How to Safely Service and Properly Install the Fuel Filler Hose on Ford Focus?

Safety protocols require you to stay away from smoking and open flames when attending to the fuel tank filler pipe because of its highly flammable vapor content. The rubber hose portion of the filler pipe does not receive individual service which requires the installer to use new filler pipe assembly when necessary. The service begins with wheel nut loosening on the right-hand rear wheel followed by removing the fuel filler cap. Position the vehicle in neutral on a hoist and remove the right-hand rear wheel together with the splash shield. When removing the fuel tank vent and filler pipe utilize only tools with rounded edges because sharp tools might damage these components. Make note of how the retaining components are situated for their return to original position. Reverse the procedure by disconnecting all fuel tank vent tubes and solenoid tubes while protecting the canister vent solenoid from damage. Uninstall the fuel filler pipe after loosening the tie straps and removing its two bolts. When installing the device position the orientation mark of the fill hose with the filler inlet mark on the tank then use an original stainless steel clamp if a hose clamp is required. Replace and fasten the fuel filler pipe by installing the retainer clamp and both clips according to their original placement. A complete reverse procedure followed by testing the evaporative emission system leaks will confirm proper function.

OEM Ford Focus Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Fuel Filler Hoses found

View related parts
Ford Focus Filler Tube Part Number: 8U5Z-17B068-K
$6.36 MSRP: $9.02
You Save: $2.66 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Funnel; Fuel Filler Neck Adapter; Fuel Filler Hose; Tube; Filler
- Replaces: 8U5Z-17B068-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Filler Tube Part Number: 8U5Z-17B068-B
$6.11 MSRP: $8.67
You Save: $2.56 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Funnel; Fuel Filler Neck Adapter; Fuel Filler Neck Sleeve; Filler Neck Sleeve; Fuel Filler Hose; Fuel Tank Filler; Filler Pipe Tube; Tube; Filler
- Manufacturer Note: Attached To Underneath 42624 In Luggage Compartment
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012 Ford Focus | S, SE, SEL, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Tank Pressure Sensor Part Number: BV6Z-9C047-B
$113.98 MSRP: $181.00
You Save: $67.02 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Fuel Feed; Evaporative Emissions System Lines; PCV Valve Hose; EGR Tube; Tube
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | SE, SEL, ST, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Tank Pressure Sensor Part Number: BV6Z-9C047-A
$114.49 MSRP: $181.80
You Save: $67.31 (38%)
ADD TO CART
Product Specifications
- Other Name: Tube - Fuel Feed; Evaporative Emissions System Lines; PCV Valve Hose; EGR Tube; Tube
- Manufacturer Note: Part Includes 9C052 Pressure Transducer
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | S, SE, SEL, ST, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Filler Pipe Part Number: G1FZ-9034-E
$619.99 MSRP: $918.50
You Save: $298.51 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck
- Replaces: G1FZ-9034-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Inlet Tube Part Number: G1FZ-9C047-A
$171.29 MSRP: $272.00
You Save: $100.71 (38%)
ADD TO CART
Product Specifications
- Other Name: Tube - Fuel Feed; Evaporative Emissions System Lines; EGR Tube; Tank Pressure Sensor
- Manufacturer Note: Part Includes 9C052 Pressure Transducer
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Hose Part Number: G1FZ-9047-A
$55.04 MSRP: $80.12
You Save: $25.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Filler Pipe; Fuel Filler Hose; Fuel Filler Neck; Fuel Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Ford Focus | RS | 4 Cyl 2.3 L GAS
View related parts
Ford Focus Filler Neck Part Number: 2M5Z-9034-CA
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
- Manufacturer Note: 4 Door Wagon
- Replaces: YS4Z-9034-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | SE, ZTW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Filler Neck Part Number: 2M5Z-9034-BA
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
- Manufacturer Note: 4 Door Sedan
- Replaces: YS4Z-9034-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | LX, SE, Sony Limited Edition, ZTS | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Filler Neck Part Number: 2M5Z-9034-AA
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
- Manufacturer Note: Pipe asy - fuel filler, 3 door and 5 door sedan
- Replaces: YS4Z-9034-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | SVT, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

Ford Focus Fuel Filler Hose

OEM Fuel Filler Hose boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Filler Hose with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Fuel Filler Hose is an important aspect in the Ford Focus vehicles since it has the responsibility of funning fuel into the fuel tank. This part is firmly fixed to the fuel fill cap inlet with clamps and screws so as to guarantee strong hold. It may also be referred to as a Fill Pipe Hose (more specifically as the Fuel Fill Pipe Hose) or just a Fuel Hose. Although the overview does not speak about the difference in types or style of Fuel Filler Hose which may have been used in different models of the Ford Focus; it stresses concerning the right connection and proper tightness for better working. Some of the aspects regarding dealing with the Fuel Delivery System is that the design and the installation methodology play a significant role in the proper function of this part, and thus, introduction to the Fuel Filler Hose.

Ford Focus Fuel Filler Hose Parts and Q&A

Filler Neck
2M5Z-9034-BA
Q: How to Safely Service and Properly Install the Fuel Filler Hose on Ford Focus?
A:
Safety protocols require you to stay away from smoking and open flames when attending to the fuel tank filler pipe because of its highly flammable vapor content. The rubber hose portion of the filler pipe does not receive individual service which requires the installer to use new filler pipe assembly when necessary. The service begins with wheel nut loosening on the right-hand rear wheel followed by removing the fuel filler cap. Position the vehicle in neutral on a hoist and remove the right-hand rear wheel together with the splash shield. When removing the fuel tank vent and filler pipe utilize only tools with rounded edges because sharp tools might damage these components. Make note of how the retaining components are situated for their return to original position. Reverse the procedure by disconnecting all fuel tank vent tubes and solenoid tubes while protecting the canister vent solenoid from damage. Uninstall the fuel filler pipe after loosening the tie straps and removing its two bolts. When installing the device position the orientation mark of the fill hose with the filler inlet mark on the tank then use an original stainless steel clamp if a hose clamp is required. Replace and fasten the fuel filler pipe by installing the retainer clamp and both clips according to their original placement. A complete reverse procedure followed by testing the evaporative emission system leaks will confirm proper function.