FordParts
My Garage
My Account
Cart
OEM Lincoln Mark LT Leaf Spring
Leaf Helper Spring- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Leaf Springs found
Lincoln Mark LT Leaf Spring, Rear
Part Number: 6L3Z-5560-MD$415.61 MSRP: $610.30You Save: $194.69 (32%)Ships in 1-3 Business Days
Lincoln Mark LT Leaf Spring, Rear
Part Number: 6L3Z-5560-RD$274.29 MSRP: $376.33You Save: $102.04 (28%)Lincoln Mark LT Leaf Spring, Rear
Part Number: 4L3Z-5560-RCLincoln Mark LT Leaf Spring, Rear
Part Number: 4L3Z-5560-PCLincoln Mark LT Leaf Spring, Rear
Part Number: 4L3Z-5560-MCLincoln Mark LT Leaf Spring, Rear
Part Number: 4L3Z-5560-SC
Lincoln Mark LT Leaf Spring
Welcome to our website where you can discover high-quality, genuine Lincoln Mark LT Leaf Spring. We offer an extensive inventory of OEM Lincoln Mark LT Leaf Spring at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Lincoln Mark LT Leaf Spring Parts Questions & Experts Answers
- Q: How to remove and install the leaf spring on Lincoln Mark LT?A: First position the vehicle on a hoist with NEUTRAL while supporting the axle via a suitable jack. Lower the Shock Absorber by removing its nut and bolt then reinstall new components while torquing them to 90 Nm (66 ft. lbs.). Light duty vehicles require removing 4 U-bolt nuts together with the U-bolt plate and U-bolts before discarding both components. The procedure requires tightening four U-bolt nuts at specific torque levels beginning with 35 Nm (26 ft. lbs.) then 70 Nm (52 ft. lbs.) and 100 Nm (74 ft. lbs.) and ending at 133 Nm (98 ft. lbs.). Heavy duty vehicles require following the same removal procedure while tightening the U-bolt nuts in four stages starting from 63 Nm (46 ft. lbs.) to 125 Nm (92 ft. lbs.), 188 Nm (139 ft. lbs.) and finishing at 250 Nm (184 ft. lbs.). To gain access to the spring shackle-to-frame bolt users should lower the fuel tank but if working with the right rear spring they must first remove the muffler for spring-to-frame bolt access. Discard the spring-to-frame nut and bolt then install new ones that you should tighten to 350 Nm (258 ft. lbs.). Tighten the new installation of spring shackle-to-frame nut and bolt to 133 Nm (98 ft. lbs.) after discarding old parts. The axle should be positioned low enough to take out both spring and shackle components. You may need to remove the spring-to-shackle nut, bolt and spring shackle before discarding the nut and bolt while you tighten the new components to 133 Nm (98 ft. lbs.). For four wheel drive vehicles ensure that the space is placed between the axle and spring stack with the pointed nose pointing inward before installing while confirming that both spring-to-frame bolt and nut match the exploded view drawing.
Related Lincoln Mark LT Parts
Lincoln Mark LT Axle Vent
Lincoln Mark LT Bump Stop
Lincoln Mark LT CV Boot
Lincoln Mark LT Coil Springs
Lincoln Mark LT Leaf Spring Bushing
Lincoln Mark LT Leaf Spring Plate
Lincoln Mark LT Leaf Spring Shackle
Lincoln Mark LT Shock Absorber
Lincoln Mark LT Shock And Strut Mount
Lincoln Mark LT Spare Wheel
Lincoln Mark LT Steering Knuckle
Lincoln Mark LT Wheel Cover