Other Name: Glass - Sliding; Window Regulator, Rear Center; Back Glass
Position: Rear Center
Replaced by: HC3Z-2542006-F
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2017-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
Other Name: Remanufactured Motor Assembly - Window Operating; Power Window Motor; Motor Assembly - Window Operating
Manufacturer Note: R.H., Front Door, with integrated connector at motor, Reman Motor, FROM 08/04/98
Position: Passenger Side
Replaces: F81Z-1523394-AA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1999 Ford F-350 Super Duty | Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
| Page 1 of 2 |Next >
1-20 of 37 Results
Ford F-350 Super Duty Power Window Motor
Welcome to our website where you can discover high-quality, genuine Ford F-350 Super Duty Power Window Motor. We offer an extensive inventory of OEM Ford F-350 Super Duty Power Window Motor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford F-350 Super Duty Power Window Motor Parts and Q&A
Q: How to service the rear door Power Window Motor on Ford F-350 Super Duty?
A: The rear door trim panel, watershield, and speakers have to be taken off to service the rear door window motor. Cover the window glass with tape, dismount the electric drive and lift off bolts (tighten to 13 Nm when putting them back in). Install the regulator and the electric drive separately, and the reverse.
Q: How to service the front Power Window Motor on Ford F-350 Super Duty?
A: Removing the Window Regulator and motor assembly to service the motor preparing the front door window, make sure the window is completely up before incurring an injury. Unscrew the motor bolts and screwdriver out the motor, and screw in the new motor, tightening the bolts. Installation is done by reversing the process.