How to service and repair the traction bar and ball joint on all on Ford F-250 Super Duty?

The procedure for tracking bar and ball joint service begins with parking the vehicle on a hoist in NEUTRAL position. Begin by taking off the track bar along with any present ball joint grease fittings before removing the ball joint boot. The technician should discard both the shock absorber lower bolt and flagnut. The procedure for early build vehicles requires disposal of the stabilizer bar link lower bolt while late build vehicles need disposal of the stabilizer bar link upper nut. Place an appropriate socket onto the C-frame screw with the help of a jackstand lowered under the front axle to execute ball joint removal involving the C-Frame and Screw Installer/Remover and Ball Joint Remover/Installer tool set. The installation of the new ball joint requires its placement in the bracket where removal of the grease fitting should occur prior to assembling to avoid damage. You should install the ball joint while keeping the dust boot in place but avoiding any damage to it. Reinstall the grease fitting immediately if you removed it from the ball joint. Support the front axle on the jackstand then install new shock absorber lower bolts and flagnuts by applying torque to 150 Nm (111 lb-ft). The stabilizer bar link lower bolt installation requires a new one on early vehicles to meet 150 Nm (111 lb-ft) torque while late vehicles need a new upper nut with a torque specification of 80 Nm (59 lb-ft). Finally, reinstall the track bar. All suspension fasteners require replacement with identical components by part number or equivalent alternatives while sticking to the torque specifications for reassembly to preserve suspension system integrity.

OEM Ford F-250 Super Duty Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Ball Joints found

View related parts
Ford F-250 Super Duty Ball Joints, Front Lower
Part Number: HC3Z-3050-A
$73.85 MSRP: $117.27
You Save: $43.42 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint, Front Lower; Lower Ball Joint; Suspension Ball Joint; Ball Joint
- Manufacturer Note: RH/LH
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Ball Joint, Front Upper
Part Number: 4C3Z-3049-DB
$57.35 MSRP: $94.36
You Save: $37.01 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint, Front Upper; Suspension Ball Joint; Upper Ball Joint; Upper Ball Joints
- Position: Front Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2006 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Ball Joints, Lower
Part Number: BC3Z-3050-C
$50.94 MSRP: $82.18
You Save: $31.24 (39%)
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint; Ball Joint; Lower Ball Joint; Track Bar Joint; Joint
- Manufacturer Note: Track Bar Ball Joint
- Position: Lower
- Replaces: 8C3Z-3050-F, MCSOE-51, 5C3Z-3050-CA, 8C3Z-3050-C, MCSOE-89
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2017 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Upper Ball Joints, Front
Part Number: 5C2Z-3049-AA
$48.57 MSRP: $69.48
You Save: $20.91 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint, Front Upper; Suspension Ball Joint; Ball Joint
- Position: Front Upper
- Replaces: F5UZ-3049-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford F-250 Super Duty | King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford F-250 Super Duty Ball Joints, Front Upper
Part Number: 8C3Z-3049-B
$45.34 MSRP: $72.00
You Save: $26.66 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint, Front Upper; Upper Ball Joint; Upper Ball Joints; Suspension Ball Joint; Ball Joint
- Position: Front Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2022 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Ball Joints, Front Lower
Part Number: 8C3Z-3050-D
$77.54 MSRP: $125.09
You Save: $47.55 (39%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint, Front Lower; Lower Ball Joint; Suspension Ball Joint; Ball Joint
- Manufacturer Note: RH/LH
- Position: Front Lower
- Replaces: F6TZ-3050-FB, 5C3Z-3050-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2022 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Ball Joints, Front Upper
Part Number: HC3Z-3049-A
$52.78 MSRP: $83.82
You Save: $31.04 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint, Front Upper; Upper Ball Joint; Upper Ball Joints; Suspension Ball Joint; Ball Joint
- Manufacturer Note: RH/LH
- Position: Front Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Lower Ball Joint, Front
Part Number: BC3Z-3050-D
$61.55 MSRP: $101.27
You Save: $39.72 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint, Front Lower; Suspension Ball Joint; Ball Joint
- Position: Front Lower
- Replaces: 5C3Z-3050-BB, MCSOE-22, MCF-7, BC3Z-3050-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Ball Joints, Front Lower
Part Number: BC3Z-3050-B
$69.28 MSRP: $114.00
You Save: $44.72 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint, Front Lower; Lower Ball Joint; Suspension Ball Joint; Ball Joint
- Manufacturer Note: RH/LH
- Position: Front Lower
- Replaces: 5C3Z-3050-AB, MCSOE-2
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2022, 1999-2004 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Ball Joints, Front Upper
Part Number: BC3Z-3049-B
$56.13 MSRP: $92.36
You Save: $36.23 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Suspension Ball Joint, Front Upper; Upper Ball Joint; Upper Ball Joints; Suspension Ball Joint; Ball Joint
- Manufacturer Note: RH/LH
- Position: Front Upper
- Replaces: 5C2Z-3049-BA, 5C3Z-3049-AB, 8C3Z-3049-A, MCSOE-67, YC2Z-3049-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2022, 2008-2009 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Lower Ball Joint
Part Number: PC3Z-3050-A
$74.94 MSRP: $119.00
You Save: $44.06 (38%)
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Upper Ball Joint
Part Number: PC3Z-3049-B
$69.02 MSRP: $100.47
You Save: $31.45 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Upper Ball Joints
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | XL | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Upper Ball Joint
Part Number: PC3Z-3049-A
$59.44 MSRP: $99.60
You Save: $40.16 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Upper Ball Joints
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS

Ford F-250 Super Duty Ball Joint

Welcome to our website where you can discover high-quality, genuine Ford F-250 Super Duty Ball Joint. We offer an extensive inventory of OEM Ford F-250 Super Duty Ball Joint at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford F-250 Super Duty Ball Joint Parts Questions & Experts Answers

Ball Joints, Front Upper
8C3Z-3049-B
Q: How to service and repair the traction bar and ball joint on all on Ford F-250 Super Duty?
A: The procedure for tracking bar and ball joint service begins with parking the vehicle on a hoist in NEUTRAL position. Begin by taking off the track bar along with any present ball joint grease fittings before removing the ball joint boot. The technician should discard both the shock absorber lower bolt and flagnut. The procedure for early build vehicles requires disposal of the stabilizer bar link lower bolt while late build vehicles need disposal of the stabilizer bar link upper nut. Place an appropriate socket onto the C-frame screw with the help of a jackstand lowered under the front axle to execute ball joint removal involving the C-Frame and Screw Installer/Remover and Ball Joint Remover/Installer tool set. The installation of the new ball joint requires its placement in the bracket where removal of the grease fitting should occur prior to assembling to avoid damage. You should install the ball joint while keeping the dust boot in place but avoiding any damage to it. Reinstall the grease fitting immediately if you removed it from the ball joint. Support the front axle on the jackstand then install new shock absorber lower bolts and flagnuts by applying torque to 150 Nm (111 lb-ft). The stabilizer bar link lower bolt installation requires a new one on early vehicles to meet 150 Nm (111 lb-ft) torque while late vehicles need a new upper nut with a torque specification of 80 Nm (59 lb-ft). Finally, reinstall the track bar. All suspension fasteners require replacement with identical components by part number or equivalent alternatives while sticking to the torque specifications for reassembly to preserve suspension system integrity.