Navigator | 2004-2017 | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Other Name: Switch Assembly; Door Lock Switch; Release Switch
Position: Driver Side
Replaced by: LC5Z-14018-BB
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Switch Assembly - Front Door - Center; Door Lock Switch; Switch Assembly - Front Door - Central
Position: Front Center Passenger Side
Fits the following Lincoln Models:
MKC | 2015-2019 | Base, Black Label, Premiere, Reserve, Select | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
MKS | 2013-2016 | Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
MKT | 2013-2019 | Base, EcoBoost, Livery, Premiere, Reserve | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
MKX | 2016-2018 | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
MKZ | 2013-2020 | Base, Black Label, Black Label Hybrid, Hybrid, Premiere, Premiere Hybrid, Reserve, Reserve Hybrid, Reserve I, Reserve I Hybrid, Reserve II, Reserve II Hybrid, Select, Select Hybrid | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Nautilus | 2019-2023 | Base, Black Label, Reserve, Select | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS
Q: How to Service the Door Jamb Switch on Lincoln Navigator?
A: In order to service the door ajar switch, begin by removing the door latch. Then remove the door ajar switch by pressurising the locking tab of the door lock actuator and eject it. Lastly, again, release the locking tab to remove the door ajar switch. To install, just do the steps of removal in reverse.
Q: How to Service and Repair the Door Jamb Switch on Lincoln Town Car?
A: In order to replace the door ajar switch, begin by removing the front or rear door panel of trim. Un-screw the electrical connector and un-screw the screw that secures it to the switch and remove the switch. In order to install again, just undo the steps of removal.