OEM Lincoln MKS Vapor Canister

Lincoln MKS Vapor Canister Parts Questions & Experts Answers

• Vapor Canister
  AG1Z-9D653-D
  Q: How to Service and Repair the Vapor Canister on Lincoln MKS?

  A: Before performing service or repair on the Evaporative Emission Control Canister start by positioning the vehicle on hoist with NEUTRAL gear select and disconnecting the battery ground cable. Disconnection of the ground cable from the battery ensures electrical safety during work. You must clean both the EVAP canister vent solenoid electrical connector along with its vicinity until all foreign substances are removed before removing the vent solenoid electrical connector. The procedure starts with removing the fuel vapor tube-to-EVAP canister quick connect coupling before disconnecting the fuel vapor tube assembly-to-EVAP canister quick connect coupling and finishing with the fresh air hose-to-dust separator. You must uninstall the four EVAP canister nuts but remember to torque all of them to 9 Nm (80 lb-in) during reinstallation. You must remove the EVAP canister after you remove the rivet. The new canister installation requires following the reversal of removal steps along with performance of the Evaporative Emission System Leak Test to verify proper system operation.