How to repair a rear bumper cover on Ford Ranger?

Begin rear bumper cover repair by examining it for restorability to exceed essential quality requirements and match while checking to see if repair costs surpass buying a new one. The damaged bumper requires bumper removal before cleaning its broken tabs with a plastics wax and grease remover. Begin by sanding the damaged portion with a hand using 80-grit sandpaper followed by cleaning it with compressed air to remove all residue. You should use the plastic adhesion promoter following the manufacturer's instructions for application. Cut a fiberglass cloth or equivalent material into a size big enough for the front tab formation while maintaining the appropriate wedge slope that matches the original tab dimensions at 51 mm (2 in). Use manufacturer instructions to prepare the repair cloth before applying it to the damaged region with the plastic material patch forming the tab shape. Shape the repair tab after its complete curing time using a small angle sander without allowing exposure of the exterior surface. After installing the bumper cover you must apply Ford-approved paint systems to perform any essential repairs before ending the procedure.

How to remove and replace the front bumper cover on Ford Ranger?

You must detach the front bumper assembly first before starting work on the front bumper cover removal. The process begins with unclipping the lower bumper cover from its fasteners which secure it to the upper bumper cover. Move fog lamp assemblies from the old lower cover when needed. The inspectable 14 plastic rivets need removal in order to detach the bumper cover from the bumper beam. The installation of new covers requires doing the removal procedure in reverse order.

OEM Ford Ranger Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

28 Bumpers found

View related parts
Ford Ranger Upper Cover, Front Part Number: 1L5Z-17757-BA
$249.22 MSRP: $365.97
You Save: $116.75 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper; Bumper Face Bar, Front, Front Upper
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Ranger | Edge, FX4, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Bumper, Front Part Number: KB3Z-17757-AAPTM
$951.27 MSRP: $1056.96
You Save: $105.69 (10%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Manufacturer Note: Prime - Paint To Match
- Position: Front
- Replaced by: LB3Z-17757-AAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Ranger | XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Bumper, Front Part Number: LB3Z-17757-AAPTM
$951.27 MSRP: $1056.96
You Save: $105.69 (10%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front
- Position: Front
- Replaces: KB3Z-17757-AAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Bumper Assembly, Rear Part Number: KB3Z-17906-BCPTM
$999.81 MSRP: $1110.90
You Save: $111.09 (10%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Corner Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | XL | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Upper Cover, Front Part Number: 1L5Z-17757-JA
$222.08 MSRP: $304.69
You Save: $82.61 (28%)
ADD TO CART
Product Specifications
- Other Name: Bumper; Bumper Face Bar, Front, Front Upper
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Ranger | Edge, FX4, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Bumper Assembly, Rear Part Number: 4L5Z-17906-DA
$735.54 MSRP: $1089.68
You Save: $354.14 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Ranger | Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Bumper, Front Part Number: LB3Z-17757-B
$775.75 MSRP: $1231.35
You Save: $455.60 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front
- Position: Front
- Replaces: KB3Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford Ranger | XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Bumper Cover, Front Part Number: 6L5Z-17D957-BAPTM
$154.01 MSRP: $224.18
You Save: $70.17 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Ranger | FX4, Sport, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Bumper Assembly, Rear Part Number: 4L5Z-17906-AA
$556.14 MSRP: $693.53
You Save: $137.39 (20%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Ranger | Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Bumper Assembly, Rear Part Number: KB3Z-17906-ADPTM
$968.51 MSRP: $1152.99
You Save: $184.48 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Corner Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Upper Cover, Front Part Number: 1L5Z-17757-HA
Product Specifications
- Other Name: Bumper; Bumper Face Bar, Front, Front Upper
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2007 Ford Ranger | Edge, FX4, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Upper Cover, Front Part Number: 1L5Z-17757-CA
$289.66 MSRP: $425.35
You Save: $135.69 (32%)
Product Specifications
- Other Name: Bumper; Bumper Face Bar, Front, Front Upper
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Ranger | Edge, FX4, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Bumper Part Number: F57Z-17757-AA
Product Specifications
- Manufacturer Note: Chrome - bar only - single hole in center, order rub strip separately
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1997 Ford Ranger | Splash, Sport, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Bumper, Front Part Number: F87Z-17757-BA
Product Specifications
- Other Name: Bumper Face Bar, Front
- Manufacturer Note: Chrome - bar only
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998 Ford Ranger | Splash, XL, XLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Bumper, Front Part Number: XL5Z-17757-APTM
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Replaces: XL5Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Ford Ranger | XL, XLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Bumper, Front Part Number: XL5Z-17757-BA
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Manufacturer Note: Chrome - bar only
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Ford Ranger | XL, XLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Face Bar, Black, Front Part Number: YL2Z17757ABA
Product Specifications
- Other Name: Bumper Assembly - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992 Ford Ranger | Custom, S, Sport, STX, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Bumper, Front Part Number: YL2Z-17757-CAB
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Primed paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1997 Ford Ranger | Splash, Sport, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Bumper, Front Part Number: YL5Z-17757-AAA
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Manufacturer Note: Primed,paint to match , Splash
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998 Ford Ranger | Splash, XL, XLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Bumper Assembly, Rear Part Number: YL5Z-17906-HA
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: F67Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2005 Ford Ranger | Edge, FX4, Splash, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

| Page 1 of 2 |Next >

1-20 of 28 Results

Ford Ranger Bumper

OEM Bumper boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper with long life and a perfect fit. Come to our website and find genuine Ford Ranger parts. We keep a wide inventory of OEM Ranger parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Ranger Bumper Parts and Q&A

Bumper Assembly, Rear
4L5Z-17906-DA
Q: How to repair a rear bumper cover on Ford Ranger?
A:
Begin rear bumper cover repair by examining it for restorability to exceed essential quality requirements and match while checking to see if repair costs surpass buying a new one. The damaged bumper requires bumper removal before cleaning its broken tabs with a plastics wax and grease remover. Begin by sanding the damaged portion with a hand using 80-grit sandpaper followed by cleaning it with compressed air to remove all residue. You should use the plastic adhesion promoter following the manufacturer's instructions for application. Cut a fiberglass cloth or equivalent material into a size big enough for the front tab formation while maintaining the appropriate wedge slope that matches the original tab dimensions at 51 mm (2 in). Use manufacturer instructions to prepare the repair cloth before applying it to the damaged region with the plastic material patch forming the tab shape. Shape the repair tab after its complete curing time using a small angle sander without allowing exposure of the exterior surface. After installing the bumper cover you must apply Ford-approved paint systems to perform any essential repairs before ending the procedure.
Bumper Cover, Black, Front
6L5Z-17D957-AAA
Q: How to remove and replace the front bumper cover on Ford Ranger?
A:
You must detach the front bumper assembly first before starting work on the front bumper cover removal. The process begins with unclipping the lower bumper cover from its fasteners which secure it to the upper bumper cover. Move fog lamp assemblies from the old lower cover when needed. The inspectable 14 plastic rivets need removal in order to detach the bumper cover from the bumper beam. The installation of new covers requires doing the removal procedure in reverse order.