How to service the front ABS sensor on Ford Flex?

Service of the front ABS sensor requires first removing the wheel together with the tire. The first step in servicing involves disconnecting the electrical connector that belongs to the ABS sensor. The two scrivets must be removed before you can position the fender splash shield aside. Then disconnect the ABS sensor harness from its pin-type retainer and both ABS sensor harness retainers. You need to remove the bolt that locks the ABS sensor in place before pulling out the sensor from its position. When installing the ABS sensor, tighten the bolt to 15 Nm (133 lb-in) following all the uninstallation steps in reverse order.

OEM Ford Flex ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 ABS Sensors found

View related parts
Ford Flex ABS Sensor, Front
Part Number: DA8Z-2C204-C
$39.94 MSRP: $63.42
You Save: $23.48 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front; Front Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: RH/LH
- Position: Front
- Replaces: DA8Z-2C204-B, BRAB-370, DA8Z-2C204-A, BRAB-353
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex ABS Sensor, Rear
Part Number: AE9Z-2C190-B
$22.89 MSRP: $36.35
You Save: $13.46 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear; Rear Speed Sensor; ABS Wheel Speed Sensor
- Position: Rear
- Replaces: AE9Z-2C190-A, BRAB-277
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex ABS Sensor, Front Driver Side
Part Number: 8G1Z-2C204-A
$51.02 MSRP: $85.49
You Save: $34.47 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front, Front Left, Front Right; ABS Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: RH/LH
- Position: Front Driver Side
- Replaces: 7F9Z-2C204-A, 5F9Z-2C204-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex ABS Sensor, Front
Part Number: AE9Z-2C204-A
$64.59 MSRP: $106.27
You Save: $41.68 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front; Front Speed Sensor
- Manufacturer Note: RH/LH
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex ABS Sensor, Rear
Part Number: 8A8Z-2C190-A
$71.69 MSRP: $120.36
You Save: $48.67 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear; ABS Speed Sensor; Rear Speed Sensor; ABS Wheel Speed Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS

Ford Flex ABS Sensor

Welcome to our website where you can discover high-quality, genuine Ford Flex ABS Sensor. We offer an extensive inventory of OEM Ford Flex ABS Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Flex ABS Sensor Parts Questions & Experts Answers

ABS Sensor, Front Driver Side
8G1Z-2C204-A
Q: How to service the front ABS sensor on Ford Flex?
A: Service of the front ABS sensor requires first removing the wheel together with the tire. The first step in servicing involves disconnecting the electrical connector that belongs to the ABS sensor. The two scrivets must be removed before you can position the fender splash shield aside. Then disconnect the ABS sensor harness from its pin-type retainer and both ABS sensor harness retainers. You need to remove the bolt that locks the ABS sensor in place before pulling out the sensor from its position. When installing the ABS sensor, tighten the bolt to 15 Nm (133 lb-in) following all the uninstallation steps in reverse order.