How to repair a front bumper cover on Ford F-350 Super Duty?

First review the front bumper cover to establish whether repairs can achieve quality and fit standards together with durable performance before evaluating cost-effectiveness with new bumper acquisition. Start by detaching the affected bumper from its position after cleaning the damaged tab sections with a combination of a plastic-wax and grease remover solution. Apply 80-grit hand-sanding to the repair zone followed by compressed air usage to eliminate any remaining debris. Cit the label to find the right directions for applying a plastics adhesion promoter. Cut a piece of fiberglass cloth matching the front tab while extending in a wedge shape that measures approximately 51 mm (2 in) behind the original tab position. Follow manufacturer instructions to prepare repair adhesive cloth to be applied on the affected area where the plastic repair material should replicate the tab shape. Follow manufacturer directions for the cure duration and then form the repair tab using an angled sander without allowing the exterior surface to become exposed. You must perform needed paint repairs using Ford-approved paint systems before reinstalling the bumper cover.

How to repair a damaged rear bumper cover on Ford F-350 Super Duty?

The inspection process enables you to determine whether repairs on a damaged rear bumper cover are justified by its ability to reach an acceptable state of quality while comparing the expenses to those of a new bumper replacement. The affected bumper needs removal so technicians can cleanse the broken tab(s) by using a plastics wax and grease remover. The repair area must receive hand sanding with 80-grit paper followed by compressed air usage for debris removal. please use plastics adhesion promoter in accordance with the product label instructions. Obtain a piece of fiberglass cloth or equivalent material that will completely cover the tab's front portion and extend in a sloped 51 mm (2 in) wedge starting from the original tab position. Before adding the affected area apply the pre-prepared repair adhesive cloth patch by placing the plastic repair material patch to create the tab shape right away. A small angle sander should be used after the appropriate cure time to shape the repair tab. The sander operation must stop before the exterior surface is reached. To finish the procedure you must repair paint damage on the bumper cover while utilizing Ford-approved paint systems before reinstalling the bumper cover system.

OEM Ford F-350 Super Duty Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

43 Bumpers found

View related parts
Ford F-350 Super Duty Bumper, Front Part Number: 8C3Z-17757-CPTM
$509.07 MSRP: $747.53
You Save: $238.46 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
Ford F-350 Super Duty Bumper, Rear Part Number: 9C3Z-17906-APTM
$660.79 MSRP: $978.95
You Save: $318.16 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: 8C3Z-17906-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2016 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Bumper Part Number: PC3Z-17810-JA
$289.89 MSRP: $425.68
You Save: $135.79 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension - Bumper Bar - Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: PC3Z-17757-GA
$1260.30 MSRP: $1867.12
You Save: $606.82 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: PC3Z-17757-EA
$967.44 MSRP: $1433.25
You Save: $465.81 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: LC3Z-17757-FAPTM
$773.82 MSRP: $1146.40
You Save: $372.58 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: HC3Z-17757-CB
$851.28 MSRP: $1261.15
You Save: $409.87 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: PC3Z-17757-LAPTM
$805.17 MSRP: $1192.85
You Save: $387.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: LC3Z-17757-A
$764.61 MSRP: $1132.75
You Save: $368.14 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: PC3Z-17757-PAPTM
$805.17 MSRP: $1192.85
You Save: $387.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: PC3Z-17757-CA
$997.71 MSRP: $1478.08
You Save: $480.37 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: PC3Z-17757-AAPTM
$805.17 MSRP: $1192.85
You Save: $387.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: LC3Z-17757-AA
$858.09 MSRP: $1271.25
You Save: $413.16 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: LC3Z-17757-B
$728.45 MSRP: $1079.18
You Save: $350.73 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper, Rear Part Number: 9C3Z-17906-B
$788.41 MSRP: $1251.45
You Save: $463.04 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: 8C3Z-17906-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2016 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: LC3Z-17757-C
$769.92 MSRP: $1140.62
You Save: $370.70 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper, Front Part Number: LC3Z-17757-HAPTM
$693.03 MSRP: $1026.72
You Save: $333.69 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper Part Number: PC3Z-17810-KAPTM
$269.59 MSRP: $395.87
You Save: $126.28 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension - Bumper Bar - Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Bumper Part Number: PC3Z-17810-MAPTM
$252.45 MSRP: $370.70
You Save: $118.25 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension - Bumper Bar - Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Upper Cover, Black Part Number: 6C3Z-17D957-AA
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL

