How to service and repair the front sway bar link on Ford Mustang?

Service and repair operations for the front sway bar link should begin by hoisting the vehicle through a lifting process. You should separate front sway bar links from the bar front by both removing bushings and nuts and discarding those nuts. Lift the sway bar until you can disconnect the links and proceed to remove the links by taking off the nuts and bushings. For installation, replace the components following the removal sequence using components with matching part numbers or equivalent parts since sway bar fasteners are essential for system and component performance. The precise retention of these parts depends on following all specified torque values during reassembly.

How to Service and Repair the Rear Sway Bar Link on Ford Mustang?

A hoist raises the vehicle first to begin service and repair processes on the rear sway bar link. The performance of vital systems heavily depends on suspension fasteners because their failure results in costly service expenses. Any fastener replacement requires using identical parts with matching original part numbers while the necessary substitutions require parts that are identical to the original finish and meet their corresponding property classes. Observation of specific torque values during reassembly will result in proper component retention. Prior to taking off the sway bar link nuts you need to loosen them first and then use the hex holding tool to stop the sway bar link ball joint from turning as you take out the nuts. Discard the nuts after removal. New nuts must be used for installation because the sway bar links feature torque prevailing nuts. First install the nuts until they become tight but afterward apply the hex holding feature to stop the ball joint movement before completing installation with a torque wrench and socket. Install the parts by using a method that is the opposite to the removal process.

OEM Ford Mustang Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Sway Bar Links found

View related parts
Ford Mustang Stabilizer Link, Front Part Number: FR3Z-5K483-A
$56.69 MSRP: $91.45
You Save: $34.76 (39%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Mustang | Bullitt, Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Stabilizer Link, Rear Part Number: BR3Z-5C488-A
$35.15 MSRP: $55.82
You Save: $20.67 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: 5R3Z-5C488-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Ford Mustang | Base, GT, Shelby GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Mustang Stabilizer Link, Rear Part Number: F2GZ-5C486-A
$45.80 MSRP: $72.73
You Save: $26.93 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link
- Manufacturer Note: RH/LH
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2024 Ford Mustang | Bullitt, Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Stabilizer Link, Rear Part Number: CR3Z-5C488-R
$28.28 MSRP: $44.91
You Save: $16.63 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: CR3Z-5C488-M, MEF-265, MEF-223, CR3Z-5C488-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Mustang | Base, Boss 302, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Stabilizer Link, Front Part Number: BR3Z-5K483-B
$49.95 MSRP: $82.18
You Save: $32.23 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link
- Position: Front
- Replaces: 4R3Z-5K483-AA, 6R3Z-5K483-A, 7R3Z-5K483-B, 8R3Z-5K483-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2014 Ford Mustang | Base, Boss 302, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Stabilizer Link, Front Part Number: 8R3Z-5K483-A
$49.95 MSRP: $82.18
You Save: $32.23 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Replaced by: BR3Z-5K483-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Ford Mustang | Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Mustang Stabilizer Link, Rear Part Number: CR3Z-5C488-Q
$62.49 MSRP: $104.91
You Save: $42.42 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: CR3Z-5C488-L, CR3Z-5C488-F, MEF-222, MEF-264
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Mustang | Base, Boss 302, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Stabilizer Link, Rear Part Number: CR3Z-5C488-S
$65.49 MSRP: $104.00
You Save: $38.51 (38%)
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link
- Position: Rear
- Replaces: CR3Z-5C488-N, MEF-266, MEF-224, CR3Z-5C488-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Mustang | Boss 302, Shelby GT500 | 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Link Part Number: CR3Z-5C488-P
$53.01 MSRP: $84.18
You Save: $31.17 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Replaces: CR3Z-5C488-K, CR3Z-5C488-C, MEF-226
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Mustang | Shelby GT500 | 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Stabilizer Link, Rear Part Number: CR3Z-5C488-J
$35.67 MSRP: $49.34
You Save: $13.67 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link
- Position: Rear
- Replaces: CR3Z-5C488-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2013 Ford Mustang | Boss 302 | 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Lateral Arm, Rear Part Number: F6ZZ-5K483-BA
Product Specifications
- Other Name: Link; Lateral Arm and Ball Joint Assembly, Rear; Lateral Link
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004, 2001, 1999 Ford Mustang | Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 8 Cyl 4.6 L GAS
View related parts
Ford Mustang Stabilizer Link, Rear Part Number: BR3Z-5C488-C
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Ford Mustang | Base, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Mustang Stabilizer Link, Rear Part Number: 7R3Z-5C488-A
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Mustang | Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Mustang Stabilizer Link, Rear Part Number: 5R3Z-5C488-BA
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2009 Ford Mustang | Base, GT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Mustang Stabilizer Link, Rear Part Number: XR3Z-5C486-BA
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: Cobra IRS
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2004 Ford Mustang | Base, GT, GT Bullitt, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Mustang Stabilizer Link, Front Part Number: 9U2Z-5A486-A
Product Specifications
- Other Name: Kit - Repair; Front Suspension Stabilizer Bar Link Kit.
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-2004 Ford Mustang | Base, GT, GT Bullitt, GTS, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Stabilizer Link, Rear Part Number: BR3Z-5C488-B
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link
- Position: Rear
- Replaces: AR3Z-5C488-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Ford Mustang | Base, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS

