Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM Ford Freestar Fuel Pressure Sensor

Fuel Tank Pressure Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

  • Ford Freestar Fuel Pressure Sensor - 3F2Z-9G756-AC
    Ford Freestar Fuel Pressure Sensor Diagram - 3F2Z-9G756-AC
    View related parts

    Ford Freestar Pressure Sensor
    Part Number: 3F2Z-9G756-AC

    $84.64 MSRP: $139.27
    You Save: $54.63 (40%)
    Ships in 1 Business Day
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Fuel Injector Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Damper; Fuel Pressure Sensor; Damper
    • Manufacturer Note: Also serviced in 9F792. Mounting screws W705870-S437, 6.8L
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2004-2007 Ford Freestar | Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

Ford Freestar Fuel Pressure Sensor

Welcome to our website where you can discover high-quality, genuine Ford Freestar Fuel Pressure Sensor. We offer an extensive inventory of OEM Ford Freestar Fuel Pressure Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Freestar Fuel Pressure Sensor Parts Questions & Experts Answers

  • Ford Freestar Fuel Pressure Sensor - 3F2Z-9G756-AC Pressure Sensor Pressure Sensor
    3F2Z-9G756-AC
    Q: How to Service the Fuel Pressure Sensor on the Fuel Rail on Ford Freestar?
    A: The service process of the fuel rail pressure and temperature sensor begins with disconnection of the battery ground cable. Safety requires that you must relieve fuel system pressure since it stays at high pressure after shutting down the engine. The service process starts with disconnecting both the electrical connector and vacuum hose that connect to the fuel rail pressure and temperature sensor. Begin by taking out the sensor after unscrewing its two bolts. You should install the new sensor with 5 Nm (44 lb-in) torque value on the bolts then test the O-ring seal for replacements if needed. The new O-ring requires cleaning engine oil for lubrication before putting theparts together in the opposite order to finish the mounting.

Related Ford Freestar Parts

Browse Ford Freestar Fuel Pressure Sensor by Years

+
2007 2006 2005 2004