Other Name: Bulb; Turn Signal & Parking Light Bulb, Front; Side Marker Light; Headlight Bulbs; Car Bulbs; Parking Lamp Bulb; Signal Bulb; Exterior Bulbs
Position: Front
Replaces: F5DZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2004-2006 Lincoln LS | Appearance, Base, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
Other Name: Bulb; Center High Mount Stop Light Bulb; Back Up Light Bulb; License Plate Light Bulb; Turn Signal Light Bulb; Signal Lamp Bulb; various types for exterior and interior lighting.
Position: Rear Outer
Replaces: E9JY-13466-A, F4ZZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2000-2006 Lincoln LS | Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
Other Name: Bulb And Socket Assembly; Headlight Bulbs; Car Bulbs; High Beam Bulb
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2003-2006 Lincoln LS | Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
Lincoln LS Headlight Bulb
Welcome to our website where you can discover high-quality, genuine Lincoln LS Headlight Bulb. We offer an extensive inventory of OEM Lincoln LS Headlight Bulb at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to service the headlight bulb on Lincoln LS?
A: To replace the headlamp bulb remove the upper sight shield and retainers. Manipulation of the halogen bulb must be done by touching its base not to break. Store the bulb in the assembly until it needs to be replaced. Turn both switches off, unscrew the electrical connector and take out the bulb. Installation Repeat the steps in reverse.
Q: How to service the Headlight Bulb for High Intensity Discharge (HID) headlamps on Lincoln LS?
A: In order to replace the HID headlamp, unscrew the headlamp covers and assembly. Unscrew the ballast, unscrew the electrical connector, and handle the bulb carefully so that it does not break. Installation of the new bulb is by reversing the sequence. Repeat the same with the high beam bulb and make sure that you handle it carefully.