How to service and repair the front bumper cover on Ford Explorer Sport?

Service and repair of front bumper cover begins with removing the radiator grille sight shield by unbolt its screws then freeing the retaining clips. Service the parking lamp assemblies by taking off electrical connectors while unscrewing the two bolts that exist on each side. Removing the front headlamp assemblies begins with pulling at the upward direction until all four tabs release while disconnecting their electrical connectors. The first step requires the removal of lower radiator air deflector bolts then fender splash shield screws are removed one at a time from each side with three bolts total. To extract the front bumper cover you must remove two fender-opening bolts situated on each side along with six locking tabs and unclip them before extraction. Run the opposite steps to reinstall the components.

OEM Ford Explorer Sport Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Bumpers found

View related parts
Ford Explorer Sport Impact Bar, Front
Part Number: 1L5Z-17757-KA
$348.51 MSRP: $434.60
You Save: $86.09 (20%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover Reinforcement; Bumper Impact Bar, Front; Bumper
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Explorer Sport | Base, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Face Bar, Rear
Part Number: YL2Z-17906-BAA
$92.89 MSRP: $126.41
You Save: $33.52 (27%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear; Bumper
- Position: Rear
- Replaces: F87Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Explorer Sport | Base, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Bumper Cover, Front
Part Number: 1L5Z-17D957-FAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Explorer Sport | Base, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Bumper Cover, Front
Part Number: 1L5Z-17D957-GAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Explorer Sport | Base, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Impact Bar, Front
Part Number: 1L5Z-17757-AA
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover Reinforcement; Bumper Impact Bar, Front; Bumper
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Explorer Sport | Base, XLS, XLT | 6 Cyl 4.0 L GAS

Ford Explorer Sport Bumper

Welcome to our website where you can discover high-quality, genuine Ford Explorer Sport Bumper. We offer an extensive inventory of OEM Ford Explorer Sport Bumper at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Explorer Sport Bumper Parts Questions & Experts Answers

Impact Bar, Front
1L5Z-17757-KA
Q: How to service and repair the front bumper cover on Ford Explorer Sport?
A: Service and repair of front bumper cover begins with removing the radiator grille sight shield by unbolt its screws then freeing the retaining clips. Service the parking lamp assemblies by taking off electrical connectors while unscrewing the two bolts that exist on each side. Removing the front headlamp assemblies begins with pulling at the upward direction until all four tabs release while disconnecting their electrical connectors. The first step requires the removal of lower radiator Air Deflector bolts then fender splash shield screws are removed one at a time from each side with three bolts total. To extract the front bumper cover you must remove two fender-opening bolts situated on each side along with six locking tabs and unclip them before extraction. Run the opposite steps to reinstall the components.