How to service the rear door window regulator and motor on Ford Fusion?

A proper service of the rear door window regulator and motor needs you to detach both the rear door trim panel and the access hole plugs. Service of the rear door window regulator requires removing the motor if it fails to operate properly. The window should be lowered to expose glass clamp bolts through the access hole plugs before loosening these bolts but retightening them to 6 Nm (53 lb-in) for reinstallation. Tape the window in its place before lowering the window regulator until it touches the stops at the bottom of the regulator tracks. Begin by taking out the door speaker together with the interior door handle screw before placing the handle in a safe location. Remove the wiring harness retainers before taking away the wiring harness cover plate to detach the two door latch cable retainers. You should tighten the door module bolts to 11 Nm (8 lb-ft) when reattaching them during the process. The door latch electrical connector must be disconnected prior to removing the rear door module assembly together with necessary transfers for new module installation. The process ends by following the reverse sequence of steps for installation.

How to service the front door window regulator and motor on Ford Fusion?

Start the procedure of servicing front door window regulator and motor by taking out the door trim panel and then unfastening the wiring harness cover plate and access hole plug. The motor operation should be checked before the technician moves on to lower the window to expose window glass clamp bolts for removal of the motor. Construction of the rear B-pillar window glass clamp bolt starts by disconnecting its door latch cable retainers with light torque of 6 Nm (53 lb-in) for reinstallation. The next step involves loosening the A-pillar window glass clamp bolt prior to the installation where you will need to tighten it to 6 Nm (53 lb-in). Stick the window in position before lowering the window regulator until it stops at the lowest points of the tracks. Climb into the front seat and remove the speaker from the front door while taking out the interior handle bolt and setting the handle to the side. The wiring harness retainers and all door electrical connectors including door latch, keyless entry keypad and door lock (if available) and power mirror (if necessary) need to be disconnected. The installation requires removal of the 10 door module bolts as well as the window regulator motor electrical connector followed by torqueing them to 11 Nm (8 lb-ft) when reinstalling. The process involves removing the front door module while moving essential components during replacement of an updated module. When performing the installation reverse the prior removal steps while ensuring initialization of new front window motors for MKZ vehicles. At the same time, follow the procedure to de-initialize and initialize the original motors.

OEM Ford Fusion Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Window Regulators found

View related parts
Ford Fusion Window Regulator, Front Driver Side Part Number: 8E5Z-5423201-A
$81.25 MSRP: $131.09
You Save: $49.84 (39%)
ADD TO CART
Product Specifications
- Other Name: Regulator - Window - Less Motor; Front Left Power Window Motor and Regulator Assembly; Regulator Assembly
- Position: Front Driver Side
- Replaces: 6E5Z-5423201-AA, 6E5Z-5423201-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Window Regulator, Front Passenger Side Part Number: 8E5Z-5423200-A
$78.79 MSRP: $129.64
You Save: $50.85 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Window - Less Motor; Front Right Power Window Motor and Regulator Assembly.; Regulator Assembly
- Position: Front Passenger Side
- Replaces: 6E5Z-5423200-AA, 6E5Z-5423200-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Window Regulator, Rear Driver Side Part Number: 8E5Z-5427001-A
$50.05 MSRP: $82.35
You Save: $32.30 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Window - Less Motor; Window Regulator, Rear Left; Window Assembly; Regulator Assembly
- Position: Rear Driver Side
- Replaces: 6E5Z-5427001-AA, 6E5Z-5427001-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Window Regulator, Rear Driver Side Part Number: HS7Z-5427009-A
$61.95 MSRP: $104.00
You Save: $42.05 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Window - Less Motor; Window Regulator, Rear Left; Regulator Assembly
- Position: Rear Driver Side
- Replaces: DS7Z-5427009-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Window Regulator, Rear Passenger Side Part Number: HS7Z-5427008-A
$61.95 MSRP: $104.00
You Save: $42.05 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Window - Less Motor; Window Regulator, Rear Right; Regulator Assembly
- Position: Rear Passenger Side
- Replaces: DS7Z-5427008-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Window Regulator, Front Driver Side Part Number: HS7Z-5423209-A
$70.91 MSRP: $119.05
You Save: $48.14 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Window - Less Motor; Window Regulator, Front Left
- Position: Front Driver Side
- Replaces: DS7Z-5423209-B, DS7Z-5423209-D, WLR-136, DS7Z-5423209-A, WLR-231
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Window Regulator, Front Passenger Side Part Number: HS7Z-5423208-A
$45.41 MSRP: $74.18
You Save: $28.77 (39%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Window - Less Motor; Window Regulator, Front Right
- Position: Front Passenger Side
- Replaces: DS7Z-5423208-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Window Regulator, Rear Passenger Side Part Number: 8E5Z-5427000-A
$65.60 MSRP: $89.27
You Save: $23.67 (27%)
ADD TO CART
Product Specifications
- Other Name: Regulator - Window - Less Motor; Window Regulator, Rear Right; Window Assembly; Regulator Assembly
- Position: Rear Passenger Side
- Replaces: 6E5Z-5427000-AA, 6E5Z-5427000-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS

