What safety precautions should be observed when servicing the fuel gauge sender and fuel pump module on Ford Flex?

Safety procedures should be followed during fuel gauge sender and fuel pump module servicing operations because highly flammable mixtures exist in the range. The first steps involve decreasing fuel system pressure together with disconnecting the battery cable. The first task is to remove the fuel pump module access cover for cleaning the flange surfaces and couplings along with connections from all dirt. The fuel pump module electrical connector needs to be disconnected but you should place absorbent wicking near to collect any fuel leakage. After disconnecting the fuel tank jumper tube from the fuel pump module quick connect coupling you can attach a fuel storage tanker to remove about one-fourth of the fuel volume until the fuel level matches the pump module mounting flange height. The Fuel Tank Sender Unit Wrench must be used to remove the lock ring at which point discard it. Cautiously extract the fuel pump module from the fuel tank after disconnecting its internal fuel tube quick connect coupling. Drain the fuel from the container into an appropriate container before inspecting the damaged areas between the flange and O-ring contact surfaces of the module. Adjustments or surface polishing are strictly prohibited. Replacement of both the fuel pump module or fuel tank becomes necessary in case of damage. Place clean engine oil on the new O-ring seal while installing it with a new lock ring by aligning the arrows between the pump module and fuel tank before tightening the lock ring to rest against the fuel tank stop tabs.

OEM Ford Flex Fuel Pump

Gas Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuel Pumps found

View related parts
Ford Flex Fuel Pump Part Number: AA5Z-9350-A
$608.63 MSRP: $901.67
You Save: $293.04 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Fuel; Direct Injection High Pressure Fuel Pump; Fuel Pump Cut-Off Switch; Gasoline Injector Pump.
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Flex | Limited, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Fuel Pump, Passenger Side Part Number: AA8Z-9H307-B
$356.29 MSRP: $591.60
You Save: $235.31 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump, Right; Fuel Pump Module Assembly; Fuel Pump Assembly
- Position: Passenger Side
- Replaces: AA8Z-9H307-A, PFS-529
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Flex | Limited, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Fuel Pump, Driver Side Part Number: 8A4Z-9275-B
$239.81 MSRP: $398.18
You Save: $158.37 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sending Unit; Fuel Level Sensor; Hanger Assembly.; Fuel Pump Assembly; Fuel Sender Unit
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2012 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Fuel Pump, Driver Side Part Number: DA8Z-9275-A
$112.71 MSRP: $185.45
You Save: $72.74 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Left Fuel Pump and Sender Assembly; Fuel Sending Unit; Fuel Transfer Unit.; Fuel Gauge Sending Unit; Fuel Pump Assembly
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Fuel Pump, Passenger Side Part Number: DA8Z-9H307-K
$258.42 MSRP: $429.09
You Save: $170.67 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Fuel Pump and Sender Assembly, Right; Electric Fuel Pump, Right; Fuel Pump Module Assembly; Fuel Pump Assembly; Electric Fuel Pump
- Position: Passenger Side
- Replaces: DA8Z-9H307-D, PFS-940
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Flex | Limited | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Fuel Pump, Passenger Side Part Number: AE9Z-9H307-A
$349.31 MSRP: $580.00
You Save: $230.69 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump, Right; Fuel Pump Module Assembly; Fuel Pump Assembly; Electric Fuel Pump
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Fuel Pump, Passenger Side Part Number: 8A8Z-9H307-A
$377.78 MSRP: $627.27
You Save: $249.49 (40%)
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump, Right; Fuel Pump Module Assembly; Fuel Pump Assembly; Electric Fuel Pump
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS

Ford Flex Fuel Pump

OEM Fuel Pump boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Pump with long life and a perfect fit. Come to our website and find genuine Ford Flex parts. We keep a wide inventory of OEM Flex parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Flex Fuel Pump This is a very essential component of Ford Flex series, to support Ford Flex series it is very important that everything working round the car especially the fuel delivery from the fuel tank to the engine is as efficient as possible to support the powers of the Ford Flex. The present electric Fuel Pump is generally installed inside the tank and they work under high pressures (40-60 psi) as compared to those Mechanical types, where it benefits in cooling as well as safety factors. Particularly, the Ford Flex models range from the base model, the Flex SE, the mid-level version which is the SEL and the Limited; therefore, Ford Motor Company has ensured the Fuel Pump can be used in Flex models across this range. It is essential in supply and distribution of fuel for the engine to perform well thus improving the driving moment of the vehicle. The Ford Fuel Pump also has features like pulse width modulation which greatly enhances the pump's up time boosting it well ahead of the rest of the cars on the road. Thus, the application of the Ford Flex attributes multiple functions, including convenience of the free space, comfortable chairs, and the perfect measured distance between the wheels. The incorporation of the Fuel Pump under this new system does not only help in the performance but also in safety and reliability of the vehicle on the road. For this reason, the Ford Fuel Pump is a significant element that increases the worth of the vehicle and provides clients with a worthy purchase for overcoming any road tests.

Ford Flex Fuel Pump Parts and Q&A

Fuel Pump, Driver Side
8A4Z-9275-B
Q: What safety precautions should be observed when servicing the fuel gauge sender and fuel pump module on Ford Flex?
A:
Safety procedures should be followed during fuel gauge sender and fuel pump module servicing operations because highly flammable mixtures exist in the range. The first steps involve decreasing fuel system pressure together with disconnecting the Battery Cable. The first task is to remove the fuel pump module access cover for cleaning the flange surfaces and couplings along with connections from all dirt. The fuel pump module electrical connector needs to be disconnected but you should place absorbent wicking near to collect any fuel leakage. After disconnecting the fuel tank jumper tube from the fuel pump module quick connect coupling you can attach a fuel storage tanker to remove about one-fourth of the fuel volume until the fuel level matches the pump module mounting flange height. The Fuel Tank Sender Unit Wrench must be used to remove the lock ring at which point discard it. Cautiously extract the fuel pump module from the fuel tank after disconnecting its internal fuel tube quick connect coupling. Drain the fuel from the container into an appropriate container before inspecting the damaged areas between the flange and O-ring contact surfaces of the module. Adjustments or surface polishing are strictly prohibited. Replacement of both the fuel pump module or fuel tank becomes necessary in case of damage. Place clean engine oil on the new O-ring seal while installing it with a new lock ring by aligning the arrows between the pump module and fuel tank before tightening the lock ring to rest against the fuel tank stop tabs.