How to Service and Repair the Power Steering Hose from Pump to Steering Gear on Ford Taurus?

The first step for servicing the power steering pump to steering gear pressure line includes protecting the system components from foreign materials while also blocking power steering fluid contact with the engine accessory drive belt to stop belt failure. The service begins with removing the power steering pump then proceeding with disassembling the power steering pressure line bracket-to-rear engine bolt and tightening it to 10 Nm (89 lb-inch) for reassembly. The process continues with power steering pressure switch electrical connector removal from power steering pressure line followed by removing power steering pressure line bracket-to-valve cover stud nut before tightening it to 10 Nm (89 lb-inch) at installation. The power steering pressure line bracket must be detached from the steering gear bolt before its reinstallation while applying torque to 25 Nm (18 lb-ft). Security requires removing the clamp plate bolt from power steering line and rotating the clamp plate while disconnecting the pressure line from the steering gear before reinstalling it with proper torque to 25 Nm (18 lb-ft). Eliminate the equipment according to installation protocols to finalize the work.

OEM Ford Taurus Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

38 Power Steering Hoses found

View related parts
Ford Taurus Power Steering Return Hose Part Number: AA5Z-3A713-C
$46.86 MSRP: $63.76
You Save: $16.90 (27%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Return Hose; Upper Return Hose
- Replaces: AA5Z-3A713-B, AA8Z-3A713-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Power Steering Return Hose Part Number: 8G1Z-3A713-C
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Return Hose; Lower Return Hose; Upper Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Power Steering Return Hose Part Number: YF1Z-3A713-CA
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Upper Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Taurus | LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Connector Tube, Upper Part Number: 5F9Z-3A719-B
Product Specifications
- Other Name: Hose Assembly; Power Steering Return Line End Fitting; Power Steering Pressure Hose, Upper; Power Steering Hose; Upper Hose; Upper Pipe
- Position: Upper
- Replaces: 7F9Z-3A719-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Reservoir Hose Part Number: 1F1Z-3691-AA
Product Specifications
- Other Name: Hose Assembly - Reservoir To Pump; Power Steering Reservoir Hose; Power Steering Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Taurus | SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Power Steering Pressure Hose Part Number: 1F1Z-3A719-AB
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001 Ford Taurus | LX, SE, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Power Steering Return Hose Part Number: 3F1Z-3A713-AA
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Lower Return Hose; Upper Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Taurus | LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Power Steering Return Hose Part Number: AA5Z-3A713-D
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Return Hose; Upper Return Hose
- Replaces: AA5Z-3A713-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Power Steering Return Hose Part Number: AG1Z-3A713-D
Product Specifications
- Other Name: Hose Assembly - Gear To Reservoir; Power Steering Hose; Lower Return Tube; Upper Return Hose
- Replaces: 9G1Z-3A713-B, 8G1Z-3A713-F, AG1Z-3A713-A, 8G1Z-3A713-E, PSH-285
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Power Steering Pressure Hose Part Number: E9DZ3A719B
Product Specifications
- Other Name: Hose Assembly - Power Steering Pressure; Power Steering Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1990 Ford Taurus | GL, L, LX, MT5 | 4 Cyl 2.5 L GAS
View related parts
Ford Taurus Pressure Line Part Number: F3DZ-3A714-A
Product Specifications
- Other Name: Tube - Connecting; Power Steering Hose; Tube
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1995 Ford Taurus | GL, LX, SE, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Pressure Line Part Number: F3DZ-3A717-A
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Tube
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1995 Ford Taurus | GL, LX, SE, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Power Steering Return Hose Part Number: F4DZ3A713B
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Ford Taurus | GL, LX, SE | 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Power Steering Return Hose Part Number: F4DZ3A713D
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose; Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Ford Taurus | GL, LX, SE, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Power Steering Pressure Hose Part Number: F4DZ3A719A
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Ford Taurus | GL, LX, SE, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Power Steering Return Hose Part Number: F6DZ-3A713-A
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Upper Return Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford Taurus | G, GL, LX, SE, SE Comfort | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Power Steering Pressure Hose Part Number: F6DZ-3A719-A
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1998 Ford Taurus | LX, SE Comfort | 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Power Steering Pressure Hose Part Number: F6DZ3A719B
Product Specifications
- Other Name: Hose Assembly; Power Steering Hose; Pressure Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford Taurus | SHO | 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Upper Return Hose Part Number: F8DZ-3A713-BB
Product Specifications
- Other Name: Tube Assembly; Power Steering Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford Taurus | LX, SE, SE Comfort | 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Power Steering Pressure Hose Part Number: FODZ-3A719-F
Product Specifications
- Other Name: Hose Assembly - Pump To Steering; Power Steering Hose; Pressure Hose; Hose Assembly - Pump To Steering Gear
- Manufacturer Note: Hose asy, pressure. Has the hole for the F3TZ-3N824-A pressure switch., without VAPS
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1993 Ford Taurus | GL, L, LX, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 38 Results

Ford Taurus Power Steering Hose

OEM Power Steering Hose boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Power Steering Hose with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Taurus Power Steering Hose is an important part that plays a role in smooth working of the steering system in different models of Ford Taurus. This is the most basic hydraulic hose which links the power steering gear to the steering pump for the transfer of hydraulic fluid that is required for assisted steering. The Ford Taurus Power Steering Hose is built from reinforced rubber to endure high pressure to convey the power steering fluid from the engine driven power steering pump to the steering gear; a return hose is also present to take the power steering fluid back to the reservoir. Some changes made to the hose design include the use of rubber hoses and assembly with pre-bend metal tubing to meet the requirement of other models of Taurus. Besides its obvious utilization, the Ford Taurus Power Steering Hose has other meanings in the improvement of operating performance and safety by creating precise control of the car's direction. Problems like leakage which may results from either the ageing process or wear and tear are usually manifested through a change in the level of steering effort as well as the level of noise in the automotive system hence the importance of the Power Steering Hose. Some of the characteristics of the application include the high pressure fittings and the low pressure return that are incorporated in the Ford Taurus Power Steering Hose in the car to improve on the performance and reliability of the car to the driver. All in all, the Ford Taurus Power Steering Hose is one of the good products created by Ford which ans for quality and innovation in their car production, and is one of the important components that can improve the driving experience of the Ford Taurus.

Ford Taurus Power Steering Hose Parts and Q&A

Reservoir Hose
9G1Z-3691-A
Q: How to Service and Repair the Power Steering Hose from Pump to Steering Gear on Ford Taurus?
A:
The first step for servicing the Power Steering Pump to steering gear pressure line includes protecting the system components from foreign materials while also blocking power steering fluid contact with the engine accessory drive belt to stop belt failure. The service begins with removing the power steering pump then proceeding with disassembling the power steering pressure line bracket-to-rear engine bolt and tightening it to 10 Nm (89 lb-inch) for reassembly. The process continues with power steering pressure switch electrical connector removal from power steering pressure line followed by removing power steering pressure line bracket-to-valve cover stud nut before tightening it to 10 Nm (89 lb-inch) at installation. The power steering pressure line bracket must be detached from the steering gear bolt before its reinstallation while applying torque to 25 Nm (18 lb-ft). Security requires removing the clamp plate bolt from power steering line and rotating the clamp plate while disconnecting the pressure line from the steering gear before reinstalling it with proper torque to 25 Nm (18 lb-ft). Eliminate the equipment according to installation protocols to finalize the work.