How to Safely Service and Repair a Fuel Level Sensor on Lincoln MKX?

Safety requires that fuel level sensor service must avoid all activities which produce open flames or burning tobacco objects or smoking near the components since fuel mixtures remain highly flammable and can result in life-threatening injuries. All personal electronic equipment needs storage during this procedure. Handle all fuel carefully while being ready to address possible spills that can catch fire from hot vehicle elements. Start the process by cutting power to the ground cable. To access the fuel tank you should turn the cap clockwise one-fourth turn and then place it safely in a location. Insert a semi-rigid fuel drain tube of 120 inches into the fuel tank filler pipe until the tube reaches the fuel tank position. Before starting drain 3 gallons of fuel to safely lower the fuel tank liquid below where the sensor mounting flange is positioned. First remove all bolts holding the fuel level sensor access cover along with the rear seat. First clean the fuel level sensor connective area and its surrounding region before removing the electric connector. Use absorbent pads to place in your working area for any fuel spills prevention. After releasing the lock tab the fuel level sensor should be rotated counterclockwise for one-fourth of a turn and then lifted out. Check the fuel level sensor flange mating surfaces but do not adjust or polish the area that touches the fuel tank O-ring seal. A new fuel level sensor or fuel tank must be installed when the O-ring contact area shows bent or scratched or corroded condition. The installation process requires the O-ring seal to receive a treatment of clean engine oil. The installation requires users to apply strong pressure on the fuel level sensor while rotating it clockwise until the lock arrow matches the tank notch at less than 15 Nm (133 lb-in) of torque. Complete the installation by following the reverse steps of removal.

OEM Lincoln MKX Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Fuel Level Sensors found

View related parts
Lincoln MKX Fuel Pump, Driver Side Part Number: F2GZ-9H307-S
$466.49 MSRP: $747.27
You Save: $280.78 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Fuel Pump and Sender Assembly, Left; Fuel Pump Module Assembly
- Position: Driver Side
- Replaces: F2GZ-9H307-J, PFS-1076
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS
View related parts
Lincoln MKX Fuel Pump Part Number: FT4Z-9350-B
$299.64 MSRP: $440.00
You Save: $140.36 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Fuel; Direct Injection High Pressure Fuel Pump
- Replaces: FT4Z-9350-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS
View related parts
Lincoln MKX Fuel Gauge Sending Unit Part Number: 7T4Z-9A299-B
$37.20 MSRP: $51.46
You Save: $14.26 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKX Fuel Gauge Sending Unit, Passenger Side Part Number: F2GZ-9A299-B
$119.08 MSRP: $189.09
You Save: $70.01 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Right Fuel Sender and Hanger; Fuel Transfer Unit; Level Sensor.; Fuel Sender Unit
- Manufacturer Note: Sender For 9275 Fuel Pump
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Fuel Gauge Sending Unit, Driver Side Part Number: F2GZ-9A299-A
$143.13 MSRP: $227.27
You Save: $84.14 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly, Left; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
- Manufacturer Note: Sender For 9H307 Fuel Pump
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Fuel Gauge Sending Unit, Driver Side Part Number: F2GZ-9A299-D
$122.52 MSRP: $194.55
You Save: $72.03 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Pump Module Assembly; Fuel Level Sensor; Fuel Sending Unit; Fuel Pump Module; Fuel Sender Unit
- Manufacturer Note: Sender For 9H307 Fuel Pump
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Fuel Gauge Sending Unit, Driver Side Part Number: F2GZ-9A299-C
$115.88 MSRP: $194.55
You Save: $78.67 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly, Left; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
- Manufacturer Note: Sender For 9H307 Fuel Pump
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Fuel Pump, Passenger Side Part Number: F2GZ-9275-B
$222.46 MSRP: $356.36
You Save: $133.90 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Transfer Unit
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Fuel Pump, Passenger Side Part Number: F2GZ-9275-A
$246.30 MSRP: $394.55
You Save: $148.25 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Right Fuel Pump and Sender; Fuel Transfer Unit.
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Fuel Gauge Sending Unit Part Number: DT4Z-9A299-A
$68.45 MSRP: $114.91
You Save: $46.46 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger; Fuel Pump Module; Fuel Level Sensor; Sending Unit.; Fuel Sender Unit
- Replaces: BT4Z-9A299-B, PS-426
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Lincoln MKX | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Fuel Gauge Sending Unit Part Number: BT4Z-9A299-A
$36.53 MSRP: $58.00
You Save: $21.47 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger; Fuel Pump Module; Fuel Level Sensor; Sending Unit.; Sending Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Lincoln MKX | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Fuel Pump Part Number: BT4Z-9275-A
$56.47 MSRP: $92.91
You Save: $36.44 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger; Fuel Level Sensor; Sending Unit; Fuel Sender Unit; Sender Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Lincoln MKX | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Fuel Pump Part Number: 7T4Z-9275-B
$59.67 MSRP: $98.18
You Save: $38.51 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Transfer Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKX Fuel Gauge Sending Unit Part Number: 7T4Z-9A299-A
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS

