Other Name: Motor And Fan Assembly - Engine Cooling; Fan Assembly; Fan Module
Replaces: L1MZ-8C607-B, RF-418
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Motor And Fan Assembly - Engine Cooling; Engine Cooling Fan Shroud; Fan Assembly; Fan Module
Replaces: L1MZ-8C607-A, RF-417
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to service and repair the Coolant Reservoir, Cooling Fan Assembly, Fan Shroud and Radiator on Lincoln Aviator?
A: To service the fan shroud, drain the cooling system, detach the front air deflector and disconnect battery ground cable. Install the instructions given to remove the cooling fan. Installation is done in reverse, fill and bleed the cooling system. And take out the splash shield to reach the transmission fluid cooler retainers.
Q: How to service the Cooling Fan Assembly and Fan Clutch on Lincoln Navigator?
A: In order to service the cooling fan and clutch, it is required to first unscrew the four bolts that hold the fan in place on the clutch and then unscrew the clutch on the fan. When reassembling, attach the bolts to 17 Nm (13 ft. lbs. ), and use the disassembly procedure in reverse.