Other Name: Bolt And Washer Assembly - Hex Head; Axle Hub Mounting Bolt; Suspension Knuckle Bolt; Wheel Hub Kit; Hub Assembly Bolt; Hub Assembly Mount Bolt; Hub Mount Bolt; Washer
Manufacturer Note: M12 X 1.5 X 58
Position: Front
Replaces: -W715985-S439
Fits the following Ford Models:
Edge | 2015-2024 | SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
Fusion | 2013-2020 | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
Mustang | 2015-2024 | Bullitt, Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
Mustang Mach-E | 2021-2023 | California Route 1, First Edition, GT, Premium, Select | BATTERY EV (EV/BEV)
Police Responder Hybrid | 2019-2020 | Base | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV)
SSV Plug-In Hybrid | 2019-2020 | Base | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to service and repair the Wheel Studs for single rear wheel on Ford E-150?
A: In order to service the wheel fasteners of a single rear wheel vehicle one must begin by removing the brake disc and hub. Following that, an appropriate press will be used to take out the wheel stud of the brake disc and hub. The installation can be made by reversing the process undertaken during the removal.
Q: How to Service the Wheel Studs for Single Rear Wheel Configurations on Ford F-350 Super Duty?
A: To service single rear wheel fasteners, remove the wheel hub and brake disc assembly. Use a press to discard the old wheel stud, then align and install the new stud in the hub and disc assembly. Finally, press the new stud in and reattach the assembly.