How to Properly Install a Sway Bars on Ford Mustang?

Start sway bar link and kit service operations by placing the vehicle in neutral position on a hoist. The sway bar link bolts and clip nuts should be discarded before installation where the new bolts get tightened to 115 Nm (85 ft. lbs). The installer should first remove the sway bar bracket nuts and studs and brackets along with the sway bar before discarding the sway nuts and studs and tightening new ones to 70 Nm (52 ft. lbs). The professional should take out bushings and links from the sway bar if needed. The LH side tag on the sway bar must be placed properly to the left side of the vehicle during replacement installation. The installation of a new sway bar requires the use of the proper bar for convertible or coupe vehicles while maintaining the same tag color between the bar and the original component. The absence of a tag on an original sway bar will be compensated by examining link coatings for color identification where a black link calls for tag "A" yellow while white links require tag "B" in green and blue/gray links need tag "C" in orange. The final step for the installation will follow the steps of reinstallation.

How to Properly Service and Repair a Sway Bars on Ford Mustang?

Service work on sway bar links should only start when the vehicle sits at neutral position on a hoist. A holding feature should be used to maintain stability of the studs during sway bar link nut installation and removal because it helps keep the boot seal from twisting as the nuts get tightened. The installation of the sway bar link demands that you discard both lower nuts then tighten them to 115 Nm (85 ft. lbs). Proceed by disconnecting the sway bar links from the unit then remove the four sway bar bracket nuts followed by the sway bar brackets and bar before reinstalling it with 70 Nm (52 ft. lbs) torque. The procedure ends with reversing the steps of removal. Before final installation you can remove the sway bar bushings if needed. When fixing components it is essential to use new replacement parts with the same part number or equivalent. Inferior replacement parts will create notable service problems while following specified torque standards prevents component movement during reinstallation.

OEM Ford Mustang Sway Bars

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

40 Sway Bars found

View related parts
Ford Mustang Stabilizer Bar, Front Part Number: FR3Z-5482-A
$143.58 MSRP: $209.00
You Save: $65.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Mustang | EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Shelby GT350, Shelby GT350R, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Stabilizer Bar, Rear Part Number: FR3Z-5A772-E
$162.59 MSRP: $236.67
You Save: $74.08 (32%)
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025, 2015-2022 Ford Mustang | Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT Premium, Shelby GT350R, Shelby GT500 | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Stabilizer Bar Part Number: CR3Z-5A772-R
$172.55 MSRP: $251.17
You Save: $78.62 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Replaces: CR3Z-5A772-N, CR3Z-5A772-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Mustang | Base, Boss 302, GT, Shelby GT500 | 3.7L V6, 4.6L V8, 5.0L V8, 5.4L V8, 5.8L V8, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Stabilizer Bar Part Number: CR3Z-5A772-Q
$176.33 MSRP: $256.67
You Save: $80.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Replaces: CR3Z-5A772-M, CR3Z-5A772-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Mustang | Base, Boss 302, GT, Shelby GT500, Shelby Version | 3.7L V6, 4.6L V8, 5.0L V8, 5.4L V8, 5.8L V8, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Stabilizer Bar Part Number: CR3Z-5A772-S
$178.85 MSRP: $260.33
You Save: $81.48 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Replaces: CR3Z-5A772-K, CR3Z-5A772-P
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Mustang | Base, Boss 302, GT, Shelby GT500, Shelby Version | 3.7L V6, 4.6L V8, 5.0L V8, 5.4L V8, 5.8L V8, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Stabilizer Bar, Front Part Number: FR3Z-5482-B
$254.24 MSRP: $373.33
You Save: $119.09 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: With Insulator
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2025 Ford Mustang | Bullitt, Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Stabilizer Bar Bushing, Rear Part Number: F2GZ-5493-C
$20.81 MSRP: $29.52
You Save: $8.71 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing
- Position: Rear
- Replaces: FR3Z-5493-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025, 2015-2022 Ford Mustang | Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT Premium, Shelby GT350, Shelby GT350R, Shelby GT500 | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Stabilizer Bar, Rear Part Number: FR3Z-5A772-A
$103.53 MSRP: $150.70
You Save: $47.17 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2025 Ford Mustang | Bullitt, Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Stabilizer Bar, Rear Part Number: FR3Z-5A772-B
$116.25 MSRP: $169.22
You Save: $52.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2025 Ford Mustang | Bullitt, Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Stabilizer Bar, Rear Part Number: FR3Z-5A772-C
$130.53 MSRP: $190.00
You Save: $59.47 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: FR3Z-5A772-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2023 Ford Mustang | Bullitt, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Stabilizer Bar, Rear Part Number: JR3Z-5A772-A
$132.25 MSRP: $192.50
You Save: $60.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024-2025 Ford Mustang | Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT Premium | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Stabilizer Bar, Front Part Number: CR3Z-5A772-T
$145.42 MSRP: $211.67
You Save: $66.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Sway Bar
- Position: Front
- Replaces: CR3Z-5A772-H, CR3Z-5A772-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Mustang | Base, GT, Shelby GT500, Shelby Version | 3.7L V6, 4.6L V8, 5.0L V8, 5.4L V8, 5.8L V8, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Stabilizer Bar, Rear Part Number: FR3Z-5A772-G
$152.29 MSRP: $221.67
You Save: $69.38 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2022 Ford Mustang | Shelby GT350, Shelby GT500 | 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Stabilizer Bar, Front Part Number: FR3Z-5482-J
$160.30 MSRP: $233.33
You Save: $73.03 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: FR3Z-5482-K, FR3Z-5482-G, FR3Z-5482-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2022 Ford Mustang | Shelby GT350, Shelby GT350R, Shelby GT500 | 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Stabilizer Bar, Front Part Number: JR3Z-5482-B
$220.19 MSRP: $323.33
You Save: $103.14 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2025 Ford Mustang | Bullitt, Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500 | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Stabilizer Bar Part Number: XR3Z-5482-EA
Product Specifications
- Other Name: Bar - Stabilizer; Sway Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2004 Ford Mustang | GT | 8 Cyl 4.6 L GAS
View related parts
Ford Mustang Stabilizer Bar, Front Part Number: BR3Z-5482-A
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: Service Part May Differ From Production
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford Mustang | Base, Boss 302, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Stabilizer Bar, Front Part Number: 7R3Z-5482-A
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 7R3Z-5482-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Mustang | Shelby GT500, Shelby GT500KR | 8 Cyl 5.4 L GAS
View related parts
Ford Mustang Stabilizer Bar Part Number: 6R3Z-5A772-A
Product Specifications
- Other Name: Bar - Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Ford Mustang | Base, GT, Shelby GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Mustang Stabilizer Bar, Front Part Number: 6R3Z-5482-B
Product Specifications
- Other Name: Bar Assembly - Roll; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 4R3Z-5482-BA, 7R3Z-5482-B, AR3Z-5482-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2009 Ford Mustang | Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR, Shelby Version | 4.6L V8, 5.4L V8, 5.8L V8, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

