How to Service and Repair the Accelerator Cable for the 1.8L/2.0L Engine on Ford Focus?

Service throttle cable 1.8L/2.0L- Use a disconnect on the accelerator cable and pull the retaining clip off. Unscrew the cable to the bracket and pedal and pull out the footwell trim panel. To install, follow the order in reverse, making sure that rubber grommets are in-place when the accelerator cable is attached.

How to service the accelerator cable for the 2.0L Duratec ST on Ford Focus?

To maintain the accelerator cable 2.0L Duratec ST, disconnect it at both ends (throttle body and pedal), and perform the required removal of clips or trim. Add a draw cord to make it easily installable. Vital: Uninstall by following a reversal of the procedure, and make sure that before reinserting the cable, rubber grommet should be installed.

OEM Ford Focus Accelerator Cable

Choke Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Accelerator Cables found

View related parts
Ford Focus Throttle Cable Part Number: 6S4Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Control
- Replaces: 4S4Z-9A758-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | S, SE, SES, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Throttle Cable Part Number: 3S4Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Control
- Manufacturer Note: PZEV
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | ST, ZX4 ST | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Throttle Cable Part Number: 1S4Z-9A758-PA
Product Specifications
- Other Name: Cable Assembly - Control
- Manufacturer Note: DOHC
- Replaces: YS4Z-9A758-PA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Focus | SE, Sony Limited Edition, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Throttle Cable Part Number: 1S4Z-9A758-EA
Product Specifications
- Other Name: Cable Assembly - Control
- Manufacturer Note: SPI
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | LX, SE | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Throttle Cable Part Number: 3S4Z-9A758-BE
Product Specifications
- Other Name: Cable Assembly - Control
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford Focus | SE, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Throttle Cable Part Number: 2M5Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Control
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Focus | SVT | 4 Cyl 2.0 L GAS

Ford Focus Accelerator Cable

Welcome to our website where you can discover high-quality, genuine Ford Focus Accelerator Cable. We offer an extensive inventory of OEM Ford Focus Accelerator Cable at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Focus Accelerator Cable Parts and Q&A

Throttle Cable
2M5Z-9A758-AA
Q: How to Service and Repair the Accelerator Cable for the 1.8L/2.0L Engine on Ford Focus?
A: Service Throttle Cable 1.8L/2.0L- Use a disconnect on the accelerator cable and pull the retaining clip off. Unscrew the cable to the bracket and pedal and pull out the footwell trim panel. To install, follow the order in reverse, making sure that rubber grommets are in-place when the accelerator cable is attached.
Throttle Cable
1S4Z-9A758-EA
Q: How to service the accelerator cable for the 2.0L Duratec ST on Ford Focus?
A: To maintain the accelerator cable 2.0L Duratec ST, disconnect it at both ends (Throttle Body and pedal), and perform the required removal of clips or trim. Add a draw cord to make it easily installable. Vital: Uninstall by following a reversal of the procedure, and make sure that before reinserting the cable, rubber grommet should be installed.