?

The battery servicing process begins with battery cable disconnection and removal of the battery heat shield before removing the battery. The service requires complete removal of both bolt and battery hold-down clamp. A battery carrier or gripping opposite corners will help prevent end wall damage when lifting the battery since this prevents acid venting from vent caps that could result in injuries. People should reinstall the battery in the reverse order of removal steps. The driver must note that after disconnecting and reconnecting the battery the vehicle will experience abnormal drive behavior while it learns its adaptive strategy through driving to complete the relearning process.

How Can One Service the 4.0L SOHC Car Batteries to Avoid Personal Injury or Damage on Ford Explorer?

Caution must be exercised during service of 4.0L SOHC battery due to the risk that applying too much force on the plastic casing end walls will result in vent cap acid leakage that can cause injury along with damage. Begin by disconnecting the battery. Follow the specified order of component removal along with supporting the vehicle to access the protective cap covering the starter solenoid terminals. Complete the removals work then lower the vehicle before moving on to the harness locator. First access the battery junction box nut through its open cover after relocating the protective cover of the Generator B+ terminal. The installation procedure requires the opposite steps from removal.

OEM Ford Explorer Car Batteries

Auto Battery

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Car Batteries found

View related parts
Ford Explorer Battery Part Number: BAGM-48H6-760
$211.01 MSRP: $229.95
You Save: $18.94 (9%)
ADD TO CART
Product Specifications
- Other Name: Vehicle Battery
- Replaces: BEF-48H6-A, BHEF-48H6, BAGM-48-760, BEF-48H6
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Battery Assembly Part Number: L1MZ-10B690-D
$3120.75 MSRP: $3263.53
You Save: $142.78 (5%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Battery; Drive Motor Battery Pack Assembly
- Replaces: L1MZ-10B759-B, L1MZ-10B690-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Battery Part Number: BAGM-49H8
$261.39 MSRP: $284.95
You Save: $23.56 (9%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Vehicle Battery
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Battery, Rear Part Number: BHAGM-AUX1-A
$117.94 MSRP: $128.75
You Save: $10.81 (9%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vehicle Battery, Rear
- Position: Rear
- Replaces: BHAGM-AUX-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Limited Hybrid, Platinum Hybrid | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Battery Part Number: BXT-94RH7-730
$183.53 MSRP: $199.95
You Save: $16.42 (9%)
Product Specifications
- Other Name: Vehicle Battery
- Replaces: BXT-94-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Battery, Driver Side Part Number: BXT-65-850
$192.69 MSRP: $209.95
You Save: $17.26 (9%)
Product Specifications
- Other Name: Vehicle Battery, Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Battery Part Number: BXT-65-750
$183.53 MSRP: $199.95
You Save: $16.42 (9%)
Product Specifications
- Other Name: Vehicle Battery
- Replaces: BH-65-HH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Battery Part Number: BXT-65-650
$183.53 MSRP: $199.95
You Save: $16.42 (9%)
Product Specifications
- Other Name: Vehicle Battery
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-2019 Ford Explorer | Base, Eddie Bauer, Expedition, Limited, NBX, Platinum, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Explorer Battery Part Number: BXT-59
$183.53 MSRP: $199.95
You Save: $16.42 (9%)
Product Specifications
- Other Name: Vehicle Battery
- Replaces: BXL-59
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Battery, Front Part Number: BAGM-94RH7-800
Product Specifications
- Other Name: Vehicle Battery, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Battery Part Number: BXS-65
Product Specifications
- Other Name: Vehicle Battery
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2010 Ford Explorer | Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

Ford Explorer Car Batteries

OEM Car Batteries boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Car Batteries with long life and a perfect fit. Come to our website and find genuine Ford Explorer parts. We keep a wide inventory of OEM Explorer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Car Batteries in Ford Explorer vehicles acts as electrochemical energy storage system which provides the required electrical energy to initiate the operation of the motor and other related components such as the ignition and the fuel injection systems. It also supplies parts when the engine is off and retains driver information such as the clock and components memories for other components. Different batteries have been used in Ford Explorers over the years, they are the Conventional Flooded Lead-Acid (FLA), FLA Maintenance-Free, and Absorbed Glass Mat (AGM). However, FLA batteries for a vehicle depend on maintenance requirements, constant upkeep and come with a tendency of acid leakage while AGM batteries have such benefits as their self-sufficiency, less vulnerability of acid leakage, high performance characteristics that make them the premier in demanding circumstances. It has been established that the size and Cold Cranking Amps (CCA) ratings are some of the key parameters that need to be considered in the Car Batteries system for the premier performance particularly in harsh climates.

Ford Explorer Car Batteries Parts and Q&A

Battery
BXT-65-650
Q: How to Safely Remove and Install Car Batteries on Ford Explorer?
A:
The battery servicing process begins with Battery Cable disconnection and removal of the battery heat shield before removing the battery. The service requires complete removal of both bolt and battery hold-down clamp. A battery carrier or gripping opposite corners will help prevent end wall damage when lifting the battery since this prevents acid venting from vent caps that could result in injuries. People should reinstall the battery in the reverse order of removal steps. The driver must note that after disconnecting and reconnecting the battery the vehicle will experience abnormal drive behavior while it learns its adaptive strategy through driving to complete the relearning process.
Battery
BXS-65
Q: How Can One Service the 4.0L SOHC Car Batteries to Avoid Personal Injury or Damage on Ford Explorer?
A:
Caution must be exercised during service of 4.0L SOHC battery due to the risk that applying too much force on the plastic casing end walls will result in vent cap acid leakage that can cause injury along with damage. Begin by disconnecting the battery. Follow the specified order of component removal along with supporting the vehicle to access the protective cap covering the starter solenoid terminals. Complete the removals work then lower the vehicle before moving on to the harness locator. First access the battery junction box nut through its open cover after relocating the protective cover of the Generator B+ terminal. The installation procedure requires the opposite steps from removal.