FordParts
My Garage
My Account
Cart
OEM Ford Thunderbird Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Battery Cables found
Ford Thunderbird Negative Cable
Part Number: E7SZ-14301-A$35.24 MSRP: $55.00You Save: $19.76 (36%)Ships in 1-3 Business Days
Ford Thunderbird Positive Cable
Part Number: F5SZ14300B
Ford Thunderbird Negative Cable
Part Number: F4SZ14301A
Ford Thunderbird Positive Cable
Part Number: E3SZ-14300-A
Ford Thunderbird Positive Cable
Part Number: D1PZ-14300-E
Ford Thunderbird Negative Cable
Part Number: 1W6Z-14301-AA
Ford Thunderbird Positive Cable
Part Number: 1W6Z-14300-AA
Ford Thunderbird Battery Cable
Welcome to our website where you can discover high-quality, genuine Ford Thunderbird Battery Cable. We offer an extensive inventory of OEM Ford Thunderbird Battery Cable at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford Thunderbird Battery Cable Parts Questions & Experts Answers
- Q: How to service and repair the battery cables on Ford Thunderbird?A: Disconnection of the battery marks the starting point for fixing battery cables. Service technicians should remove the ground cable bolt and both ground cable locators before taking off the ground cable. Afterwards, reattach the bolt with a torque setting of 12 Nm (9 lb-ft). To install the rear positive battery cable you should remove the rear BJB cable assembly nut and cable end while tightening the nut to 12 Nm (9 lb-ft). Position the positive battery cable in an accessible slot of the luggage compartment after releasing it from the two conduit locations and two package tray locations. To remove the bulkhead positive battery cable in the engine compartment start by unscrewing the nut cover followed by disconnecting the bulkhead positive battery cable nut and cable end while tightening it to 12 Nm (9 lb-ft) tension. Separate the electrical connector and unscrew the body ground cable bolt then place the body ground cable lead to the side before tightening the bolt to 12 Nm (9 lb-ft) when reinstalling. The process of harness bracket removal requires two screws to be loose and replacement includes tightening them to 6 Nm (53 lb-in). Start with vacuuming both the starter ground cable nut and end then secure the nut with 25 Nm (18 lb-ft) torque before proceeding to vacuum the starter solenoid positive cable nut and end, requiring 12 Nm (9 lb-ft) torque. Loosen the starter solenoid wire cable nut and end before tightening the connection to 6 Nm (53 lb-in). After that, remove the generator B+ cable harness locator along with the generator itself. First position the generator B+ cover aside then remove the generator B+ cable nut and end. During installation tighten the nut to 8 Nm (71 lb-in). Complete the removal process by following the reverse installation steps after taking off both the engine compartment positive and ground cable assembly.
