OEM Ford Freestyle Brake Rotor

Ford Freestyle Brake Rotor Parts and Q&A

• Rotor, Front
  8G1Z-1125-B
  Q: How to remove and replace the rear Brake Rotor on Ford Freestyle?

  A:

  Before starting the rear brake disc replacement task make sure to park your vehicle in neutral position on a hoist. During brake caliper anchor plate removal users should keep the plate from hanging on brake hoses while furnishing proper sustaining structures. Divide the brake caliper anchor plate bolts and discard these components before safely placing the plate to the side. During reinstallation position the anchor plate bolts at 110 Nm (81 lb-ft). Remove the brake disc screw during its removal while installing the part requires a torque of 21 Nm (15 lb-ft). When the installation is completed the worker should reverse the removal steps by fitting two new brake caliper anchor plate bolts while using the same procedure.
• Rotor
  5U2Z-1V125-GD
  Q: How to Service the Rear Brake Rotor on Ford Freestyle?

  A:

  The service process of rear brake rotor/disc begins by placing the vehicle in neutral and mounting it on a hoist. Supporting platforms should replace the brake caliper anchor plate when you need to remove it because hanging the anchor plate from the brake hose is dangerous. Stop the brake caliper anchor plate bolts from use and set the plate aside after their removal. Reinstall the anchor plate by tightening it to 110 Nm (81 ft. lbs.). After removal of the brake disc screw you need to discard it but during installation apply force of 21 Nm (15 ft. lbs.). Reverse the removal steps to install the brake components by using two new brake caliper anchor plate bolts.