OEM Lincoln Blackwood Seat Switch

Lincoln Blackwood Seat Switch Parts Questions & Experts Answers

• Control Switch, Front
  1L2Z-14A701-AA
  Q: How should one service and repair the power seat switch while ensuring safety when working on an air bag supplemental restraint system (SRS) on Lincoln Blackwood?

  A: Service and repair of power seat switches requires safety glasses for working on vehicles equipped with air bag supplemental restraint system (SRS) to protect against potential dangerous deployment incidents. Start any front or side SRS component service by disconnecting the battery ground cable then verifying the back up power supply depletion after waiting one minute before disconnecting auxiliary batteries and power supplies. Executables will handle the SRS deactivation procedure properly. Start by removing the affected seat through these steps: remove its screw then unfasten the seat latch handle and detach the seat control and climate control switch electrical connectors at the seat cushion frame front underside. Remove all screws then the pin-type retainer and side shield from the seat cushion frame along with the power lumbar switch disconnection and unharnessing of wires through the frame. Finish the installation by unscrewing the seat control switch which remains on the side shield. The SRS must be reactivated during installation followed by a check for proper operation of the active restraint system once all diagnostic tools are removed from the vehicle because these tools are for service purposes only and must not be left inside during driving to protect safety standards.