Other Name: Pipe - Exhaust Front; Exhaust Pipe; Pipe - Exhaust - Front
Position: Front
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2005-2007 Ford F-350 Super Duty | King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
| Page 1 of 7 |Next >
1-20 of 140 Results
Ford F-350 Super Duty Exhaust Pipe
Welcome to our website where you can discover high-quality, genuine Ford F-350 Super Duty Exhaust Pipe. We offer an extensive inventory of OEM Ford F-350 Super Duty Exhaust Pipe at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford F-350 Super Duty Exhaust Pipe Parts Questions & Experts Answers
Q: How to Service and Repair an Intermediate Exhaust Pipe on Gasoline Engines on Ford F-350 Super Duty?
A: Start by positioning the vehicle in NEUTRAL gear and hoisting it before working on the exhaust intermediate pipe of gasoline engines. You should replace all fasteners with new ones that carry the same part number as the original parts because exhaust fasteners utilize torque prevailing design principles while reassembly should follow specified torque values for exhaust component retention. Start the repair process by untightening the Torca(R) clamp that connects the exhaust intermediate pipe to the Catalytic Converter or the catalytic converter delete pipe before moving to unfasten the Torca(R) clamp connecting the intermediate pipe to the Muffler. Remove the exhaust intermediate pipe from the isolator while disconnecting it from both the front muffler isolator and the assembly pipe before continuing. To install the exhaust intermediate pipe users should place it into the muffler while also connecting it to the catalytic converter or delete pipe. They should then reattach any isolators that are present before tightening the front muffler isolator. After positioning the button on the catalytic converter or delete pipe correctly into the slot on the exhaust intermediate pipe proceed to tighten the Torca(R) clamp to 55 Nm (41 lb-ft). Safely insert the button of the exhaust intermediate pipe into the slot on the muffler and tailpipe before tightening the Torca(R) clamp to 55 Nm (41 lb-ft). The exhaust system alignment procedure should be performed when exhaust system isolators show any load other than zero.