How to service and repair the catalytic converter on gasoline engines on Ford F-250 Super Duty?

The procedure to service and repair a gasoline engine catalytic converter requires first placing the vehicle in neutral position then hoisting it for work. Crush the skid plate only if present. Dispose of both the 4 Y-pipe exhaust flange nuts in addition to the gasket. The coupling between the catalytic converter and muffler needs to be loosened. Also disconnect the exhaust intermediate pipe from its isolator if it has one and the front muffler isolator if it exists. Remove the catalytic converter while unwiring its rubber isolator. Any installation of a new catalytic converter requires complete removal of catalyst monitor sensors. Apply anti-seize compound on the catalyst monitor sensor threads before installing it and torque it to 46 Nm (34 ft. lbs.). After cleaning the gasket area between the exhaust Y-pipe flange and the catalytic converter flange position the converter then restore the rubber isolator to its original position. Use the front muffler isolator to connect the exhaust intermediate pipe in case the application requirements allow for it. New exhaust Y-pipe flange gaskets should be installed before the new exhaust Y-pipe flange nuts get loosely fitted. The pipe coupling requires cleaning from any rust at its surface area before installing the new coupling at the joint between the catalytic converter and muffler or the joint between the catalytic converter and exhaust intermediate pipe with a 4 mm (0.15 inch) maximum tolerance from the button end. The exhaust system needs alignment before tightening the exhaust Y-pipe flange nuts to 40 Nm (30 ft. lbs.), then move to tighten either the catalytic converter-to-muffler coupling or catalytic converter-to-exhaust intermediate pipe coupling to 55 Nm (41 ft. lbs.). Install the skid plate when it comes with the system.

OEM Ford F-250 Super Duty Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

48 Catalytic Converters found

View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: CC3Z-5H270-A
$5805.45 MSRP: $7358.67
You Save: $1553.22 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter Assembly - Diesel Particle
- Replaces: BC3Z-5H270-C, BC3Z-5H270-A, BC3Z-5H270-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford F-250 Super Duty | King Ranch, Lariat, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: 9C3Z-5H267-B
$1085.70 MSRP: $1462.86
You Save: $377.16 (26%)
ADD TO CART
Product Specifications
- Other Name: Catalyst Assembly
- Replaces: 7C3Z-5H267-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: HC3Z-5H270-C
$6364.68 MSRP: $6391.73
You Save: $27.05 (1%)
ADD TO CART
Product Specifications
- Other Name: Filter Assembly - Diesel Particle; Diesel Particulate Filter
- Replaces: HC3Z-5H270-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: 9C3Z-5F250-E
$2214.81 MSRP: $2375.71
You Save: $160.90 (7%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Replaces: 9C3Z-5F250-D, 9C3Z-5F250-A, 9C3Z-5F250-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: DC3Z-5H270-C
$6773.44 MSRP: $8015.33
You Save: $1241.89 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter Assembly - Diesel Particle
- Replaces: DC3Z-5H270-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: PC3Z-5F250-F
$3000.30 MSRP: $3796.57
You Save: $796.27 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | XL | 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: FC3Z-5H270-C
$4791.15 MSRP: $6070.67
You Save: $1279.52 (22%)
ADD TO CART
Product Specifications
- Other Name: Filter Assembly - Diesel Particle
- Replaces: FC3Z-5H270-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2016 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: PC3Z-5F250-B
$3516.00 MSRP: $4451.43
You Save: $935.43 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: KC3Z-5F250-A
$2763.94 MSRP: $3496.43
You Save: $732.49 (21%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: LC3Z-5F250-D
$2556.04 MSRP: $3232.43
You Save: $676.39 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: LC3Z-5H270-F
$3759.00 MSRP: $4442.67
You Save: $683.67 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter Assembly - Diesel Particle; Diesel Particulate Filter
- Replaces: LC3Z-5H270-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: 8C3Z-5F250-K
$2000.25 MSRP: $2707.14
You Save: $706.89 (27%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Replaces: 8C3Z-5F250-H, 8C3Z-5F250-D, 8C3Z-5F250-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: 8C3Z-5F250-J
$2221.43 MSRP: $2382.86
You Save: $161.43 (7%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Replaces: 8C3Z-5F250-C, 8C3Z-5F250-A, 8C3Z-5F250-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: PC3Z-5E212-A
$3528.71 MSRP: $4467.57
You Save: $938.86 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: PC3Z-5H270-D
$2179.50 MSRP: $2570.67
You Save: $391.17 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter Assembly - Diesel Particle; Diesel Particulate Filter
- Replaced by: PC3Z-5H270-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: 5C3Z-5F250-A
Product Specifications
- Other Name: Converter Assembly; Front Pipe
- Manufacturer Note: SUN
- Replaces: 5C3Z-5F250-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford F-250 Super Duty | King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: 1C3Z-5E212-AA
Product Specifications
- Other Name: Converter Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: 1C3Z-5E212-CA
Product Specifications
- Other Name: Converter Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford F-250 Super Duty Catalytic Converter Part Number: 2C3Z-5E212-AA
Product Specifications
- Other Name: Converter Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford F-250 Super Duty | Lariat, XL, XLT
View related parts
Ford F-250 Super Duty Converter Part Number: 2C3Z-5E212-BA
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter
- Manufacturer Note: Converter - California - Narrow Frame WB (Straight over Axle) (catchword VOO) - 2002
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2003 Ford F-250 Super Duty | Lariat, XL, XLT

