Other Name: Motor And Fan Assembly - Engine Cooling; Dual Radiator and Condenser Fan Assembly; Fan Blade; Fan Assembly; Cooling Fan Assembly; Cooling Fan
Manufacturer Note: Relay Serviced In -15604-
Replaces: DG1Z-8C607-D, RF-281
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Other Name: Fan and Motor Assembly; Dual Radiator and Condenser Fan; Engine Cooling Fan; Radiator Fan; Cooling Fan; Fan Blade; Motor; Fan & Motor; Fan Assembly; Blade; Shroud
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1990-1995 Ford Taurus | GL, L, LX, SE | 6 Cyl 3.8 L GAS
Other Name: Fan Motor Assembly; Radiator Fan Assembly; Fan Motor; Motor; Motor Assembly
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1986-1993 Ford Taurus | GL, L, LX, MT5, SHO | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
Ford Taurus Fan Motor
Welcome to our website where you can discover high-quality, genuine Ford Taurus Fan Motor. We offer an extensive inventory of OEM Ford Taurus Fan Motor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to service the radiator cooling fan motor on Ford Taurus?
A: Begin with emptying the engine cooling system so that you can repair the radiator cooling fan motor. Then, take away and place aside the distribution box. Unplug the electrical connector of the fan and take the bolt keeping the cooling fan fixed. In order to complete the installation, it is just enough to make the steps of removal reverse.
Q: How to service the radiator cooling fan motor and shroud on Ford Taurus?
A: To service the motor and shroud of the radiator cooling fan raise the vehicle in neutral. The air cleaner assembly, the fan motor connector, and the wiring harness should be removed. Take off the upper Radiator Hose and support, the fan motor and shroud bolts. Installation repeat the reversal sequence, tightening of bolts 6 Nm (53 lb-in).