How to service and repair the alternator on Lincoln MKS?

Service and repair procedures of the alternator require initial steps which include disconnecting the battery followed by engine cover removal. Position the upper radiator hose to the side then disconnect the radiator hose support cradle. Begin by moving the generator protective cover away from the equipment and then take out the B+ nut before setting the terminal aside. The generator electrical connector needs to be detached then the harness should be set in an accessible spot. Through accessory drive belt tensioner rotation you can remove the generator belt from its position. Start by detaching the upper generator nut and stud before loosening the lower generator bolt in order to remove the generator. To install the generator position it first then hand-tighten the lower bolt before attaching the upper stud and nut while tightening the stud to 8 Nm (71 lb-in) and the nut to 47 Nm (35 lb-ft). The lower generator bolt reaches 47 Nm (35 lb-ft) torque setting before rotating the accessory drive belt tensioner for generator accessory belt installation. The generator electrical cable needs to be connected along with the B+ terminal installation before tightening the B+ terminal nut to 17 Nm (150 lb-in). In conclusion replace the upper radiator hose support cradle, relocate the upper radiator hose, install the engine cover and restore the battery cable connection.

OEM Lincoln MKS Alternator

Generator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Alternators found

View related parts
Lincoln MKS Alternator Part Number: 8G1Z-10346-A
$237.00 MSRP: $390.91
You Save: $153.91 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Remanufactured Denso First Time Fit Alternator Assembly.
- Replaces: 7T4Z-10346-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Alternator Part Number: DG1Z-10346-B
$293.94 MSRP: $485.45
You Save: $191.51 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Alternator Assembly; Reman Alternator
- Manufacturer Note: 200 Amp
- Replaces: AA5Z-10346-B, GL-980
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2016 Lincoln MKS | EcoBoost | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKS Alternator Part Number: DG1Z-10346-F
$321.32 MSRP: $530.91
You Save: $209.59 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Alternator Assembly; Reman Alternator
- Manufacturer Note: 175 AMP
- Replaces: 8A4Z-10346-A, GL-933, DG1Z-10346-A, GL-8664
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2016 Lincoln MKS | Base | 6 Cyl 3.7 L GAS

Lincoln MKS Alternator

OEM Alternator boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Alternator with long life and a perfect fit. Come to our website and find genuine Lincoln MKS parts. We keep a wide inventory of OEM MKS parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Lincoln MKS alternator is one of the most important parts that signify the dependability and power of the Lincoln luxury car which was manufactured from 2008 to 2016. This alternator effectively charges the battery and converts mechanical energy to electrical energy so that electrical systems in Lincoln MKS runs smoothly. Constructed as an improvement to earlier models, the Alternator uses a belt-driven rotor to create a magnetic field to produce voltage necessary in DC current recharging the battery and powering other electrical equipment. This integration goes further in contributing to the improvement of the Lincoln MKS with efficiency while also vital for safety as voltage output is also controlled to avoid battery problems. Available for wide range of MKS models, Alternator is very suitable for fitting into a standard or accessorized car and thus is ideal for the auto market. Their high performance responds the growing electric consumption of the current parts and leaves the Lincoln MKS fully compliant with any status. Furthermore, the variation of the alternator by the Powertrain Control Module (PCM) in new models is one of the latest achievements in auto-making industry. In general, the Alternator is one of the perfect examples to depict that how the Lincoln brand values quality and sophistication in improving the driving experience of the Lincoln MKS and giving a great looks and performance to it.

Lincoln MKS Alternator Parts and Q&A

Alternator
DG1Z-10346-F
Q: How to service and repair the alternator on Lincoln MKS?
A:
Service and repair procedures of the alternator require initial steps which include disconnecting the battery followed by engine cover removal. Position the upper radiator hose to the side then disconnect the radiator hose support cradle. Begin by moving the generator protective cover away from the equipment and then take out the B+ nut before setting the terminal aside. The generator electrical connector needs to be detached then the harness should be set in an accessible spot. Through accessory Drive Belt tensioner rotation you can remove the generator belt from its position. Start by detaching the upper generator nut and stud before loosening the lower generator bolt in order to remove the generator. To install the generator position it first then hand-tighten the lower bolt before attaching the upper stud and nut while tightening the stud to 8 Nm (71 lb-in) and the nut to 47 Nm (35 lb-ft). The lower generator bolt reaches 47 Nm (35 lb-ft) torque setting before rotating the accessory drive belt tensioner for generator accessory belt installation. The generator electrical cable needs to be connected along with the B+ terminal installation before tightening the B+ terminal nut to 17 Nm (150 lb-in). In conclusion replace the upper radiator hose support cradle, relocate the upper radiator hose, install the engine cover and restore the Battery Cable connection.