How to service and repair the front rack and pinion steering gear on Ford Thunderbird?

A suitable steering wheel holding device should maintain the straight-ahead position to keep the Clock Spring safe because it must stay stationary when detaching the intermediate shaft. Position the vehicle with NEUTRAL gear selection on a hoist. The specified order requires component removal while utilizing the hex holding feature to stop the stud from rotating when unscrewing tie-rod end nuts. Proceed with the reverse order to install all components when the installation process is finished. After installation, you should test the rack and pinion system for leaks and fill it before performing a purge step, then checking and adjusting alignment as needed.

OEM Ford Thunderbird Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Rack And Pinions found

View related parts
Ford Thunderbird Steering Gear
Part Number: 1W6Z-3504-AARM
$476.54 MSRP: $756.65
You Save: $280.11 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Remanufactured Rack - Steering Gear; Rack and Pinion Assembly; Steering Gearbox; Gear Assembly; Rack - Steering Gear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford Thunderbird | Base, Neiman Marcus | 8 Cyl 3.9 L GAS
View related parts
Ford Thunderbird Steering Gear
Part Number: 5W6Z-3504-A
$1410.45 MSRP: $2272.73
You Save: $862.28 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly - Steering; Rack and Pinion Assembly; Steering Gearbox; Gear Assembly
- Manufacturer Note: Original Equipment Manufacturer
- Replaces: 4W6Z-3504-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Thunderbird | 50th Anniversary Edition, Base, James Bond Edition, Pacific Coast Roadster | 8 Cyl 3.9 L GAS
View related parts
Ford Thunderbird Steering Gear
Part Number: F6SZ-3504-ACRM
Product Specifications
- Other Name: Remanufactured Gear Assembly - Steering; Steering Gearbox; Gear Assembly; Gear Assembly - Steering
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1997 Ford Thunderbird | Base, LX, Super Coupe | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Thunderbird Sector Shaft
Part Number: E5DZ3575B
Product Specifications
- Other Name: Steering Gear & Linkage; Steering Gearbox; Steering Rack; Rack Assembly; Rack; Rack - Steering Gear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1988 Ford Thunderbird | Base, Elan, Fila, LX, Sport, Turbo | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Thunderbird Sector Shaft
Part Number: E5DZ3575A
Product Specifications
- Other Name: Rack - Steering Gear; Steering Gearbox; Steering Rack; Rack Assembly; Rack
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1988 Ford Thunderbird | Base, Elan, Fila, LX, Sport, Turbo | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS

Ford Thunderbird Rack And Pinion

Welcome to our website where you can discover high-quality, genuine Ford Thunderbird Rack And Pinion. We offer an extensive inventory of OEM Ford Thunderbird Rack And Pinion at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Thunderbird Rack And Pinion Parts Questions & Experts Answers

Steering Gear
5W6Z-3504-A
Q: How to service and repair the front rack and pinion steering gear on Ford Thunderbird?
A: A suitable Steering Wheel holding device should maintain the straight-ahead position to keep the Clock Spring safe because it must stay stationary when detaching the intermediate shaft. Position the vehicle with NEUTRAL gear selection on a hoist. The specified order requires component removal while utilizing the hex holding feature to stop the stud from rotating when unscrewing tie-rod end nuts. Proceed with the reverse order to install all components when the installation process is finished. After installation, you should test the rack and pinion system for leaks and fill it before performing a purge step, then checking and adjusting alignment as needed.