How should one safely service the fuel level sensor on Ford Flex?

The fuel level service requires safety precautions to keep away smoking or carrying lighted tobacco products or open flame sources from fuel-related components because dangerous fuel mixtures exist. Users must prevent the use of personal electronic devices in areas surrounding fuel components. The procedure to work on fuel tubes and system components requires relieving fuel system pressure first to avoid accidents and professionals should always disconnect the battery ground cable during evaporative emission system or fuel-related component maintenance. A serviceable fuel level sender exists within the fuel level sensor device. The starting point should consist of releasing fuel system pressure followed by disconnection of the battery ground cable. Open the fuel pump module access cover while you inspect and clean all module connections with no debris present inside the surrounding area. Use absorbent towelling around the working area before disconnecting the fuel pump module electrical connector. Route the fuel tank jumper tube to a fuel storage tanker which should drain about one-fourth of the fuel until the sensor mounting flange becomes exposed in the lowered fuel level. Access the sensor cover of the fuel level and cleanse its connections before disconnecting its electrical wires. Cut the connections of the fuel vapor tube assembly and fuel vapor tube from the fuel level sensor. You should use the Fuel Tank Sender Unit Wrench to safety remove the fuel lock ring of the sensor unit while protecting the sensor from any damage. Use a suitable container to drain fuel from the tank while you remove the lock ring then extract the fuel level sensor by disconnecting the internal fuel tube coupling. Clean engine oil should be applied to a new O-ring before its installation and the old O-ring seal needs to be removed and discarded. Reverse the uninstallation steps by placing a new lock ring and O-ring seal then align the fuel level sensor arrows on the fuel tank before you tighten the lock ring to the stop tabs.

OEM Ford Flex Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Level Sensors found

View related parts
Ford Flex Fuel Pump, Driver Side Part Number: 8A4Z-9275-B
$239.81 MSRP: $398.18
You Save: $158.37 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sending Unit; Fuel Level Sensor; Hanger Assembly.; Fuel Pump Assembly; Fuel Sender Unit
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Fuel Gauge Sending Unit, Passenger Side Part Number: 8A4Z-9A299-CA
$40.53 MSRP: $64.36
You Save: $23.83 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit, Right; Fuel Level Sensor; Fuel Sending Unit; Level Sensor; Sending Unit
- Manufacturer Note: Sender For 9H307 Fuel Pump
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Fuel Gauge Sending Unit, Passenger Side Part Number: DA8Z-9A299-B
$62.81 MSRP: $105.45
You Save: $42.64 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Right Fuel Sender and Hanger; Fuel Pump Module; Level Sensor.; Level Sensor; Sending Unit
- Manufacturer Note: Sender For 9H307 Fuel Pump
- Position: Passenger Side
- Replaces: DA8Z-9A299-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Fuel Gauge Sending Unit, Driver Side Part Number: DA8Z-9A299-C
$61.99 MSRP: $102.00
You Save: $40.01 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Left Fuel Sender and Hanger Assembly; Fuel Level Sensor.; Level Sensor; Sending Unit
- Manufacturer Note: Sender For 9275 Fuel Pump
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Fuel Pump, Driver Side Part Number: DA8Z-9275-A
$112.71 MSRP: $185.45
You Save: $72.74 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Left Fuel Pump and Sender Assembly; Fuel Sending Unit; Fuel Transfer Unit.; Fuel Gauge Sending Unit; Fuel Pump Assembly
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Fuel Gauge Sending Unit, Driver Side Part Number: 8A4Z-9A299-DA
$33.32 MSRP: $52.91
You Save: $19.59 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Left Fuel Sender and Hanger Assembly; Fuel Level Sensor; Level Sensor; Sending Unit
- Manufacturer Note: Sender For 9275 Fuel Pump
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS

Ford Flex Fuel Level Sensor

OEM Fuel Level Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Level Sensor with long life and a perfect fit. Come to our website and find genuine Ford Flex parts. We keep a wide inventory of OEM Flex parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Flex Fuel Level Sensor is one of the important parts of the Ford Flex series that is admired not only for its stability but also for its flexibility. This electronic device placed in the fuel tank allows measuring the fuel level that means the drivers will get accurate data on their fuel level. The fuel level sensor has parts like the float, the actuating rod as well as the resistor; and all these are in work together to pass signals to the fuel gauge and this makes the feeling of driving better. This predicts efficient working of its components at high temperatures while using little power; thus it is the Ford Flex models identifying feature. Integration with multiple Flex models enables the driver to hugely depend on this sensor to support all kinds of Flex models. Thus, the Fuel Level Sensor's importance is not simply about the comfort, but rather about the improvement of vehicles' efficiency and, most importantly, safety due to a correct signal for the fuel level and no unexpected shortages. Also, the Ford Flex Fuel Level Sensor is easily calibrated meaning that it is possible to carry out easy servicing whenever the need arises. It is for this reason that this particular sensor has been constructed in a very strong manner; it incorporates the latest technology in the automotive market and is a representation of the quality produced by ford. All things considered, the Ford Flex Fuel Level Sensor is an important component of the car but it also strengthens the Ford Flex's positioning as a practical and strong vehicle suitable for families and other activities.

Ford Flex Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit, Passenger Side
8A4Z-9A299-CA
Q: How should one safely service the fuel level sensor on Ford Flex?
A:
The fuel level service requires safety precautions to keep away smoking or carrying lighted tobacco products or open flame sources from fuel-related components because dangerous fuel mixtures exist. Users must prevent the use of personal electronic devices in areas surrounding fuel components. The procedure to work on fuel tubes and system components requires relieving fuel system pressure first to avoid accidents and professionals should always disconnect the battery ground cable during evaporative emission system or fuel-related component maintenance. A serviceable fuel level sender exists within the fuel level sensor device. The starting point should consist of releasing fuel system pressure followed by disconnection of the battery ground cable. Open the Fuel Pump module access cover while you inspect and clean all module connections with no debris present inside the surrounding area. Use absorbent towelling around the working area before disconnecting the fuel pump module electrical connector. Route the fuel tank jumper tube to a fuel storage tanker which should drain about one-fourth of the fuel until the sensor mounting flange becomes exposed in the lowered fuel level. Access the sensor cover of the fuel level and cleanse its connections before disconnecting its electrical wires. Cut the connections of the fuel vapor tube assembly and fuel vapor tube from the fuel level sensor. You should use the Fuel Tank Sender Unit Wrench to safety remove the fuel lock ring of the sensor unit while protecting the sensor from any damage. Use a suitable container to drain fuel from the tank while you remove the lock ring then extract the fuel level sensor by disconnecting the internal fuel tube coupling. Clean engine oil should be applied to a new O-ring before its installation and the old O-ring seal needs to be removed and discarded. Reverse the uninstallation steps by placing a new lock ring and O-ring seal then align the fuel level sensor arrows on the fuel tank before you tighten the lock ring to the stop tabs.