How to Service and Repair the Vapor Canister on a 4-Door or Wagon on Ford Focus?

Service and repair operations on the evaporative emission control canister for 4-door or wagon vehicles must begin with disconnecting the battery ground cable for fuel vapor safety. Set the vehicle on the hoist at neutral position where suspension loading maintains appropriate curb height. Users of twin post hoists need to stabilize the rear lower control arms when performing the operation. Lower the rear stabilizer bar by removing its four bracket bolts and position the stabilizer bar bushings correctly while avoiding the use of lubricants to prepare it for EVAP canister removal. The technician needs to disconnect the EVAP vent solenoid electrical connector as well as the EVAP tube along with releasing the vapor tube retainer from the EVAP canister. First disconnect the vapor tube quick connect coupling from the EVAP canister before removing the three EVAP canister retaining nuts fasten them to 5 Nm (44 lb-in) during reinstallation. The maintenance ends by testing evaporative emission system leaks then initiating the evaporative emission repair verification drive cycle after reversing the removal steps.

What Precautions Should Be Taken When Handling the Vapor Canister for 3-Door and 5-Door on Ford Focus?

The evaporative emission control canister of 3-door and 5-door models needs special care as it contains fuel vapor together with condensed fuel vapor that can lead to explosion or fire incidents. The service startup requires users to disconnect the battery ground cable because it reduces this risk factor. The first service step requires removal of the fuel tank and then the evaporative emission (EVAP) canister vent solenoid must be removed. The EVAP tube needs to be separated from its pin-type retainer on the EVAP canister before releasing the quick connect coupling from the canister itself. The installation process consists of reattaching the EVAP canister and follows the opposite procedure of removal while tightening nuts to 6 Nm (53 lb-in). A final check must include conducting an evaporative emission system leak test while performing the evaporative emission repair verification drive cycle to verify system functionality.

OEM Ford Focus Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Vapor Canisters found

View related parts
Ford Focus Vapor Canister Part Number: BV6Z-9D653-D
$104.64 MSRP: $172.18
You Save: $67.54 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Replaces: CX-2413, CX-2457, BV6Z-9D653-C, BV6Z-9D653-B, BV6Z-9D653-A, CX-2474
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Vapor Canister Part Number: 7S4Z-9D653-A
$344.28 MSRP: $560.00
You Save: $215.72 (39%)
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Replaces: 5S4Z-9D653-CA, 6S4Z-9D653-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | S, SE, SES, ST, ZX4 ST | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Vapor Canister Part Number: AS4Z-9D653-B
$280.91 MSRP: $450.00
You Save: $169.09 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Vapor Canister Part Number: 9S4Z-9D653-B
$229.72 MSRP: $368.00
You Save: $138.28 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Replaces: 8S4Z-9D653-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Vapor Canister Part Number: F65Z-9D653-AA
$85.64 MSRP: $140.91
You Save: $55.27 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Vapor Canister Part Number: AS4Z-9D653-F
$79.67 MSRP: $131.09
You Save: $51.42 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Replaces: AS4Z-9D653-C, CX-2388, AS4Z-9D653-E, CX-2511, CX-2458, CX-2473, AS4Z-9D653-A, AS4Z-9D653-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2018 Ford Focus | RS, S, SE, SEL, SES, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Vapor Canister Part Number: F87Z-9D653-CA
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | S, SE, SES, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Vapor Canister Part Number: 7S4Z-9D653-B
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Cannister - Fuel Vapour Store
- Replaces: 6S4Z-9D653-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | S, SE, SES, ZX3, ZX5 | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Vapor Canister Part Number: 3S4Z-9D653-BA
Product Specifications
- Other Name: Cannister - Fuel Vapour; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Manufacturer Note: This is a complete assembly-includes filter, canister, bracket, solenoid, hose, spring and clip. Located under vehicle. No serviceable components. For buffer canister, refer to 9G479., PZEV, 3DR/5DR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford Focus | ST, SVT, ZX3, ZX4 ST, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Vapor Canister Part Number: 3S4Z-9D653-AA
Product Specifications
- Other Name: Cannister - Fuel Vapour; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Manufacturer Note: This is a complete assembly-includes filter, canister, bracket, solenoid, hose, spring and clip. Located under vehicle. No serviceable components. For buffer canister, refer to 9G479., PZEV, 4DR/Wagon
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Focus | LX, SE, ZTS, ZTW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Vapor Canister Part Number: 9S4Z-9D653-A
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Canister; Cannister - Fuel Vapour Store
- Replaces: 8S4Z-9D653-B, 8S4Z-9D653-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS

Ford Focus Vapor Canister

OEM Vapor Canister boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Vapor Canister with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Vapor Canister is located in Ford Focus automobiles as part of the EVAP system; the objective of this system is to minimize or eradicate the HC emissions which pose a threat to the environment. Known also as the charcoal canister, this canister is filled with activated charcoal that adsorbs fuel vapors and stores them for future use for the engine. The canister is attached to the fuel tank and engine and consist of purge valve that controls the amount of vapor to allow into the engine for burning. In the more recent past, added features have been incorporated into the enhanced EVAP systems in order to incorporate canister vent solenoids as well as fuel tank pressure sensors to help in the identification of possible cases of leakage as well as check proper working. The Vapor Canister is quite important as far as emission and the standard environmental control is concerned for Ford Focus cars.

Ford Focus Vapor Canister Parts and Q&A

Vapor Canister
3S4Z-9D653-BA
Q: How to Service and Repair the Vapor Canister on a 4-Door or Wagon on Ford Focus?
A:
Service and repair operations on the evaporative emission control canister for 4-door or wagon vehicles must begin with disconnecting the battery ground cable for fuel vapor safety. Set the vehicle on the hoist at neutral position where suspension loading maintains appropriate curb height. Users of twin post hoists need to stabilize the rear lower Control Arms when performing the operation. Lower the rear stabilizer bar by removing its four bracket bolts and position the stabilizer bar bushings correctly while avoiding the use of lubricants to prepare it for EVAP canister removal. The technician needs to disconnect the EVAP vent solenoid electrical connector as well as the EVAP tube along with releasing the vapor tube retainer from the EVAP canister. First disconnect the vapor tube quick connect coupling from the EVAP canister before removing the three EVAP canister retaining nuts fasten them to 5 Nm (44 lb-in) during reinstallation. The maintenance ends by testing evaporative emission system leaks then initiating the evaporative emission repair verification drive cycle after reversing the removal steps.
Vapor Canister
7S4Z-9D653-A
Q: What Precautions Should Be Taken When Handling the Vapor Canister for 3-Door and 5-Door on Ford Focus?
A:
The evaporative emission control canister of 3-door and 5-door models needs special care as it contains fuel vapor together with condensed fuel vapor that can lead to explosion or fire incidents. The service startup requires users to disconnect the battery ground cable because it reduces this risk factor. The first service step requires removal of the Fuel Tank and then the evaporative emission (EVAP) canister vent solenoid must be removed. The EVAP tube needs to be separated from its pin-type retainer on the EVAP canister before releasing the quick connect coupling from the canister itself. The installation process consists of reattaching the EVAP canister and follows the opposite procedure of removal while tightening nuts to 6 Nm (53 lb-in). A final check must include conducting an evaporative emission system leak test while performing the evaporative emission repair verification drive cycle to verify system functionality.