Other Name: Seat Belt Assembly; Outer Belt Assembly
Manufacturer Note: R.H., (,2*), Medium Graphite , Note: for use only on 1998 windstars without the letter "Z" in the fourth position of the Vehicle identification number (VIN).
Position: Passenger Side
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1998 Ford Windstar | 3.0L, Base, GL, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
Other Name: Seat Belt Assembly; Outer Belt Assembly
Manufacturer Note: L.H., (,2*), Medium Graphite , Note: for use only on 1998 windstars without the letter "Z" in the fourth position of the Vehicle identification number (VIN).
Position: Driver Side
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1998 Ford Windstar | 3.0L, Base, GL, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1995-1997 Ford Windstar | Base, GL, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
| Page 1 of 5 |Next >
1-20 of 86 Results
Ford Windstar Seat Belt
Welcome to our website where you can discover high-quality, genuine Ford Windstar Seat Belt. We offer an extensive inventory of OEM Ford Windstar Seat Belt at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to Service the Center Seat Belt of the Third Seat on Ford Windstar?
A: In order to service the center seat gear of the third seat, take out the seat and J retainers. When installing the new seat belt use Ford Threadlock 262 (E2FZ-19554-B) on the buckle or retractor fasteners. Undo the steps made to remove and done to install the restraint system in order to make sure the system works.
Q: Should All Seat Belt Assemblies Be Inspected After Any Collision, and What Steps Should Be Taken if Damage Is Found on Ford Windstar?
A: Any collision should check the seat belt assembly. Unless a qualified technician can confirm that there is no damage, new assemblies need to be carried out. Periodical examinations should be conducted, in particular, following intensive stress. Check retaining areas prior to installation, and instructions on new seat belts and functional tests.