Lincoln MKX Fuel Level Sensor

OEM Fuel Level Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Level Sensor with long life and a perfect fit. Come to our website and find genuine Lincoln MKX parts. We keep a wide inventory of OEM MKX parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Fuel Level Sensor is one of the components that ensure fuel efficiency and represent the reliable and performing automobiles of Lincoln. As intended for measuring fuel quantity, this component is installed either in the fuel tank or on the fuel pump carrier bracket to give signals to the driver regarding refuelling. The Fuel Level Sensor employs the use of a complex float assembly that comprises of a float, an actuating rod, and a resistor that gives fuel level information to the fuel gauge system in the vehicle. The current versions of the Fuel Level Sensor are electronic to provide high efficiency and high accuracy regardless of the lowest or highest temperatures. This reliability is desirable in increasing, not only the effectiveness of the Lincoln MKX but the safety as well since misreadings of the tank can cause fuel emergencies. Available for installation in different models of the Lincoln MKX, the Fuel Level Sensor attracts the attention of consumers with its easy calibration and enhanced durability. What is particularly worth mentioning is that such a sensor guarantees the correct information on the fuel level and thus minimizes the drivers' concerns with regard to the car's fuel shortage during the trip. The Fuel Level Sensor is a marvelous feature which reflects the Lincoln's resolution to provide reliable mpg technology with the right integration of technology and dependability in the Lincoln vehicles.

Lincoln MKX Fuel Level Sensor Parts and Q&A

Fuel Pump
7T4Z-9275-B
Q: How to Safely Service and Repair a Fuel Level Sensor on Lincoln MKX?
A:
Safety requires that fuel level sensor service must avoid all activities which produce open flames or burning tobacco objects or smoking near the components since fuel mixtures remain highly flammable and can result in life-threatening injuries. All personal electronic equipment needs storage during this procedure. Handle all fuel carefully while being ready to address possible spills that can catch fire from hot vehicle elements. Start the process by cutting power to the ground cable. To access the fuel tank you should turn the cap clockwise one-fourth turn and then place it safely in a location. Insert a semi-rigid fuel drain tube of 120 inches into the fuel tank filler pipe until the tube reaches the fuel tank position. Before starting drain 3 gallons of fuel to safely lower the fuel tank liquid below where the sensor mounting flange is positioned. First remove all bolts holding the fuel level sensor access cover along with the rear seat. First clean the fuel level sensor connective area and its surrounding region before removing the electric connector. Use absorbent pads to place in your working area for any fuel spills prevention. After releasing the lock tab the fuel level sensor should be rotated counterclockwise for one-fourth of a turn and then lifted out. Check the fuel level sensor flange mating surfaces but do not adjust or polish the area that touches the fuel tank O-ring seal. A new fuel level sensor or fuel tank must be installed when the O-ring contact area shows bent or scratched or corroded condition. The installation process requires the O-ring seal to receive a treatment of clean engine oil. The installation requires users to apply strong pressure on the fuel level sensor while rotating it clockwise until the lock arrow matches the tank notch at less than 15 Nm (133 lb-in) of torque. Complete the installation by following the reverse steps of removal.