How to service the rear ABS sensor on Ford Thunderbird?

In order to service the rear ABS sensor, place the car under neutral by use of a hoist. Unfit the electrical connector of the ABS sensor, clean the area and loosen the sensor bolt (tightening the sensor bolt to 11 Nm when refitting). To remove, pull off the harness retainer, sensor and harness assembly and do the same to reinstall.

How to service the front ABS sensor on Ford Thunderbird?

In order to service front ABS sensor make sure the vehicle remains in neutral position using the hoist. Unscrew the ABS sensor bolt, change the O-ring and remove the harness retainers. Unscrew the electrical connector, put the sealant onto the new sensor, and reassemble by reversing the steps of disassembly.

OEM Ford Thunderbird ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Sensors found

View related parts
Ford Thunderbird ABS Sensor, Front Driver Side Part Number: 3W4Z-2C204-AA
$37.40 MSRP: $61.09
You Save: $23.69 (39%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; Front Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Snap On Type
- Position: Front Driver Side
- Replaces: YW4Z-2C204-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Thunderbird | 50th Anniversary Edition, Base, James Bond Edition, Neiman Marcus, Pacific Coast Roadster | 8 Cyl 3.9 L GAS
View related parts
Ford Thunderbird ABS Sensor, Passenger Side Part Number: F6SZ-2C204-AB
Product Specifications
- Other Name: Sensor Assembly; Speed Sensor; Front Speed Sensor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1997 Ford Thunderbird | LX, Super Coupe | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Thunderbird ABS Sensor, Rear Passenger Side Part Number: 3W4Z-2C190-BA
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Right; Rear Speed Sensor
- Position: Rear Passenger Side
- Replaces: XW4Z-2C190-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2005 Ford Thunderbird | 50th Anniversary Edition, Base, James Bond Edition, Neiman Marcus, Pacific Coast Roadster | 8 Cyl 3.9 L GAS
View related parts
Ford Thunderbird ABS Sensor, Driver Side Part Number: F3LY-2C204-BA
Product Specifications
- Other Name: Sensor Assembly; Speed Sensor; Front Speed Sensor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1997 Ford Thunderbird | LX, Super Coupe | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS

Ford Thunderbird ABS Sensor

Welcome to our website where you can discover high-quality, genuine Ford Thunderbird ABS Sensor. We offer an extensive inventory of OEM Ford Thunderbird ABS Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Thunderbird ABS Sensor Parts and Q&A

ABS Sensor, Rear Passenger Side
3W4Z-2C190-BA
Q: How to service the rear ABS sensor on Ford Thunderbird?
A: In order to service the rear ABS sensor, place the car under neutral by use of a hoist. Unfit the electrical connector of the ABS sensor, clean the area and loosen the sensor bolt (tightening the sensor bolt to 11 Nm when refitting). To remove, pull off the harness retainer, sensor and harness assembly and do the same to reinstall.
ABS Sensor, Front Driver Side
3W4Z-2C204-AA
Q: How to service the front ABS sensor on Ford Thunderbird?
A: In order to service front ABS sensor make sure the vehicle remains in neutral position using the hoist. Unscrew the ABS sensor bolt, change the O-ring and remove the harness retainers. Unscrew the electrical connector, put the sealant onto the new sensor, and reassemble by reversing the steps of disassembly.