How to Service and Repair the Shift Knob on a Transmission Control (TC) Switch on Ford Taurus X?

The first step in repairing shift knobs of vehicles that have a transmission control (TC) switch requires removal of the shift bezel trim ring. You need to raise the armrest first before removing the upper console panel. The shift knob bezel at the bottom should be slid down while you remove its two fixing screws. Any vehicle without a transmission control switch needs only the removal of the shift knob. The process to access the TC switch electrical connector requires releasing four tabs in vehicles that have this switch before setting aside the shift bezel. The first step includes disconnecting the TC switch electrical connector while threading the wiring harness through the shift bezel, then you can remove the shift knob and its bezel. The TC switch wiring harness must traverse through the shift bezel before connecting its electrical connector, which should have its four tabs properly secured. Position the shift knob, after which install the knob bezel while placing the screws accordingly. The technical procedure demands users to position the lower shift knob bezel into its slot before securing it into place, then reinstall the upper console panel with the shift bezel trim ring.

OEM Ford Taurus X Shift Knob

Gear Shift Knobs

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Shift Knobs found

View related parts
Ford Taurus X Shift Knob Part Number: 8G1Z-7213-A
$156.18 MSRP: $227.33
You Save: $71.15 (32%)
ADD TO CART
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus X Shift Knob Part Number: 8G1Z-7213-CA
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Shift Lever Knob; Automatic Transmission Selector Handle
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS

Ford Taurus X Shift Knob

OEM Shift Knob boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Shift Knob with long life and a perfect fit. Come to our website and find genuine Ford Taurus X parts. We keep a wide inventory of OEM Taurus X parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Taurus X Shift Knob is an important car part that defines the main strength, durability and effectiveness that one associates with a car from Ford. Designated to be the main means of the car's operation and shift, Taurus X Shift Knob also contributes to the reliability of the vehicle during its operation. Offering perfect fit for Taurus X of 2008 and 2009, this Shift Knob is scarcely customizable as it contains a shift pattern diagram to assist the driver in switching the gears. The Taurus X Shift Knob comes in a number of designs and there are weighted versions that boost performance due to the extra weight to provide momentum when shifting, thus minimizing shift time and improving handling control. The Ford Taurus X Shift Knob is made out of a variety of material that include plastics and the high end sleek finishes to provide comfort while handling while at the same time serving its purpose. These ergonomic characteristics do not only serve to enhance the motility aspects of the Ford Taurus X, but also help to justify its image as a highly reliable vehicle. Also, the Shift Knob enhances the looks of the interior of the vehicle making it a unique model on the automotive market. For many drivers, performance is important as safety and style, and undoubtedly the Shift Knob of Ford Taurus X involves in this model connects the driver with such characteristics for the Ford Taurus X.

Ford Taurus X Shift Knob Parts and Q&A

Shift Knob
8G1Z-7213-CA
Q: How to Service and Repair the Shift Knob on a Transmission Control (TC) Switch on Ford Taurus X?
A:
The first step in repairing shift knobs of vehicles that have a transmission control (TC) switch requires removal of the shift bezel trim ring. You need to raise the armrest first before removing the upper console panel. The shift knob bezel at the bottom should be slid down while you remove its two fixing screws. Any vehicle without a transmission control switch needs only the removal of the shift knob. The process to access the TC switch electrical connector requires releasing four tabs in vehicles that have this switch before setting aside the shift bezel. The first step includes disconnecting the TC switch electrical connector while threading the wiring harness through the shift bezel, then you can remove the shift knob and its bezel. The TC switch wiring harness must traverse through the shift bezel before connecting its electrical connector, which should have its four tabs properly secured. Position the shift knob, after which install the knob bezel while placing the screws accordingly. The technical procedure demands users to position the lower shift knob bezel into its slot before securing it into place, then reinstall the upper console panel with the shift bezel trim ring.