| Page 1 of 3 |Next >

1-20 of 48 Results

Ford F-250 Super Duty Catalytic Converter

OEM Catalytic Converter boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Catalytic Converter with long life and a perfect fit. Come to our website and find genuine Ford F-250 Super Duty parts. We keep a wide inventory of OEM F-250 Super Duty parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford F-250 Super Duty Catalytic Converter is an exhaust and emission system that comprises part of the engine recognized for durability and functionality. Working to transform toxic gases including; CO, HC and NOx into less toxic gases, this catalytic converter is one of the most vital in boosting efficiency and safety. The catalytic converters are designed to meet standards of different Ford F-250 super duty models of the regular cab, super cab and the crew cab ensuring the vehicles met all the set environmental standards and in the sameRIENDS: HUGE EVENT! INDEX register the optimal engine performance. The honeycomb substrate is more advanced compared to the regular ones; the material used has precious metals such as platinum, palladium, and rhodium to enhance the chemical processes in the Ford F-250 Super Duty Catalytic Converter and set it apart in the automotive market. For instance, the F-250 Super Duty's catalytic converter is built to be robust, from challenges like overheating and clogging that may hinder its performance. Ford F-250 Super Duty's Catalytic Converter is still advancing with the innovations of enhanced coatings for corrosion for the later models of the pick-up truck. This dedication to the high standard of quality leads to not only the improvement of the vehicle's capabilities but also the given environment, making the Ford F-250 Super Duty one of the best options for those deciding on a truck that would not only be powerful and loyal but also legal.

Ford F-250 Super Duty Catalytic Converter Parts and Q&A

Catalytic Converter
5C3Z-5F250-A
Q: How to service and repair the catalytic converter on gasoline engines on Ford F-250 Super Duty?
A:
The procedure to service and repair a gasoline engine catalytic converter requires first placing the vehicle in neutral position then hoisting it for work. Crush the skid plate only if present. Dispose of both the 4 Y-pipe exhaust flange nuts in addition to the gasket. The coupling between the catalytic converter and Muffler needs to be loosened. Also disconnect the exhaust intermediate pipe from its isolator if it has one and the front muffler isolator if it exists. Remove the catalytic converter while unwiring its rubber isolator. Any installation of a new catalytic converter requires complete removal of catalyst monitor sensors. Apply anti-seize compound on the catalyst monitor sensor threads before installing it and torque it to 46 Nm (34 ft. lbs.). After cleaning the gasket area between the exhaust Y-pipe flange and the catalytic converter flange position the converter then restore the rubber isolator to its original position. Use the front muffler isolator to connect the exhaust intermediate pipe in case the application requirements allow for it. New exhaust Y-pipe flange gaskets should be installed before the new exhaust Y-pipe flange nuts get loosely fitted. The pipe coupling requires cleaning from any rust at its surface area before installing the new coupling at the joint between the catalytic converter and muffler or the joint between the catalytic converter and exhaust intermediate pipe with a 4 mm (0.15 inch) maximum tolerance from the button end. The exhaust system needs alignment before tightening the exhaust Y-pipe flange nuts to 40 Nm (30 ft. lbs.), then move to tighten either the catalytic converter-to-muffler coupling or catalytic converter-to-exhaust intermediate pipe coupling to 55 Nm (41 ft. lbs.). Install the skid plate when it comes with the system.