Ford Fusion Window Regulator

OEM Window Regulator boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Window Regulator with long life and a perfect fit. Come to our website and find genuine Ford Fusion parts. We keep a wide inventory of OEM Fusion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Window Regulator in Ford Fusion cars has the basic task of moving the windows up and down thereby making it easy for users. These regulators can be electrically operated with the help of an electric motor or mechanically operated with the help of a crank depending upon the make of the bike. Through the years, Ford Fusion has featured scissor type and cable type Window Regulators and are designed to conform with superior standards in terms of fitments and operation. Since they are commonly used parts, Ford Fusion Window Regulators incessantly undergo a wearing out process that make them develop defects like Windows freezing. Replacing non-functional Window Regulators with functional and efficient ones may help the vehicle's windows to glide easily thereby increasing the general efficiency of the car. These parts of the vehicle are designed to be long lasting, strengthened by the use of high quality materials to serve the customer for a long time.

Ford Fusion Window Regulator Parts and Q&A

Window Regulator, Rear Driver Side
8E5Z-5427001-A
Q: How to service the rear door window regulator and motor on Ford Fusion?
A:
A proper service of the rear door window regulator and motor needs you to detach both the rear door trim panel and the access hole plugs. Service of the rear door window regulator requires removing the motor if it fails to operate properly. The window should be lowered to expose glass clamp bolts through the access hole plugs before loosening these bolts but retightening them to 6 Nm (53 lb-in) for reinstallation. Tape the window in its place before lowering the window regulator until it touches the stops at the bottom of the regulator tracks. Begin by taking out the door speaker together with the interior door handle screw before placing the handle in a safe location. Remove the wiring harness retainers before taking away the wiring harness cover plate to detach the two door latch cable retainers. You should tighten the door module bolts to 11 Nm (8 lb-ft) when reattaching them during the process. The door latch electrical connector must be disconnected prior to removing the rear door module assembly together with necessary transfers for new module installation. The process ends by following the reverse sequence of steps for installation.
Window Regulator, Front Driver Side
8E5Z-5423201-A
Q: How to service the front door window regulator and motor on Ford Fusion?
A:
Start the procedure of servicing front door window regulator and motor by taking out the door trim panel and then unfastening the wiring harness cover plate and access hole plug. The motor operation should be checked before the technician moves on to lower the window to expose window glass clamp bolts for removal of the motor. Construction of the rear B-pillar window glass clamp bolt starts by disconnecting its door latch cable retainers with light torque of 6 Nm (53 lb-in) for reinstallation. The next step involves loosening the A-pillar window glass clamp bolt prior to the installation where you will need to tighten it to 6 Nm (53 lb-in). Stick the window in position before lowering the window regulator until it stops at the lowest points of the tracks. Climb into the front seat and remove the speaker from the front door while taking out the interior handle bolt and setting the handle to the side. The wiring harness retainers and all door electrical connectors including door latch, keyless entry keypad and door lock (if available) and power mirror (if necessary) need to be disconnected. The installation requires removal of the 10 door module bolts as well as the window regulator motor electrical connector followed by torqueing them to 11 Nm (8 lb-ft) when reinstalling. The process involves removing the front door module while moving essential components during replacement of an updated module. When performing the installation reverse the prior removal steps while ensuring initialization of new front window motors for MKZ vehicles. At the same time, follow the procedure to de-initialize and initialize the original motors.