How to Service and Repair the Air Bag Control Module on Ford Fusion?

The Restraints Control Module (RCM) requires servicing under two conditions: first check that the ignition switch is off and secondly maintain the RCM at its original horizontal position when connected because any modification to the position poses a significant risk of Safety Canopy(R) deployment leading to fatal injuries. The RCM and impact sensor mounting areas should be checked for deformation after any crash incident because new parts must be installed under all circumstances regardless of air bag deployment status. Run Programmable Module Installation (PMI) during new RCM installation to eliminate system failure occurrences. Before disconnection of the large RCM electrical connector through the thumb tab press and connector position assurance lever pivot you must depower the Supplemental Restraint System (SRS). After RCM extraction install the new unit using 12 Nm (106 lb-in) torque for right-hand bolts and the left-hand bolt to match this value. The proper alignment of the large RCM connector should be verified prior to connection by applying gentle force until an audible click forms and finally locking it with the connector position assurance lever. The SRS system should be powered up without immediate proof testing followed by completion of the PMI procedure when installing a new RCM. The verification of SRS functions requires a sequence of switching the ignition from ON to OFF and waiting 10 seconds before returning it to ON while watching the air bag warning indicator which should activate for 6 seconds before shutting off. Further inspection is necessary for the warning indicator when it fails to illuminate or stays on continuously or flashes at 5 Hz rate. The process needs all persistent Diagnostic Trouble Codes (DTCs) to be eliminated from both the RCM and Occupant Classification System Module (OCSM) through scan tool diagnostics.

OEM Ford Fusion Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Air Bag Control Modules found

View related parts
Ford Fusion SDM Module Part Number: DP5Z-14B321-B
$503.49 MSRP: $789.42
You Save: $285.93 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Diagnostic Unit; Sensor Assembly - Air Bag
- Manufacturer Note: RESTRAINT CONTROL MODULE
- Replaces: DP5Z-14B321-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Diagnostic Module Part Number: AE5Z-14B321-B
$276.39 MSRP: $379.21
You Save: $102.82 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Unit
- Replaces: 9E5Z-14B321-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Fusion | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Fusion Diagnostic Module Part Number: AE5Z-14B321-A
$437.13 MSRP: $685.37
You Save: $248.24 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Unit
- Replaces: 9E5Z-14B321-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010 Ford Fusion | S, SE, SEL, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Control Module Part Number: LS7Z-14B321-E
$541.27 MSRP: $794.82
You Save: $253.55 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020 Ford Fusion | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Control Module Part Number: ES7Z-14B321-B
$445.33 MSRP: $698.23
You Save: $252.90 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; SDM Module; Sensor Assembly - Air Bag
- Replaces: ES7Z-14B321-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2016 Ford Fusion | Energi SE, Energi Titanium, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Diagnostic Module Part Number: BE5Z-14B321-C
$416.19 MSRP: $611.15
You Save: $194.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Unit; Sensor Assembly - Air Bag
- Replaces: BE5Z-14B321-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Fusion | S, SE, SEL, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Control Module Part Number: HS7Z-14B321-H
$559.34 MSRP: $887.83
You Save: $328.49 (37%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; SDM Module; Sensor Assembly - Air Bag
- Replaces: HS7Z-14B321-G, HS7Z-14B321-A, HS7Z-14B321-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion SDM Module Part Number: HP5Z-14B321-E
$488.98 MSRP: $766.67
You Save: $277.69 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Diagnostic Unit
- Manufacturer Note: RESTRAINT CONTROL MODULE
- Replaces: HP5Z-14B321-A, HP5Z-14B321-C, HP5Z-14B321-B, HP5Z-14B321-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Control Module Part Number: DS7Z-14B321-B
$143.05 MSRP: $220.75
You Save: $77.70 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; SDM Module; Sensor Assembly - Air Bag
- Replaces: DS7Z-14B321-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2015 Ford Fusion | Energi SE, Energi Titanium, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Diagnostic Module Part Number: 7E5Z-14B321-D
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Unit; Sensor Assembly - Air Bag
- Replaces: 7E5Z-14B321-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Diagnostic Module Part Number: 7E5Z-14B321-A
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Unit; Sensor Assembly - Air Bag
- Replaces: 6E5Z-14B321-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Diagnostic Module Part Number: BE5Z-14B321-D
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Unit; Sensor Assembly - Air Bag
- Replaces: BE5Z-14B321-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Fusion | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)

Ford Fusion Air Bag Control Module

OEM Air Bag Control Module boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Air Bag Control Module with long life and a perfect fit. Come to our website and find genuine Ford Fusion parts. We keep a wide inventory of OEM Fusion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Fusion Air Bag Control Module plays an essential role by operating within the Ford Fusion supplemental restraint system to maintain reliability together with excellent performance. Through monitoring collision sensors the advanced Air Bag Control Module detects impacts which allows it to deploy airbags swiftly during major collisions thus improving occupant protection. Post-accident evaluations heavily depend on the retention of crash data and diagnostic information that this control module provides for the Ford Fusion vehicles. Since 2005 the Air Bag Control Module started serving multiple Ford Fusion vehicles while transitioning from physical systems to advanced electronic control units which boosted both reliability and operational efficiency. The development of these systems by Ford has led to substantial cuts in head-on collision deaths because of their dedication to creating safe passenger environments. Between the Ford Focus and Taurus company Fusion maintains a dual popularity for its performance capabilities and environment-friendly features thus securing place in the market. The manufacturer Fusion Air Bag Control Module distinguishes itself in the automotive market by having integrated advanced safety technologies as unique features. The brand model Air Bag Control Module maintains its critical function as a driver of vehicle safety improvements and efficiency enhancements in the automaker's dedication to automobile safety innovation.

Ford Fusion Air Bag Control Module Parts and Q&A

Diagnostic Module
7E5Z-14B321-D
Q: How to Service and Repair the Air Bag Control Module on Ford Fusion?
A:
The Restraints Control Module (RCM) requires servicing under two conditions: first check that the ignition switch is off and secondly maintain the RCM at its original horizontal position when connected because any modification to the position poses a significant risk of Safety Canopy(R) deployment leading to fatal injuries. The RCM and impact sensor mounting areas should be checked for deformation after any crash incident because new parts must be installed under all circumstances regardless of air bag deployment status. Run Programmable Module Installation (PMI) during new RCM installation to eliminate system failure occurrences. Before disconnection of the large RCM electrical connector through the thumb tab press and connector position assurance lever pivot you must depower the Supplemental Restraint System (SRS). After RCM extraction install the new unit using 12 Nm (106 lb-in) torque for right-hand bolts and the left-hand bolt to match this value. The proper alignment of the large RCM connector should be verified prior to connection by applying gentle force until an audible click forms and finally locking it with the connector position assurance lever. The SRS system should be powered up without immediate proof testing followed by completion of the PMI procedure when installing a new RCM. The verification of SRS functions requires a sequence of switching the ignition from ON to OFF and waiting 10 seconds before returning it to ON while watching the air bag warning indicator which should activate for 6 seconds before shutting off. Further inspection is necessary for the warning indicator when it fails to illuminate or stays on continuously or flashes at 5 Hz rate. The process needs all persistent Diagnostic Trouble Codes (DTCs) to be eliminated from both the RCM and Occupant Classification System Module (OCSM) through scan tool diagnostics.