| Page 1 of 2 |Next >

1-20 of 40 Results

Ford Mustang Sway Bars

OEM Sway Bars boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Sway Bars with long life and a perfect fit. Come to our website and find genuine Ford Mustang parts. We keep a wide inventory of OEM Mustang parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Mustang Sway Bars connect the left and right suspension together using a torsion spring that limits body roll in corners and over bumps. The bars prevent body roll when the wheels move at different rates which helps keep the car flatter and maintain grip to influence understeer or oversteer. These Sway Bars, although made of durable metal, are susceptible to bending from collision as well as rust. Deterioration frequently happens in the rubber or polyurethane bushings and end links that secure the Sway Bars resulting in clunks, excessive lean, and vague steering. When inspecting a suspension instrument or a suspension component with the suspension loaded and unloaded, cracked bushings, elongated holes or a loose ball-socket link is visible, and, if so, replacement is indicated. Included parts are complete Sway Bars, stand-alone bushings, and end link repair kits that supply new bushings, and metal retainers. Replacement of worn pieces is essential for keeping Ford handling consistent to reproduce the characteristics Ford built into the Mustang chassis. The sound Sway Bars engulf the Ford driver of a Mustang that corners with less roll, and gives predictable responses. Frequent inspections help keep every Mustang stable and assured.

Ford Mustang Sway Bars Parts and Q&A

Stabilizer Bar, Front
6R3Z-5482-B
Q: How to Properly Install a Sway Bars on Ford Mustang?
A:
Start Sway Bar Link and kit service operations by placing the vehicle in neutral position on a hoist. The sway bar link bolts and clip nuts should be discarded before installation where the new bolts get tightened to 115 Nm (85 ft. lbs). The installer should first remove the sway bar bracket nuts and studs and brackets along with the sway bar before discarding the sway nuts and studs and tightening new ones to 70 Nm (52 ft. lbs). The professional should take out bushings and links from the sway bar if needed. The LH side tag on the sway bar must be placed properly to the left side of the vehicle during replacement installation. The installation of a new sway bar requires the use of the proper bar for convertible or coupe vehicles while maintaining the same tag color between the bar and the original component. The absence of a tag on an original sway bar will be compensated by examining link coatings for color identification where a black link calls for tag "A" yellow while white links require tag "B" in green and blue/gray links need tag "C" in orange. The final step for the installation will follow the steps of reinstallation.
Stabilizer Bar
6R3Z-5A772-A
Q: How to Properly Service and Repair a Sway Bars on Ford Mustang?
A:
Service work on Sway Bar Links should only start when the vehicle sits at neutral position on a hoist. A holding feature should be used to maintain stability of the studs during sway bar link nut installation and removal because it helps keep the boot seal from twisting as the nuts get tightened. The installation of the sway bar link demands that you discard both lower nuts then tighten them to 115 Nm (85 ft. lbs). Proceed by disconnecting the sway bar links from the unit then remove the four sway bar bracket nuts followed by the sway bar brackets and bar before reinstalling it with 70 Nm (52 ft. lbs) torque. The procedure ends with reversing the steps of removal. Before final installation you can remove the Sway Bar Bushings if needed. When fixing components it is essential to use new replacement parts with the same part number or equivalent. Inferior replacement parts will create notable service problems while following specified torque standards prevents component movement during reinstallation.