How to service and repair the front bumper cover on Ford Freestar?

The service and repair of front bumper cover requires positioning the vehicle to neutral at a hoist. Start by removing the headlights before moving on to detach the eight upper air-deflector pin-type retainers as well as the upper air deflector from the vehicle. The front bumper cover requires removal of its four upper bolts while tightening them to 7 Nm (62 lb-in) when reinstalling. The thirteen lower screws on the front bumper cover need to be removed before installation at the specified torque of 2 Nm (18 lb-in). Remove the pin-type retainers and disconnect all fog lamp electrical connectors together with the parking aid harness electrical connector when present. Replace the front bumper cover after finishing the reversal of removal steps.

OEM Ford Freestar Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Bumpers found

View related parts
Ford Freestar Bumper Cover, Front
Part Number: 3F2Z-17D957-RAA
$366.05 MSRP: $506.40
You Save: $140.35 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Freestar | S, SE | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
Ford Freestar Impact Bar, Front
Part Number: 3F2Z-17757-AA
$104.39 MSRP: $142.06
You Save: $37.67 (27%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Replaces: XF2Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Freestar | Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
Ford Freestar Bumper Cover, Rear
Part Number: 3F2Z-17K835-RAA
$361.43 MSRP: $495.88
You Save: $134.45 (28%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Freestar | SES | 6 Cyl 3.9 L GAS
View related parts
Ford Freestar Impact Bar, Rear
Part Number: 3F2Z-17906-AA
$129.09 MSRP: $178.59
You Save: $49.50 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper; Bumper Impact Bar, Rear
- Position: Rear
- Replaces: 3F2Z-17906-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Freestar | Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
Ford Freestar Impact Bar, Rear
Part Number: 6F2Z-17906-A
Product Specifications
- Other Name: Bumper; Bumper Impact Bar, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Ford Freestar | Base, Limited, SE, SEL | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
Ford Freestar Bumper Cover, Rear
Part Number: 3F2Z-17K835-SAA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Freestar | Base, S, SE | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
Ford Freestar Bumper Cover, Rear
Part Number: 3F2Z-17K835-PAA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Freestar | Limited, SEL | 6 Cyl 4.2 L GAS
View related parts
Ford Freestar Bumper Cover, Rear
Part Number: 3F2Z-17K835-MAA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Freestar | Base, S | 6 Cyl 3.9 L GAS
View related parts
Ford Freestar Bumper Cover, Front
Part Number: 3F2Z-17D957-SAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Freestar | Base | 6 Cyl 3.9 L GAS
View related parts
Ford Freestar Bumper Cover, Front
Part Number: 3F2Z-17D957-NAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Freestar | Limited, SEL | 6 Cyl 4.2 L GAS
View related parts
Ford Freestar Bumper Cover, Front
Part Number: 3F2Z-17D957-MAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Freestar | SES | 6 Cyl 3.9 L GAS

Ford Freestar Bumper

Welcome to our website where you can discover high-quality, genuine Ford Freestar Bumper. We offer an extensive inventory of OEM Ford Freestar Bumper at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Freestar Bumper Parts Questions & Experts Answers

Bumper Cover, Front
3F2Z-17D957-RAA
Q: How to service and repair the front bumper cover on Ford Freestar?
A: The service and repair of front bumper cover requires positioning the vehicle to neutral at a hoist. Start by removing the headlights before moving on to detach the eight upper air-deflector pin-type retainers as well as the upper air deflector from the vehicle. The front bumper cover requires removal of its four upper bolts while tightening them to 7 Nm (62 lb-in) when reinstalling. The thirteen lower screws on the front bumper cover need to be removed before installation at the specified torque of 2 Nm (18 lb-in). Remove the pin-type retainers and disconnect all fog lamp electrical connectors together with the parking aid harness electrical connector when present. Replace the front bumper cover after finishing the reversal of removal steps.