How to Service the Rear Brake Line Flexible Hose on Ford Explorer Sport Trac?

Initiate the servicing work on the rear brake flexible hose after you remove the wheel and tire. Start by removing the brake caliper flow bolt followed by discarding both copper washers but keep the new bolt torque at 35 Nm (26 lb-ft) when reinstalling it. When replacing the brake tube fitting to the brake flexible hose users should tighten it to 18 Nm (13 lb-ft). The removal process of the brake flexible hose bracket bolt releases the brake hose for detachment but the installation requires a 20 Nm (15 lb-ft) torque setting on the bracket bolt. Perform the reverse steps after removing the brake caliper and follow the correct bleeding procedure. The brake system requires new fluid which should come from an unopened source since using drained fluid can lead to both system contamination and potential damages. Brake fluid poses risks to painted and plastic surfaces thus any fluid leakages require immediate water washing. The USA or Canadian callers should reach emergency medical information for Ford/Motorcraft products at 1-800-959-3673 while consulting the MSDS document available for the product.

How to Service and Repair the Front Brake Line Flexible Hose on Ford Explorer Sport Trac?

The service and repair of the front brake flexible hose begins with using brake fluid which meets manufacturer specs along with strict avoidance of previous drained fluid to protect system integrity. Special attention must be given to reading product label cautions since emergency medical assistance can be obtained through Ford/Motorcraft products contact at 1-800-959-3673 for USA and Canada locations. Brake fluid damage paints and plastics so any contact must be washed away swiftly with water. Begin work by uninstalling the brake flexible hose flow bolt while discarding its two copper washers and tighten new washers before attaching the bolt to 35 Nm (26 lb-ft). The brake tube fitting must be disconnected from the brake flexible hose yet you need to tighten it to 18 Nm (13 lb-ft) during reinstallation. First disconnect the retaining clip that holds the brake flexible hose and proceed to remove the hose itself. The final steps for installation include performing the removal process in reverse direction while carrying out a brake system bleeding process to check proper brake function.

OEM Ford Explorer Sport Trac Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Brake Lines found

View related parts
Ford Explorer Sport Trac Flex Hose, Front Passenger Side Part Number: 8L5Z-2078-R
$30.24 MSRP: $49.09
You Save: $18.85 (39%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Front Flex Hose; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 7L5Z-2078-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Flex Hose, Front Driver Side Part Number: 8L5Z-2078-L
$30.23 MSRP: $48.00
You Save: $17.77 (38%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Front Flex Hose; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 7L5Z-2078-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Flex Hose, Front Passenger Side Part Number: 6L2Z-2078-D
$31.59 MSRP: $42.99
You Save: $11.40 (27%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Flex Hose, Front Driver Side Part Number: 6L2Z-2078-C
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Flex Hose, Rear Driver Side Part Number: 6L2Z-2282-B
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Replaces: 6L2Z-2282-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Flex Hose, Rear Passenger Side Part Number: 6L2Z-2282-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Replaces: 6L2Z-2282-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Flex Hose, Rear Passenger Side Part Number: XL2Z-2282-AA
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Manufacturer Note: RH, Postal vehicle
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Explorer Sport Trac | Adrenalin, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Flex Hose, Rear Driver Side Part Number: 3L2Z-2282-CA
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Explorer Sport Trac | Adrenalin, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Flex Hose, Rear Center Passenger Side Part Number: 1L5Z-2282-BA
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear, Rear Center; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Center Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Ford Explorer Sport Trac | Base, XL | 6 Cyl 4.0 L GAS

Ford Explorer Sport Trac Brake Line

OEM Brake Line boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Line with long life and a perfect fit. Come to our website and find genuine Ford Explorer Sport Trac parts. We keep a wide inventory of OEM Explorer Sport Trac parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Brake Line in the Ford Explorer Sport Trac start from master cylinder to brake caliper pistons through which the brake fluid is transported in order to Hydraulic Brake System. The metallic brake lines are prone to corrosion and also impact, which will result to the formation of leaks, thus loss of pressure in the system. Brake hoses are also physical as well as internal degraded and this hampers the brake action or resulting in a complete failure. In the case of replacement but before this, pre-bent brake line kits as well as low corrosion stainless steel brake hoses can be procured for quicker application. Replacing the rubber hoses with braided stainless steel ones offers a firmer and more sensitive feel of the brake pedal which is desirable in conditions where high velocities are to be maintained.

Ford Explorer Sport Trac Brake Line Parts and Q&A

Flex Hose, Rear Driver Side
6L2Z-2282-B
Q: How to Service the Rear Brake Line Flexible Hose on Ford Explorer Sport Trac?
A:
Initiate the servicing work on the rear brake flexible hose after you remove the wheel and tire. Start by removing the brake caliper flow bolt followed by discarding both copper washers but keep the new bolt torque at 35 Nm (26 lb-ft) when reinstalling it. When replacing the brake tube fitting to the brake flexible hose users should tighten it to 18 Nm (13 lb-ft). The removal process of the brake flexible hose bracket bolt releases the brake hose for detachment but the installation requires a 20 Nm (15 lb-ft) torque setting on the bracket bolt. Perform the reverse steps after removing the brake caliper and follow the correct bleeding procedure. The brake system requires new fluid which should come from an unopened source since using drained fluid can lead to both system contamination and potential damages. Brake fluid poses risks to painted and plastic surfaces thus any fluid leakages require immediate water washing. The USA or Canadian callers should reach emergency medical information for Ford/Motorcraft products at 1-800-959-3673 while consulting the MSDS document available for the product.
Flex Hose, Front Driver Side
6L2Z-2078-C
Q: How to Service and Repair the Front Brake Line Flexible Hose on Ford Explorer Sport Trac?
A:
The service and repair of the front brake flexible hose begins with using brake fluid which meets manufacturer specs along with strict avoidance of previous drained fluid to protect system integrity. Special attention must be given to reading product label cautions since emergency medical assistance can be obtained through Ford/Motorcraft products contact at 1-800-959-3673 for USA and Canada locations. Brake fluid damage paints and plastics so any contact must be washed away swiftly with water. Begin work by uninstalling the brake flexible hose flow bolt while discarding its two copper washers and tighten new washers before attaching the bolt to 35 Nm (26 lb-ft). The brake tube fitting must be disconnected from the brake flexible hose yet you need to tighten it to 18 Nm (13 lb-ft) during reinstallation. First disconnect the retaining clip that holds the brake flexible hose and proceed to remove the hose itself. The final steps for installation include performing the removal process in reverse direction while carrying out a brake system bleeding process to check proper brake function.