| Page 1 of 3 |Next >

1-20 of 43 Results

Ford F-350 Super Duty Bumper

OEM Bumper boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper with long life and a perfect fit. Come to our website and find genuine Ford F-350 Super Duty parts. We keep a wide inventory of OEM F-350 Super Duty parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

People acknowledge the Ford F-350 Super Duty Bumper because it combines dependable operation with exceptional performance to guarantee vehicle safety and efficiency. During low-speed crashes the bumper operates by spreading crash energy to guard the body of the Ford F-350 Super Duty and its essential safety components. This bumper serves multiple F-350 Super Duty vehicles and integrates modern engineering which transitions from simple metal beams to complex structures containing aluminum, carbon steel and stainless steel components with different benefits. A rust-proof aluminum structure forms the roof of the bumper system yet carbon steel strengthens all points while stainless steel unites high durability with protection against corrosion. This bumper improves F-350 Super Duty appearance along with its strong architectural framework to guarantee safety remains the main advantage beside functionality. Improved towing options and advanced safety technologies like antilock brakes and trailer sway control make the Ford F-350 Super Duty stand out to customers in automotive markets. The bumper achieves two vital tasks for preserving truck performance and reliability which establishes it as the superior option for buyers seeking dependable work and leisure vehicles. This Bumper represents Ford's dedication to creating high-quality innovative products which solidify their establishment as a premium segment leader.

Ford F-350 Super Duty Bumper Parts and Q&A

Bumper, Front
8C3Z-17757-CPTM
Q: How to repair a front bumper cover on Ford F-350 Super Duty?
A:
First review the front bumper cover to establish whether repairs can achieve quality and fit standards together with durable performance before evaluating cost-effectiveness with new bumper acquisition. Start by detaching the affected bumper from its position after cleaning the damaged tab sections with a combination of a plastic-wax and grease remover solution. Apply 80-grit hand-sanding to the repair zone followed by compressed air usage to eliminate any remaining debris. Cit the label to find the right directions for applying a plastics adhesion promoter. Cut a piece of fiberglass cloth matching the front tab while extending in a wedge shape that measures approximately 51 mm (2 in) behind the original tab position. Follow manufacturer instructions to prepare repair adhesive cloth to be applied on the affected area where the plastic repair material should replicate the tab shape. Follow manufacturer directions for the cure duration and then form the repair tab using an angled sander without allowing the exterior surface to become exposed. You must perform needed paint repairs using Ford-approved paint systems before reinstalling the bumper cover.
Bumper, Rear
9C3Z-17906-D
Q: How to repair a damaged rear bumper cover on Ford F-350 Super Duty?
A:
The inspection process enables you to determine whether repairs on a damaged rear bumper cover are justified by its ability to reach an acceptable state of quality while comparing the expenses to those of a new bumper replacement. The affected bumper needs removal so technicians can cleanse the broken tab(s) by using a plastics wax and grease remover. The repair area must receive hand sanding with 80-grit paper followed by compressed air usage for debris removal. please use plastics adhesion promoter in accordance with the product label instructions. Obtain a piece of fiberglass cloth or equivalent material that will completely cover the tab's front portion and extend in a sloped 51 mm (2 in) wedge starting from the original tab position. Before adding the affected area apply the pre-prepared repair adhesive cloth patch by placing the plastic repair material patch to create the tab shape right away. A small angle sander should be used after the appropriate cure time to shape the repair tab. The sander operation must stop before the exterior surface is reached. To finish the procedure you must repair paint damage on the bumper cover while utilizing Ford-approved paint systems before reinstalling the bumper cover system.