Ford Mustang Sway Bar Link

OEM Sway Bar Link boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Sway Bar Link with long life and a perfect fit. Come to our website and find genuine Ford Mustang parts. We keep a wide inventory of OEM Mustang parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Sway Bar Link in Ford Mustang cars are responsible for controlling body roll by linking the sway bar to the control arm during cornering. This linkage enable the sway bar to fend of movement on the inside tire while simultaneously compressing on the opposite side of the car thus improving weight distribution and therefore handling capability. Since the early models of Mustang, different forms of Sway Bar Link have been used in the car with each version having the aim of improving the suspension handling of the car. These links provide better couplings between the sway bar and the control arm and thus enabling better stabilization. These changes may be with regards to the engineering improvement of Sway Bar Link and with variations in mechanical performance of the car, part of Mustang's driving experience.

Ford Mustang Sway Bar Link Parts and Q&A

Stabilizer Link, Front
9U2Z-5A486-A
Q: How to service and repair the front sway bar link on Ford Mustang?
A:
Service and repair operations for the front sway bar link should begin by hoisting the vehicle through a lifting process. You should separate front sway bar links from the bar front by both removing bushings and nuts and discarding those nuts. Lift the sway bar until you can disconnect the links and proceed to remove the links by taking off the nuts and bushings. For installation, replace the components following the removal sequence using components with matching part numbers or equivalent parts since sway bar fasteners are essential for system and component performance. The precise retention of these parts depends on following all specified torque values during reassembly.
Lateral Arm, Rear
F6ZZ-5K483-BA
Q: How to Service and Repair the Rear Sway Bar Link on Ford Mustang?
A:
A hoist raises the vehicle first to begin service and repair processes on the rear sway bar link. The performance of vital systems heavily depends on suspension fasteners because their failure results in costly service expenses. Any fastener replacement requires using identical parts with matching original part numbers while the necessary substitutions require parts that are identical to the original finish and meet their corresponding property classes. Observation of specific torque values during reassembly will result in proper component retention. Prior to taking off the sway bar link nuts you need to loosen them first and then use the hex holding tool to stop the sway bar link ball joint from turning as you take out the nuts. Discard the nuts after removal. New nuts must be used for installation because the sway bar links feature torque prevailing nuts. First install the nuts until they become tight but afterward apply the hex holding feature to stop the ball joint movement before completing installation with a torque wrench and socket. Install the parts by using a method that is the opposite to the removal process.